TPI H-2308

TPI Corporation 188TASA Fan Forced Portable Heater User Manual

Eredua: H-2308

1. Segurtasun-argibide garrantzitsuak

Read all instructions before using this heater. Failure to follow these instructions may result in fire, electric shock, or injury.

2. Produktua amaitu daview

2.1 Ezaugarriak

2.2 Dimentsio fisikoak

TPI 188TASA portable heater with labeled dimensions: 16 inches high, 10 inches wide, 9.5 inches deep.

Image: The TPI 188TASA heater showing its approximate dimensions for height, width, and depth.

2.3 Kontrolak eta adierazleak

The TPI Corporation 188TASA heater features intuitive controls and indicators for ease of use.

Gertutik view of the TPI 188TASA heater's control panel, showing the power/wattage selector and thermostat dial.

Image: Front panel of the TPI 188TASA heater, displaying the power indicator, caution light, wattage selector (1500W, 1300W, Fan, Off), and thermostat dial (Low to High).

3. Konfigurazioa

  1. Despaketatzea: Kontu handiz atera berogailua bere paketetik. Gorde ontzia etorkizunean biltegiratzeko edo garraiatzeko.
  2. Lekua:
    • Jarri berogailua gainazal sendo eta maila batean.
    • Ensure there is at least 3 feet (0.9 meters) of clear space around the heater from walls, furniture, curtains, and other combustible materials.
    • Do not place the heater in areas where it could be easily tipped over.
    • The heater can be used upright or laid on its side using the integrated side handles as a stand to elevate it slightly from the ground.
  3. Potentzia-konexioa:
    • Ensure the heater's wattage/mode selector is in the "OFF" position.
    • Plug the 6-foot, three-conductor power cord directly into a 120V wall outlet. Do not use extension cords or power strips.
TPI 188TASA portable heater placed on a rug in a room, showing its compact size and power cord.

Image: The TPI 188TASA heater positioned on a floor, demonstrating its typical placement and connection to a power source.

4. Funtzionamendu-argibideak

  1. Piztu: Once plugged in, turn the wattage/mode selector dial to your desired heat setting (1500W or 1300W) or "FAN" for air circulation without heat. The "POWER" indicator light will illuminate.
  2. Tenperatura doitzea: Rotate the thermostat dial to the "HIGH" setting initially. Once the room reaches your desired comfort level, slowly turn the thermostat dial counter-clockwise until the heater turns off. The heater will now cycle on and off to maintain this temperature.
  3. Fan-Only Operation: To use the heater as a fan without heat, select the "FAN" setting on the wattage/mode selector.
  4. Itzali: To turn off the heater, rotate the wattage/mode selector dial to the "OFF" position. Unplug the heater from the wall outlet when not in use for extended periods.

Video: Demonstrates the basic operation of the TPI 188TASA portable heater, including plugging it in and adjusting the controls for heat and fan settings.

5. Mantentzea

Mantentze-lan erregularrak berogailuaren errendimendu optimoa eta iraupen luzea bermatzen ditu.

6. Arazoak

ArazoaKausa posibleaIrtenbidea
Berogailua ez da pizten.
  • Ez dago ondo konektatuta.
  • Etengailua itzalita dago.
  • Termostatoa baxuegia da.
  • Iraultzeko etengailua aktibatuta.
  • Gainberoaren babesa aktibatuta dago.
  • Ensure plug is fully inserted into a 120V outlet.
  • Turn wattage/mode selector to 1500W or 1300W.
  • Biratu termostatoaren botoia ezarpen altuago batera.
  • Jarri berogailua gainazal sendo eta maila batean.
  • Unplug, allow to cool for 30 minutes, then restart. Clear any obstructions.
Berogailuak ez du berorik sortzen berogailu moduan.
  • Termostatoa baxuegia da.
  • Heater is in "FAN" mode.
  • Handitu termostatoaren ezarpena.
  • Select 1500W or 1300W mode.
Caution light is on.
  • Heater has overheated.
  • Airearen sarrera/irteera blokeatuta.
  • Unplug, allow to cool for 30 minutes, then restart.
  • Ensure clear space around the heater.

7. Zehaztapenak

8. Bermea eta Laguntza

For warranty information or technical support, please refer to the documentation included with your product or contact TPI Corporation directly.

TPI Corporation Contact Information:

Please have your model number (H-2308) and purchase date available when contacting support.