Robertshaw 700-515 Gas Valve Instruction Manual

1. Sarrera

This manual provides essential information for the safe and effective installation, operation, and maintenance of the Robertshaw 700-515 Gas Valve. This device is designed for use in various heating and cooling applications to control gas flow. Please read all instructions carefully before proceeding with installation or operation.

2. Segurtasun informazioa

OHARRA: Instalazio, doikuntza, aldaketa, zerbitzu edo mantentze desegokiak kalteak, lesioak edo heriotza eragin ditzakete. Irakurri arretaz instalazio, funtzionamendu eta mantentze-argibideak ekipo hau instalatu edo zaindu aurretik.

• Instalazioa eta zerbitzua instalatzaile, zerbitzu agentzia edo gas hornitzaile kualifikatu batek egin behar ditu.
• Ensure all gas and electrical connections are made according to local codes and manufacturer specifications.
• Always shut off the main gas supply and electrical power before servicing the unit.
• Check for gas leaks using a soap solution after any gas connection is made. Never use an open flame.
• Ez gorde material sukoiak aparatutik gertu.

3. Produktuaren osagaiak eta gehiagoview

The Robertshaw 700-515 Gas Valve is a compact unit designed for reliable gas flow control. Key components are illustrated and described below.

Figure 1: Robertshaw 700-515 Gas Valve
This image displays the Robertshaw 700-515 gas valve. Visible features include the beige control knob with 'ON', 'OFF', and 'PILOT' settings, electrical terminals labeled 'TH' and 'TP' for thermostat and thermopile connections, and threaded inlet and outlet ports for gas line connections. A vent port is also visible at the top.

• Kontrol Knob: Used to select operating modes: OFF, PILOT, and ON.
• Electrical Terminals (TH, TP): Connection points for the thermostat and thermopile, which control the valve's operation.
• Gas Inlet/Outlet: Threaded ports for connecting the gas supply and the appliance's gas line.
• Aireztapen portua: Allows for proper pressure regulation within the valve.

4. Konfigurazioa eta instalazioa

Installation of the Robertshaw 700-515 Gas Valve should only be performed by a qualified technician. Ensure all local codes and regulations are followed.

1. Gas horniduraren itxiera: Itzali gailuaren gas-hornidura nagusia.
2. Deskonexio elektrikoa: Disconnect all electrical power to the appliance.
3. Kendu balbula zaharra: Carefully disconnect and remove the existing gas valve, if applicable.
4. Muntaketa: Mount the new Robertshaw 700-515 valve in the correct orientation as specified by the appliance manufacturer.
5. Gas konexioak: Apply pipe sealant suitable for gas to the male threads of the gas piping. Connect the gas supply line to the inlet port (National Pipe Tapered) and the appliance gas line to the outlet port (NPT). Tighten connections securely.
6. Konexio elektrikoak: Connect the thermostat wires to the 'TH' terminals and the thermopile wires to the 'TP' terminals as per the appliance wiring diagram.
7. Leak proba: Turn on the main gas supply. Check all gas connections for leaks using a non-corrosive soap solution. Bubbles indicate a leak. Tighten connections or reapply sealant as necessary.
8. Berrezarri boterea: Restore electrical power to the appliance.

5. Funtzionamendu-argibideak

Follow these steps to operate the gas valve and light the pilot (if applicable to your appliance).

1. Turn Control Knob to OFF: Ensure the control knob is in the 'OFF' position and wait at least five minutes to allow any accumulated gas to dissipate.
2. Turn Control Knob to PILOT: Depress the control knob and turn it to the 'PILOT' position.
3. Light Pilot: While holding the knob down, use a match or igniter to light the pilot burner. Continue to hold the knob down for approximately 60 seconds after the pilot lights to allow the thermopile to heat up.
4. Release Knob: Release the control knob. If the pilot flame extinguishes, repeat steps 2 and 3.
5. Turn Control Knob to ON: Once the pilot remains lit, turn the control knob to the 'ON' position. The main burner should now operate under thermostat control.

To shut down the appliance, turn the control knob to the 'OFF' position. For temporary shutdown, turn the thermostat to its lowest setting.

6. Mantentzea

Regular maintenance ensures the longevity and safe operation of your Robertshaw 700-515 Gas Valve. All maintenance should be performed by a qualified service technician.

• Urteko ikuskapena: Have the gas valve and associated appliance inspected annually by a qualified technician.
• Garbitasuna: Ensure the area around the gas valve is kept clean and free from dust, debris, and obstructions.
• Pilotu sugarraren egiaztapena: Periodically observe the pilot flame (if applicable). It should be steady and blue, enveloping the thermopile sensor.
• Ihesen egiaztapenak: Re-check gas connections for leaks periodically, especially if the unit has been moved or serviced.

7. Arazoak

Atal honek aurki ditzakezun arazo ohikoenak jorratzen ditu. Arazo konplexuetarako, jarri harremanetan zerbitzu-teknikari kualifikatu batekin.

8. Zehaztapenak

9. Bermea eta Laguntza

Specific warranty information for the Robertshaw 700-515 Gas Valve is not provided in this document. For warranty details, please refer to the documentation included with your purchase or contact Robertshaw customer support directly. For technical assistance or service, it is recommended to contact a qualified HVAC technician or the manufacturer.

You can visit the official Robertshaw website for further support and product information.