Bogen C20

Bogen Klasiko Seriea Amp C20 Argibideen eskuliburua

Eredua: C20

1. Sarrera

This manual provides essential instructions for the proper installation, operation, and maintenance of your Bogen Classic Series Amp C20. Please read this manual thoroughly before using the product to ensure safe and efficient performance. Retain this manual for future reference.

2. Segurtasun informazioa

KONTUZ: Produktu honek Kaliforniako estatuak minbizia eta jaiotzako akatsak edo ugalketa beste kalteak eragiten dituela ezagutzen dituen produktu kimikoak ditu.

Always observe basic safety precautions when using electrical equipment to reduce the risk of fire, electric shock, and injury to persons.

3. Produktua amaitu daview

The Bogen Classic Series Amp C20 is a single-channel amplifier designed for various audio applications. It features robust construction and reliable performance.

3.1 Ezaugarri nagusiak

3.2 Paketearen edukia

Desontziratzean, egiaztatu elementu hauek daudela barne:

3.3 Aurreko paneleko kontrolak eta adierazleak

Aurrealdea view of Bogen Classic Series Amp C20 showing controls

Image 1: Front panel of the Bogen Classic Series Amp C20. This image displays the MIC1, MIC2, AUX, and TREBLE control knobs, along with the POWER switch and the "Classic Series" branding.

  1. MIC1 Input Level Control: Adjusts the volume for Microphone Input 1.
  2. MIC2 Input Level Control: Adjusts the volume for Microphone Input 2.
  3. AUX Input Level Control: Adjusts the volume for the Auxiliary input.
  4. GOIKOEN kontrola: Adjusts the high-frequency response of the audio output.
  5. POWER switch: Txandakatzen ditu amplifier-aren piztu eta itzali.

3.4 Atzeko panelaren konexioak

Atzekoa view of Bogen Classic Series Amp C20 showing connections

Image 2: Rear panel of the Bogen Classic Series Amp C20. This image shows the various input and output connections, including power input and speaker terminals.

The rear panel contains connections for power, microphone inputs, auxiliary inputs, and speaker outputs. Specific details on these connections are provided in the Setup section.

4. Konfigurazioa eta instalazioa

4.1 Muntaketa

The Bogen Classic Series Amp C20 is designed for surface mounting. Ensure the mounting surface is stable and capable of supporting the unit's weight (approximately 4.5 pounds). Allow adequate ventilation around the unit to prevent overheating.

4.2 Konexio elektrikoa

  1. Ensure the POWER switch on the front panel is in the OFF position.
  2. Connect the power cord to a standard 120 Volt AC outlet.

4.3 Audio Sarrerako Konexioak

Connect your audio sources to the appropriate inputs on the rear panel:

4.4 Bozgorailuen irteerako konexioak

Connect your speakers to the speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for all speaker connections. Refer to your speaker's manual for impedance matching requirements.

5. Funtzionamendua

5.1 Piztu/Itzaltzea

  1. Pizteko amplifier, press the POWER switch on the front panel to the ON position. The power indicator (if present) will illuminate.
  2. To power off, press the POWER switch to the OFF position.

5.2 Sarrera mailak doitzea

  1. Start with all input level controls (MIC1, MIC2, AUX) set to their minimum position.
  2. Begin playing audio from your desired source.
  3. Slowly increase the corresponding input level control until the desired volume is achieved.
  4. Adjust the TREBLE control to fine-tune the high-frequency response to your preference.

5.3 Erabilera aholku orokorrak

6. Mantentzea

6.1 Garbiketa

Garbitu kanpoaldea amplifier with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners, as they may damage the finish or internal components.

6.2 Aireztapena

Aireztapen-irekiduretatik hautsik eta hondakinik gabe daudela egiaztatu aldizka, aire-fluxu egokia bermatzeko eta gehiegi berotzea saihesteko.

6.3 Zerbitzua

Ez dago erabiltzaileek zerbitzurako piezarik barruan ampargitzaile. Jarri zerbitzu-zerbitzu guztiak zerbitzu-pertsonal kualifikatuari.

7. Arazoak

If you experience issues with your Bogen Classic Series Amp C20, consult the following table before contacting support.

ArazoaKausa posibleaIrtenbidea
Ez dago soinu irteerarik.
  • Energia ez dago konektatuta edo piztuta.
  • Input source not connected or playing.
  • Input level controls set too low.
  • Speaker connections incorrect or loose.
  • Verify power connection and switch position.
  • Check audio source and its connection to the ampbiziagoa.
  • Increase input level controls gradually.
  • Inspect and secure all speaker wiring.
Soinu distortsionatua.
  • Input level too high.
  • Bozgorailuen inpedantzia desorekatua.
  • Reduce input level controls.
  • Ziurtatu bozgorailuak bateragarriak direla amplifier's output impedance.
Static or crackling from knobs.Dust or oxidation on control potentiometers.Consult qualified service personnel for cleaning or replacement of potentiometers.
Unit becomes excessively warm or emits odor.
  • Aireztapen eskasa.
  • Barne osagaien arazoa.
  • Ziurtatu aire-fluxu egokia unitatearen inguruan.
  • Immediately power off the unit and disconnect from power. Contact qualified service personnel.

8. Zehaztapenak

EzaugarriXehetasuna
MarkaBogen
EreduaC20
Elementuaren eredu-zenbakiaC20
Fabrikatzailearen pieza zenbakiaC20
Elementuaren neurriak (L x W x H)11.37 x 7.37 x 2.87 hazbete
Produktuaren neurriak11.37 x 7.37 x 2.87 hazbete
Elementuaren pisua4.5 kilo
liburukiatage120 Volt
Wattage50 watt
Irteera Potentzia20 Watt
Kanal kopurua1
Muntatze MotaGainazaleko muntaia
FabrikatzaileaBogen
UPC765368330250
Eskuragarri dagoen lehen data16ko uztailaren 2004a

Oharra: zehaztapenak aldatu egin daitezke, jakinarazi gabe.

9. Bermea eta Laguntza

Bermeari buruzko informazioa eta laguntza teknikoa lortzeko, jo Bogen-en webgune ofizialera. webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.

Harremanetarako informazioa: