1. Produktua amaitu daview
This manual provides essential information for the safe and effective use of your Ushio BC1618 FCL J120V-500W Halogen Projector Light Bulb. Please read these instructions carefully before installation and operation.
Produktuaren deskribapena
The Ushio BC1618 is a 500-watt, 120-volt halogen incandescent light bulb designed for projector, stage, and studio applications. It features a T2.5 shape with a Recessed Single Contact (R7s) base, providing a clear light output with a color temperature of 3,000K.
Ezaugarri nagusiak
- Wattage: 500W
- liburukiatage: 120V
- Oinarri mota: R7s (Recessed Single Contact)
- Kolore Tenperatura: 3,000K
- Argi-fluxua: 10,000 lumen
- Batez besteko bizitza: 2,000 ordu
- Amaiera: Garbi
Figure 1: Ushio BC1618 FCL J120V-500W Halogen Projector Light Bulb.
2. Segurtasun informazioa
Always observe the following safety precautions to prevent injury or damage to the product and equipment.
- Potentzia deskonexioa: Always disconnect power to the fixture before installing, removing, or handling the bulb.
- Tenperatura altua: Halogen bulbs operate at high temperatures. Allow the bulb to cool completely before touching it.
- Saihestu harreman zuzena: Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves if handling is necessary.
- Egokia den finkapena: Use only in fixtures designed for halogen bulbs of the specified wattage eta liburukiatage.
- Aireztapena: Berotu gehiegizko berotzea saihesteko, ziurtatu aireztapen egokia dagoela instalazioaren inguruan.
- Xedapena: Bonbilla erabiliak tokiko araudien arabera bota.
- Begietako babesa: Wear appropriate eye protection during installation or removal to guard against potential glass breakage.
3. Instalatzeko jarraibideak
Follow these steps to safely install the Ushio BC1618 projector light bulb.
- Ziurtatu korrontea itzalita dagoela: Before beginning, confirm that the power supply to the projector or fixture is completely disconnected.
- Baimendu hoztea: If replacing an old bulb, ensure it has cooled down completely to avoid burns.
- Access Bulb Compartment: Open the bulb access panel on your projector or fixture. Refer to your projector's manual for specific instructions on accessing the bulb.
- Kendu bonbilla zaharra: Carefully grasp the old bulb (using a cloth or gloves if it's a halogen type) and gently pull it straight out from its R7s base. Avoid twisting.
- Bonbilla berria maneiatu: Remove the new Ushio BC1618 bulb from its packaging. Do not touch the glass envelope with bare hands. Use the packaging, a clean cloth, or gloves to handle the bulb.
- Txertatu bonbilla berria: Align the pins of the new bulb with the slots in the R7s base. Gently push the bulb straight into the socket until it is firmly seated. Do not force it.
- Konpartimentu segurua: Close and secure the bulb access panel.
- Berrezarri boterea: Reconnect the power supply to the projector or fixture.
Figure 2: Approximate dimensions of the Ushio BC1618 bulb, showing its length of 4.8 inches (12 cm).
4. Funtzionamendua
Once the Ushio BC1618 bulb is correctly installed, operate your projector or fixture as per its manufacturer's instructions. The bulb will illuminate immediately upon power application.
- Beroketa-denbora: Halogen bulbs provide instant full brightness.
- Hoztu: After use, allow the projector or fixture to cool down for several minutes before moving or storing it. This helps prolong the life of the bulb and other components.
- dimming: If your fixture supports dimming, ensure it is compatible with halogen incandescent bulbs.
5. Mantentzea
Proper maintenance can extend the life of your Ushio BC1618 bulb and ensure optimal performance.
- Garbiketa: If the bulb's glass envelope becomes dirty, gently wipe it with a clean, lint-free cloth moistened with isopropyl alcohol. Ensure the bulb is completely cool and power is disconnected before cleaning.
- Ikuskapena: Periodically inspect the bulb and its socket for any signs of damage, corrosion, or loose connections.
- Biltegiratzea: Gorde ordezko bonbillak jatorrizko ontzian, leku fresko eta lehor batean, kalteetatik babesteko.
6. Arazoak
If you encounter issues with your Ushio BC1618 bulb, refer to the following common problems and solutions.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Bonbilla ez da pizten. | No power to fixture; Bulb not seated correctly; Bulb has reached end of life; Faulty fixture. | Check power connection and circuit breaker. Ensure bulb is fully inserted. Replace bulb if it has exceeded its average lifetime. Consult a qualified technician for fixture repair. |
| Bonbillak dir-dir egiten du. | Loose connection; Incompatible dimmer; Voltaggorabeherak. | Ensure bulb is securely seated. Verify dimmer compatibility. Check power supply for stability. |
| Bonbila azkar erretzen da. | Bolumen gehiegitage; Frequent switching; Excessive vibration; Touching glass with bare hands during installation. | Egiaztatu liburu zuzenatage supply. Reduce frequency of on/off cycles. Ensure fixture is stable. Reinstall bulb carefully, avoiding skin contact with glass. |
7. Zehaztapen Teknikoak
| Marka | Ushio |
| Modelo zenbakia | BC1618 (1000488) |
| Argi Mota | Halogen Incandescent |
| Wattage | 500 Watt |
| liburukiatage | 120 Volt |
| Bonbilla Forma Tamaina | T2.5 (119MM length) |
| Oinarri Mota | R7s (Recessed Single Contact) |
| Kolore Tenperatura | 3000 Kelvin |
| Distira | 10000 lumen |
| Batez besteko Bizitza | 2000 ordu |
| Amaitu | Garbi |
| Materiala | Kobrea |
| Produktuaren neurriak | 5.5 x 1 x 1 hazbete (gutxi gorabehera 13.97 x 2.54 x 2.54 cm) |
| Elementuaren pisua | 0.48 ontza (13.6 gramo inguru) |
| Erabilera espezifikoak | Projector, Stage, Studio |
| UPC | 048777131718 |
8. Bermea eta Laguntza
Bermearen informazioa
The manufacturer states that a specific warranty description is Ez dago aplikagarri for this product. Please refer to the retailer's return policy for any issues.
Bezeroarentzako Arreta
For further assistance or inquiries regarding the Ushio BC1618 projector light bulb, please contact your point of purchase or refer to the manufacturer's official weblaguntza baliabideen gunea.