Sennheiser e 845-S Supercardioid Dynamic Vocal Microphone Instruction Manual

1. Sarrera

The Sennheiser e 845-S is a high-output supercardioid dynamic vocal microphone designed for speech, choirs, and close-miked singing. It features an extended high-frequency response and a supercardioid pickup pattern for enhanced signal output and clarity, even in high on-stage sound levels. The microphone maintains consistent sound quality across different proximity levels and offers excellent feedback rejection. Its robust all-metal construction and advanced shock-mounting minimize handling noise and interference, ensuring reliable performance.

Ezaugarri nagusiak hauek dira:

• Smooth tonal response with full dynamic range.
• Presence lift for vocal clarity and projection.
• Consistent on/off-axis and proximity response.
• Full metal construction for durability.
• Exceptional feedback rejection.
• Very good rejection of handling noise.
• Hum compensating coil.
• Integrated on/off switch for convenience.

2. Konfigurazioa

This section guides you through the initial setup of your Sennheiser e 845-S microphone.

2.1 Paketatzea

Kontu handiz atera osagai guztiak paketetik. Paketeak normalean honako hauek ditu:

• Sennheiser e 845-S microphone
• Mikrofono-klipa
• Eramateko poltsa

2.2 Mikrofonoa konektatzea

1. Lotu mikrofonoaren klip-a: Securely fasten the provided microphone clip to a microphone stand.
2. Mikrofonoa muntatu: Insert the e 845-S microphone into the microphone clip. Ensure it is firmly seated.
3. Konektatu XLR kablea: Connect a standard XLR cable (not included) to the XLR connector at the base of the microphone. Connect the other end of the XLR cable to your mixer, audio interface, or ampbiziagoa.

The microphone can be used either on a stand or held in hand, depending on your performance needs.

Image: Sennheiser e 845-S microphone showing the on/off switch and XLR connection point.

3. Mikrofonoaren erabilera

Understanding the characteristics of the e 845-S will help you achieve optimal sound performance.

3.1 Piztu/Itzali etengailua

The e 845-S model includes a convenient on/off switch located on the microphone body. Slide the switch to the "On" position to activate the microphone and to the "Off" position to mute it. This switch is designed to operate silently, preventing unwanted pops or clicks in your audio signal.

Image: Close-up of the Sennheiser e 845-S, highlighting the on/off switch.

3.2 Supercardioid Pickup Pattern

The e 845-S features a supercardioid pickup pattern. This means the microphone is most sensitive to sounds directly in front of it, with significant rejection of sounds from the sides and rear. This characteristic is ideal for isolating your vocal performance from other instruments or ambient stage noise, reducing the likelihood of feedback.

Important Note on Monitor Placement: Due to the supercardioid pattern, the microphone has a small "bunny tail" of sensitivity directly behind it. To prevent feedback, avoid placing monitor speakers directly behind the microphone, facing its rear. Instead, position monitors to the sides or slightly in front of the microphone, outside its primary pickup area.

3.3 Proximity Effect and Frequency Response

The e 845-S offers a consistent on/off-axis and proximity response. This ensures that your sound quality remains stable even if you move closer to or further away from the microphone. Its extended high-frequency response (up to 16 kHz) provides clear and open vocal reproduction, while the presence lift enhances vocal clarity and projection.

4. Mantentzea

Proper maintenance ensures the longevity and optimal performance of your microphone.

• Garbiketa: Use a soft, dry cloth to wipe the microphone body. For the grille, a soft brush can remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
• Biltegiratzea: When not in use, store the microphone in its provided carrying pouch to protect it from dust, moisture, and physical damage.
• Manipulazioa: While the e 845-S has a rugged metal body, avoid dropping or subjecting it to excessive force, as this can damage internal components.
• Hezetasuna: Keep the microphone away from liquids. If it gets wet, disconnect it immediately and allow it to dry completely before use.

5. Arazoak

If you encounter issues with your e 845-S microphone, refer to the following common troubleshooting steps:

• Soinu-irteerarik ez:
  • Ensure the on/off switch on the microphone is in the "On" position.
  • Egiaztatu XLR kablearen konexio guztiak bai mikrofonoan bai nahasgailu/interfazean.
  • Verify that the input channel on your mixer/interface is selected and its gain is appropriately set.
  • Probatu beste XLR kable batekin kablearen akatsa baztertzeko.
• Feedback (High-Pitched Squeal):
  • Reposition monitor speakers so they are not directly behind the microphone, facing its rear.
  • Reduce the gain on the microphone input channel.
  • Move the microphone further away from speakers.
  • Ensure the microphone is pointed directly at the sound source (e.g., your mouth) and not towards speakers.
• Low Output Level:
  • Increase the gain on the mixer/interface input channel.
  • Ensure the microphone is positioned close enough to the sound source.
• Soinu distortsionatua:
  • Murriztu zure nahasgailuaren/interfazearen sarrerako irabazia mozketa saihesteko.
  • Ensure the microphone is not being overdriven by an excessively loud sound source.

6. Zehaztapenak

Detailed technical specifications for the Sennheiser e 845-S microphone.

7. Bermea eta Laguntza

The Sennheiser e 845-S microphone comes with a 10 urteko fabrikatzailearen bermea, epe luzerako fidagarritasuna eta lasaitasuna bermatuz.

For further support, technical assistance, or warranty claims, please visit the official Sennheiser webwebgunean edo jarri harremanetan bezeroarentzako arreta-zerbitzuan. Informazio eta produktu gehiago ere aurki ditzakezu hemen: Sennheiser denda Amazonen.