1. Sarrera
The Nikon MC-36 Multi-Function Remote Cord is a versatile accessory designed to enhance your photographic control. This 33.5-inch cord provides both basic shutter release functionality and advanced programmable timer features, including intervalometer capabilities and long exposure control. It is compatible with Nikon SLR cameras equipped with a 10-pin connector.
Figure 1: Nikon MC-36 Multi-Function Remote Cord
The remote features an integrated LCD display for programming and monitoring settings, along with dedicated buttons for various functions. Its robust design includes a secure screw-in connector for reliable attachment to your camera.
2. Konfigurazioa
2.1 Bateriaren instalazioa
- Locate the battery compartment cover on the back of the MC-36 remote.
- Irristatu edo askatu estalkia konpartimentua irekitzeko.
- Sartu bi AAA pila, konpartimentuaren barruan adierazten den polaritate zuzena (+/-) ziurtatuz.
- Itxi bateriaren konpartimenduaren estalkia ondo.
Note: Batteries are not included with the MC-36. The manual shutter release function can operate without batteries, but timer functions require power.
2.2 Connecting to Camera
- Locate the 10-pin remote terminal on your Nikon SLR camera. This is typically found on the front or side of the camera body.
- Align the MC-36's 10-pin connector with the camera's terminal.
- Gently push the connector into the terminal until it is fully seated.
- Rotate the metal screw-in adapter on the MC-36 connector clockwise to secure it firmly to the camera, preventing accidental disconnection.
3. Funtzionamendu-argibideak
3.1 Basic Shutter Release
- Press the large circular shutter release button on the MC-36 halfway to activate autofocus and metering.
- Press the button fully to release the shutter and capture an image.
- For bulb exposures, press and hold the shutter release button. The camera will expose for as long as the button is held.
3.2 Timer Remote Functions (Intervalometer)
The MC-36 allows for precise control over exposure delay, long exposure duration, and interval shooting. Use the directional buttons and the 'SET' button to navigate and confirm settings on the LCD display.
- Delay (DELAY): Sets the time before the first exposure begins. Adjustable up to 99 hours, 59 minutes, 59 seconds.
- Long Exposure (LONG): Sets the duration of each exposure. Adjustable up to 99 hours, 59 minutes, 59 seconds. This function is used for bulb exposures where the camera's shutter speed is set to 'Bulb'.
- Interval (INTVL): Sets the time between the start of one exposure and the start of the next. Adjustable up to 99 hours, 59 minutes, 59 seconds. Ensure the interval is at least one second longer than the 'LONG' exposure time to allow for proper cycling.
- Number of Shots (N): Sets the total number of exposures to be taken. Adjustable from 1 to 999 shots.
3.3 Starting and Stopping Timer Functions
- After setting your desired parameters, press the 'TIMER START/STOP' button to initiate the sequence.
- To stop an ongoing sequence, press the 'TIMER START/STOP' button again.
3.4 Blokeo funtzioa
- The 'LOCK' switch (often a small slider or button) prevents accidental changes to settings or unintended shutter releases during operation or transport.
- Engage the lock after setting your parameters or when carrying the remote.
3.5 Atzeko argia
- The MC-36 features a backlight for the LCD display, useful in low-light conditions.
- Press the dedicated backlight button (if present, or a combination of buttons) to activate it. The backlight typically illuminates for a few seconds before turning off automatically to conserve battery power.
4. Mantentzea
4.1 Bateria ordezkatzea
Replace batteries when the low battery indicator appears on the LCD or if the timer functions become unreliable. Follow the battery installation steps in Section 2.1.
4.2 Garbiketa
- Wipe the remote's exterior with a soft, dry cloth.
- Zikinkeria egoskorrerako, apur bat lehortuampGarbitu oihal bat urarekin edo garbiketa-soluzio leun batekin, eta gero lehortu berehala.
- Do not use strong solvents or abrasive cleaners.
4.3 Kableen zaintza
To prolong the life of the remote cord, avoid sharp bends or excessive pulling on the cable, especially near the connectors. Store the cable loosely coiled to prevent strain on the internal wiring.
5. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Remote does not power on or display is blank. | Bateriak hilda edo gaizki instalatuta. | Check battery polarity or replace with fresh AAA batteries. |
| Shutter does not release. |
|
|
| Timer functions not working. |
|
|
| Cable appears damaged or intermittent connection. | Physical strain or wear on the cable. | Inspect the cable for visible damage. If damaged, contact Nikon support for repair or replacement options. |
6. Zehaztapenak
- Modelo zenbakia: 4917
- Produktuaren neurriak: Approximately 4 x 6 x 9 inches (remote unit)
- Elementuaren pisua: 0.705 ontza gutxi gorabehera
- Kablearen luzera: 33.5 hazbetekoa
- Energia iturria: 2 x AAA batteries (for timer functions)
- Konektibitate Teknologia: Wired (10-pin connector)
- Gailu bateragarriak: Nikon SLR Cameras with 10-pin remote terminal
- Ezaugarri berezia: Ergonomic design, Multi-function timer remote
7. Bermearen informazioa
The Nikon MC-36 Multi-Function Remote Cord comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Nikon webzure eskualderako gunea.
8. Laguntza
Laguntza gehiago, laguntza teknikoa edo zerbitzu-kontsultak egiteko, bisitatu Nikon laguntza ofiziala. website or contact Nikon customer service in your region. You can find contact information and frequently asked questions on their webgunea.
Nikon ofiziala Webgunea: https://www.nikonusa.com/