D-Link DSL-2740B

D-Link Wireless N300 DSL Modem Router DSL-2740B User Manual

Model: DSL-2740B

Sarrera

This manual provides comprehensive instructions for the installation, configuration, and operation of your D-Link Wireless N300 DSL Modem Router, model DSL-2740B. This device integrates an ADSL2+ modem, a wireless N router, and a 4-port Ethernet switch, offering a complete solution for high-speed internet access and network sharing.

Please read this manual thoroughly before setting up your device to ensure proper functionality and optimal performance.

Konfigurazioa

1. Paketearen edukia

Egiaztatu zure paketeak elementu hauek dituela:

  • D-Link Wireless N300 DSL Modem Router (DSL-2740B)
  • Elikatze-moldagailua
  • Ethernet kablea (RJ-45)
  • Telefono-kablea (RJ-11)
  • ADSL Splitter/Filter (may vary by region)
  • Instalazio azkarraren gida

Elementuren bat falta bada edo hondatuta badago, jarri harremanetan zure tokiko D-Link saltzailearekin.

2. Konexio fisikoa

Follow these steps to connect your modem router:

  1. Itzali: Ensure your computer and any existing modem are powered off.
  2. DSL Line Connection: Connect one end of the phone cable (RJ-11) to the DSL port on the back of the DSL-2740B. Connect the other end to your ADSL wall jack or the 'MODEM' port on an ADSL splitter/filter.
  3. Ethernet konexioa: Connect one end of the Ethernet cable (RJ-45) to any of the LAN ports (1-4) on the back of the DSL-2740B. Connect the other end to the Ethernet port on your computer.
  4. Potentzia-konexioa: Connect the power adapter to the power input on the back of the DSL-2740B and then plug it into a power outlet.
  5. Piztu: Press the power button on the back of the device. The Power LED on the front panel should illuminate.
Aurrealdea view of the D-Link Wireless N300 DSL Modem Router DSL-2740B with LED indicators and two antennas.

1. irudia: Aurrealdea view of the D-Link Wireless N300 DSL Modem Router DSL-2740B. This image displays the front of the D-Link DSL-2740B modem router, highlighting its status LEDs and two external antennas. The LEDs indicate power, DSL connection status, Internet activity, and LAN port activity.

3. Hasierako konfigurazioa (Web Interfazea)

To access the modem router's web-oinarritutako konfigurazio-erabilgarritasuna:

  1. Ireki a web nabigatzailea (adibidez, Chrome, Firefox, Edge).
  2. Helbide-barran, idatzi http://192.168.1.1 eta sakatu Sartu.
  3. A login prompt will appear. Enter the default username and password (usually admin for both, or refer to the label on the device).
  4. Follow the on-screen setup wizard to configure your DSL connection settings (VPI/VCI, encapsulation type, username, password provided by your ISP) and wireless network settings (SSID, security key).

Funtzionamendu-argibideak

1. Gailuak konektatzea

  • Kable bidezko gailuak: Connect Ethernet-enabled devices (e.g., desktop computers, gaming consoles) to any of the four LAN ports on the back of the router using Ethernet cables.
  • Haririk gabeko gailuak:
    1. Bilatu eskuragarri dauden Wi-Fi sareak zure haririk gabeko gailuan (ordenagailu eramangarria, telefono adimenduna, tableta).
    2. Select the SSID (network name) you configured during the initial setup.
    3. Idatzi haririk gabeko pasahitza (segurtasun-giltza) eskatzen zaizunean.
    4. The device should now be connected to your wireless network.

2. Haririk gabeko sarearen konfigurazioa

You can modify your wireless network settings through the web interfazea:

  • SSID (sarearen izena): Change the default network name to a unique identifier.
  • Segurtasun modua: It is recommended to use WPA2-PSK (AES) for the strongest security.
  • Pre-Shared Key (Password): Set a strong, unique password for your wireless network.
  • WPS (Wi-Fi Babestutako Konfigurazioa): Use WPS for easy connection of compatible devices by pressing the WPS button on the router or entering a PIN.

Mantentzea

1. Firmware eguneraketak

Aldian-aldian egiaztatu D-Link euskarria website for firmware updates. Firmware updates can improve performance, add new features, and fix security vulnerabilities. Follow the instructions provided with the firmware update file arretaz.

2. Gailua berrezarri

If you encounter persistent issues or forget your login credentials, you may need to reset the device to factory default settings. Locate the reset button (usually a small pinhole) on the back of the router. With the device powered on, use a paperclip to press and hold the reset button for approximately 10 seconds until the LEDs flash. The device will restart with factory default settings.

3. Garbiketa

Keep the modem router clean and free from dust. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.

Arazoak konpontzea

Ohiko arazoak eta irtenbideak:

  • Potentziarik gabe: Ensure the power adapter is securely connected to the device and a working power outlet. Check the Power LED.
  • No DSL Connection: Verify the phone cable is correctly connected to the DSL port and the wall jack/splitter. Ensure your ISP service is active. The DSL LED should be solid green.
  • Interneterako sarbidea ez: Check if the Internet LED is illuminated. If not, verify your ISP settings (username, password, VPI/VCI) in the web interface. Contact your ISP if the issue persists.
  • Haririk gabeko konexiorik ez: Ensure the Wireless LED is illuminated. Check your device's Wi-Fi settings and ensure you are connecting to the correct SSID with the correct password.
  • Errendimendu motela:
    • Try restarting the modem router by unplugging it for 10 seconds and plugging it back in.
    • Ensure the router is placed in a central location, away from obstructions and interference sources (e.g., microwaves, cordless phones).
    • Egiaztatu firmware eguneratzeak.

LED adierazleak:

LED izenaEgoeraDeskribapena
BotereaBerde SolidoaGailua piztuta dago.
DSLBerde SolidoaDSL connection is established.
DSLBerde keinukariaAttempting to establish DSL connection.
InternetBerde SolidoaInterneteko konexioa aktibo dago.
InternetBerde keinukariaData is being transmitted/received over the Internet.
LAN (1-4)Berde SolidoaA device is connected to the corresponding LAN port.
LAN (1-4)Berde keinukariaData is being transmitted/received over the corresponding LAN port.
WLANBerde SolidoaWireless network is active.
WLANBerde keinukariaData is being transmitted/received over the wireless network.

Zehaztapenak

  • Eredua: DSL-2740B
  • Gailu mota: ADSL2+ Modem, Wireless N Router, 4-Port Switch
  • Haririk gabeko estandarra: 802.11n (backward compatible with 802.11g/b)
  • Haririk gabeko abiadura: Up to 300 Mbps (N300)
  • ADSL Standard: ADSL2+
  • Ethernet portuak: 4 x 10/100 Mbps LAN ports (RJ-45)
  • DSL ataka: 1 x RJ-11
  • Segurtasuna: WPA, WPA2 Wireless Encryption, NAT and SPI Dual Active Firewall
  • Neurriak (LxWxH): 10.9 x 8.3 x 2.7 hazbete inguru
  • Pisua: 1.4 kilo inguru
  • Sistema eragilea: D-Link OS
  • Ezaugarri berezia: WPS

Bermearen informazioa

D-Link products are covered by a limited warranty. The specific terms and duration of the warranty may vary by region and product. Please refer to the warranty card included with your product or visit the official D-Link webwebgunean erosketari aplikatzen zaion bermearen informazio zehatza lortzeko.

Laguntza Teknikoa

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official D-Link support website. Support resources typically include FAQs, troubleshooting guides, and contact information for technical support representatives.

D-Link laguntza Webgunea: www.dlink.com/laguntza

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.