NEC VT670 Value LCD Video Projector Instruction Manual

Sarrera

This manual provides essential instructions for the safe and efficient operation of your NEC VT670 Value LCD Video Projector. Please read this manual thoroughly before using the projector and keep it for future reference. The NEC VT670 is designed for clear image projection with a native resolution of 1024 x 768 and a brightness of up to 2,100 ANSI lumens.

1. irudia: Aurrealdea view of the NEC VT670 projector, showing the lens and front panel.

Konfigurazioa

Follow these steps to set up your NEC VT670 projector:

Lekua: Position the projector on a stable, flat surface or mount it according to the instructions for your specific mounting solution. Ensure adequate ventilation around the unit. The projector is designed for tabletop mounting.
Potentzia-konexioa: Connect the power cord to the projector's power inlet and then to a grounded electrical outlet.
Iturburu-konexioa: Connect your video source (e.g., computer, DVD player) to the appropriate input port on the projector. The VT670 supports VGA (D-Sub), S-Video, and composite video inputs. Use the color-coded connections for ease of setup.

Atzekoa view of the NEC VT670 projector showing input ports

2. irudia: Rear panel of the NEC VT670 projector, illustrating various input and output ports including VGA, S-Video, and audio connections.

Kable konexioak: Ensure all necessary cables, such as the VGA cable for computer input, are securely connected to both the projector and the source device.

VGA and power cables for projector connection

3. irudia: Example of a VGA cable (left) and a power cable (right) used for connecting the projector.

Audio konexioa: If your source provides audio, connect it to the projector's audio input ports. The projector features built-in speakers.
Hasierako piztea: Sakatu proiektorearen edo urrutiko agintearen pizteko botoia unitatea pizteko.

Funtzionamendu-argibideak

This section details the basic operation of your projector.

Piztu/Itzali

Pizteko, sakatu BOTEREA button once. The power indicator will illuminate.
Itzatzeko, sakatu BOTEREA button twice. The projector will enter a cooling cycle before shutting down completely.

Sarrera-iturria hautatzea

Erabili SARRERA or dedicated source buttons (e.g., ORDENAGAILUA 1, BIDEOA) on the control panel or remote to cycle through available input sources.

Goiena view of the NEC VT670 projector control panel

4. irudia: Top control panel of the NEC VT670 projector, showing power, input selection, and navigation buttons.

Fokua eta zoomaren doikuntza

Egokitu FOKUA ring on the lens until the image is sharp and clear.
Erabili ZOOM lever on the lens to adjust the image size to fit your screen.

Menu Nabigazioa

Sakatu MENUA button to access the on-screen display (OSD) menu.
Erabili gezi-botoiak (UP, BEHERA, EZKER, ESKUBINA) to navigate through menu options.
Sakatu SARTU or AUKERATU hautaketa baieztatzeko.
Sakatu EXIT or MENUA berriro sakatu OSD menua ixteko.

Mantentzea

Mantentze-lan erregularrak proiektorearen errendimendu optimoa bermatzen du eta bizitza luzatzen du.

Lamp Ordezkoa

Proiektorea lamp bizitza mugatua du. Noiz lamp adierazlea pizten bada edo irudia iluntzen bada, lamp Ordezkapena behar izatea gerta daiteke. Ikusi zerbitzu-eskuliburu osoa informazio zehatza lortzeko.amp Ordezkapen prozedurak. Utzi beti proiektorea guztiz hozten saiatu aurretik.amp ordezkoa.

Aire iragazkien garbiketa

Dust accumulation on the air filter can reduce cooling efficiency and affect projector performance. Clean the air filter regularly (e.g., every 100 hours of operation) by removing it and gently brushing off dust or using a vacuum cleaner. Replace the filter if it is damaged.

Lenteen garbiketa

Garbitu proiektorearen lentea astiro-astiro gainazal optikoetarako bereziki diseinatutako zapi leun eta lint-gabe batekin. Ez erabili garbitzaile urratzailerik edo indar gehiegirik.

Arazoak konpontzea

Atal honek aurki ditzakezun arazo ohikoenei irtenbideak eskaintzen ditu.

Arazoa	Kausa posiblea	Irtenbidea
Ez da irudirik bistaratzen	Elikatze-kablea deskonektatuta dago Sarrera-iturburu okerra hautatu da Iturburu-gailua ez dago piztuta edo seinalea ez du ematen Lentearen tapa jarrita	Egiaztatu konexio elektrikoak. Hautatu sarrera-iturri zuzena erabiliz SARRERA botoia. Ziurtatu iturburu-gailua piztuta eta behar bezala konfiguratuta dagoela. Kendu lentearen tapa.
Irudia lausoa da	Fokua ez da doitu Proiektorea pantailatik gertuegi/urrunegi dago	Egokitu FOKUA eraztuna lentean. Doitu proiektorearen distantzia edo erabili ZOOM palanka.
Soinurik ez	Audio kableak ez daude konektatuta Bolumena baxuegia Mute function active	Connect audio cables correctly. Increase volume using the projector's controls or remote. Desaktibatu mutu funtzioa.

Zehaztapenak

Key technical specifications for the NEC VT670 Value LCD Video Projector:

Ereduaren izena: VT670
Bistaratzeko mota: LCDa
Berezko ebazpena: 1024 x 768 (XGA)
Distira maximoa: 2,100 ANSI lumen
Kontraste-erlazioa: 400:1
Konektibitate Teknologia: VGA (D-Sub), S-Video, Composite Video
Hardware konexioa: D-Sub, VGA
Gehienezko irudiaren tamaina: 300 hazbete
Forma-faktorea: Eramangarria
Muntatze mota: Mahai gaineko muntaia
Kontroladore mota: Botoien Kontrola
Elementuaren pisua: 9.2 kilo
Ezaugarri gehigarriak: Bozgorailu integratuak
Onartutako seinaleak: PC, NTSC, PAL, SECAM, HDTV

Bermearen informazioa

The NEC VT670 Value LCD Video Projector comes with a 2 urteko bermea. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty card included with your product or contact NEC customer support.

Laguntza

For further assistance, technical support, or service inquiries regarding your NEC VT670 projector, please visit the official NEC website or contact their customer service department. Keep your product model number (VT670) and serial number ready when contacting support.

Sareko baliabideak: www.nec.com