KC HiLiTES 517 2x6 55W Back Up/Flood Light System Instruction Manual

Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your KC HiLiTES 517 2x6 55W Back Up/Flood Light System. This system is designed to provide increased illumination for wider areas, suitable for applications such as reverse lighting.

Paketearen edukia

• Two fully assembled KC 26 Series Low Profile Rectangular Plastic Housing lights
• Two 55 Watt H3 Halogen Bulbs (replaceable)
• Complete wiring harness with relay
• Muntatzeko bi euskarri
• Hari-juntura-konektoreak
• Wire snake (split tubing) for wire protection
• Zip ties (note: additional zip ties may be required for a complete installation)

Konfigurazioa eta Instalazioa

Instalazio orokorra amaituview

The KC HiLiTES 517 system includes a complete wiring harness and mounting brackets for installation. The kit is designed to be wired to your vehicle's reverse lights, activating automatically when reverse gear is engaged.

Image: Components of the KC HiLiTES 517 system, showing the two flood lights, wiring harness, relay, and mounting hardware.

Kableatzeko jarraibideak

The included wiring harness features a relay. This relay allows the new backup lights to draw power directly from the vehicle's electrical system without overloading the existing OEM backup light circuit. Identify the correct wire for your vehicle's reverse lights to tap into for the relay's trigger signal.

Argiak muntatzea

The system includes two mounting brackets. These lights can be mounted in various locations, such as under the bumper or on the rear of a trailer.

• Orientazioa: When installing, observe the lens for etched markings such as "TOP" or "FLOOD". Ensure the lens and bezel are oriented correctly for optimal light distribution. Incorrect orientation may reduce the effectiveness of the flood beam pattern.
• Zulaketa: Depending on the mounting location, drilling holes in the vehicle's bumper or frame may be necessary.

Hari babesa

Utilize the provided wire snake (split tubing) and zip ties to protect the wiring harness from abrasion and environmental elements. Secure all wiring to prevent sagging or contact with moving parts.

Funtzionamendu-argibideak

Once properly installed and wired to your vehicle's reverse lights, the KC HiLiTES 517 Back Up/Flood Light System will activate automatically when the vehicle is shifted into reverse. The 55W H3 halogen bulbs provide a flood beam pattern designed for improved vertical and horizontal visibility at short distances, enhancing visibility when backing up.

Mantentzea

Bonbilla ordezkatzea

The 55 Watt H3 Halogen bulbs are replaceable. To replace a bulb:

1. Remove the two screws securing the lens and reflector assembly.
2. Carefully remove the old H3 bulb.
3. Insert the new H3 bulb, ensuring it is seated correctly.
4. Reattach the lens and reflector assembly, securing it with the two screws.

Garbiketa

Regularly clean the lenses with a mild soap solution and a soft cloth to maintain optimal light output. Avoid abrasive cleaners that could scratch the lens surface.

Hardwarearen ikuskapena

Periodically inspect all mounting hardware and screws for tightness and signs of corrosion. While the lights are designed for outdoor use, some hardware components may show signs of rust over time. If rust becomes an issue, consider replacing standard screws with stainless steel alternatives available at hardware stores.

Arazoak konpontzea

• Argiak ez dira pizten:
  • Check the fuse in the wiring harness.
  • Verify all electrical connections are secure and properly insulated.
  • Ensure the relay is correctly wired and functioning.
  • Confirm the H3 bulbs are properly seated and not burnt out.
  • Check the connection to the vehicle's reverse light circuit.
• Poor light pattern:
  • Verify the lights are mounted with the correct lens orientation (e.g., "TOP" marking facing upwards).
  • Ensure the lights are aimed correctly to provide the desired flood coverage.
• Corrosion on screws:
  • This can occur over time. Consider replacing affected screws with stainless steel hardware for improved longevity.

Zehaztapenak

Bermea eta Laguntza

The KC HiLiTES 517 system is backed by KC's 23-year warranty. For warranty claims, technical assistance, or product inquiries, please contact KC HiLiTES customer support.

Posta elektronikoa: support@kchilites.com

Telefonoa: 1 (928) 635-2607

For additional information and resources, visit the official KC HiLiTES webgunea.