Produktua amaituview
The Permatex 81160 Hi-Temp Red Form-A-Gasket Silicone Sealant is a high-performance silicone gasket maker designed for high-temperature applications and heavy-duty use. It forms a durable, flexible, and waterproof seal, resisting temperatures from -65°F to 650°F (-54°C to 343°C) intermittently. This product is ideal for creating formed-in-place gaskets or sealing pre-cut gaskets in various automotive and industrial applications.
Image: Permatex 81160 Hi-Temp Red Form-A-Gasket Silicone Sealant tube. This image shows the product packaging, a red tube of sealant with the Permatex logo and product name.
Segurtasun Informazioa
Read all safety precautions before use. Do not handle until all safety instructions are understood.
Prebentzioa:
- Contains: Calcium carbonate, iron oxide.
- Lortu argibide bereziak erabili aurretik.
- Erabili norberaren babeserako ekipamendua behar den moduan.
Erantzuna:
- BEGIETAN BADA: Garbitu kontu handiz urarekin hainbat minutuz. Kendu ukipen lenteak, baldin badaude eta egiteko erraza bada. Jarraitu uretan. Begietako narritadurak irauten badu: Eskuratu medikuaren aholku/arreta.
- AZALA BADUZ: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Biltegiratzea:
- Babestu eguzki-argitik.
- Gorde ondo aireztatutako leku batean.
- Denda itxita.
Xedapena:
- Edukia/ontzia hondakinak ezabatzeko planta onartu batera bota.
- Mantendu haurren eskura.
Image: Back of Permatex 81160 packaging. This image displays the detailed safety warnings, directions for use, and precautionary statements in English and Spanish.
Aplikaziorako jarraibideak
Prestaketa:
- For best results, ensure surfaces are clean and dry.
Aplikazioa:
- Cut the nozzle to the desired bead size (typically 1/16" to 1/4" or 2 to 6mm).
- Apply a continuous bead of silicone to one surface, ensuring it surrounds all bolt holes.
- Muntatu piezak berehala silikona bustita dagoen bitartean.
- Finger tighten until material begins to squeeze out around the flange.
Curing and Finishing:
- Allow the sealant to dry for one hour, then tighten to torque specifications.
- Allow 24 hours for the sealant to fully cure before filling with fluids or returning to service.
- Replace the cap after use to prevent drying.
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
Image: Formed-in-Place Gasket. A hand applies Permatex sealant to an engine component, demonstrating the application process for creating a gasket.
Iradokitako Aplikazioak
Permatex 81160 Hi-Temp Red Form-A-Gasket Silicone Sealant is suitable for a variety of high-temperature and heavy-duty applications, including:
- Balbulen estalkiak
- Olio ontziak
- Timing covers
- Ur-ponpak
- Thermostat housings
- Transmisio-ontziak
Image: Suggested Applications. This banner image shows various engine components like valve covers and water pumps, highlighting the sealant's intended uses.
Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Materiala | Silikona |
| Kolorea | Gorria |
| Elementu Inprimakia | Likidoa |
| Unitate kopurua | 3.0 ontza fluidoa |
| Tenperatura Erresistentzia | -65°F to 650°F (-54°C to 343°C) intermittent |
| Uraren Erresistentzia Maila | Iragazgaitza |
| Elementuaren eredu-zenbakia | 81160 |
| Fabrikatzailearen pieza zenbakia | 81160 |
| Jatorrizko Herrialdea | Txina |
Arazoak konpontzea
If you encounter issues during or after application, consider the following:
- Isuria: Ensure surfaces were thoroughly cleaned and dried before application. Verify that a continuous bead was applied and that parts were assembled while the silicone was still wet. Allow the full 24-hour cure time before exposing to fluids or service.
- Itsaspen eskasa: Surface preparation is critical. Ensure all oil, grease, and old gasket material are removed. The sealant may not adhere properly to contaminated surfaces.
- Sendatzeko arazoak: Ensure the product was stored correctly and is within its shelf life. Proper ventilation during curing is also important.
For persistent issues, refer to the Permatex webwebgunean edo jarri harremanetan bezeroarentzako laguntzarekin.
Bermea eta Laguntza
For information regarding product warranty, technical support, or frequently asked questions, please visit the official Permatex webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria berme-erreklamazioetarako.