Vivitar VIV548008DCKPANDMCG2 Flash Instruction Manual

1. Produktua amaitu daview

The Vivitar VIV548008DCKPANDMCG2 is a dedicated shoe-mount flash unit designed for use with Panasonic Lumix DMC-G2 cameras. It offers advanced lighting control with TTL autoflash and manual flash modes, featuring a zoom head, vertical bounce, and horizontal swivel capabilities. This flash is equipped with an autofocus auxiliary lamp to assist in low-light conditions and supports wireless flash functions as both master and slave.

1.1. irudia: Aurrealdea view of the Vivitar VIV548008DCKPANDMCG2 flash unit with the diffuser in an upward-tilted position. This image illustrates the flash head's bounce capability.

1.2. irudia: Angelua view of the Vivitar VIV548008DCKPANDMCG2 flash unit, highlighting the LCD display and control buttons. The display shows current flash settings, including manual power and zoom level.

2. Segurtasun informazioa

• Ez desmuntatu edo konpontzen saiatu flash unitatea zeuk. Jarri harremanetan zerbitzu-langile kualifikatuekin.
• Mantendu flasha lehor. Ez jarri euripean, hezetasunean edo hezetasun handiaren eraginpean.
• Avoid direct eye exposure to the flash light, especially at close range, as it can impair vision.
• Use only specified batteries (2x 1.5V "AA" alkaline, lithium, NiCad & NiMH). Incorrect battery types may cause leakage or explosion.
• Mantendu haurren eskura.
• Ez erabili flasha gas edo likido sukoien aurrean.

3. Paketearen edukia

Egiaztatu elementu guztiak zure paketean daudela:

• Vivitar VIV548008DCKPANDMCG2 Flash Unit
• Flash Pouch
• Flash difusorea
• Flash Reflecting Plate
• AC Rapid Battery Charger
• 4 x 2900mAh AA Batteries
• 5 Piece Cleaning Kit

4. Konfigurazioa

4.1 Bateriak instalatzea

1. Ireki flash unitatearen atzealdean dagoen bateriaren konpartimentuaren estalkia.
2. Insert two 1.5V "AA" batteries (alkaline, lithium, NiCad, or NiMH) according to the polarity indicators inside the compartment.
3. Itxi bateriaren konpartimenduaren estalkia ondo.

Oharra: Ensure batteries are fully charged before use. Use the provided AC Rapid Battery Charger for the included rechargeable batteries.

4.2 Kamerari eranstea

1. Ziurtatu kamera eta flash unitatea itzalita daudela.
2. Slide the flash unit's mounting foot into the camera's hot shoe.
3. Tighten the locking ring or lever on the flash unit's foot to secure it firmly to the camera.

5. Funtzionamendu-argibideak

5.1 Piztu/Itzaltzea

• Pizteko, sakatu eta eutsi pizteko botoia (⑂) until the LCD screen illuminates.
• To power off, press and hold the power button again until the LCD screen turns off.

5.2 Basic Flash Modes

Sakatu MODUA botoia eskuragarri dauden flash moduen artean txandakatzeko:

• TTL (Lentearen Bidez) Autoflash: The flash output is automatically controlled by the camera's metering system for optimal exposure.
• Eskuzko flasha (M): You manually set the flash output power (e.g., 1/1, 1/2, 1/4, etc.). Use the dial/buttons to adjust power.

5.3 Zoom Head Adjustment

The flash features a zoom head (24-85mm) that can be adjusted to match the focal length of your lens. Press the ZOOM button and use the dial/buttons to set the desired zoom position. In TTL mode, the flash may automatically adjust the zoom based on the camera's lens information.

5.4 Bounce and Swivel

The flash head can be tilted vertically up to 90° and swiveled horizontally up to 270° to bounce light off ceilings or walls for softer, more natural illumination. Gently adjust the flash head to the desired angle.

5.5 Wireless Flash Function

This flash supports wireless operation as a master or slave unit. Press the SLAVE GR/CH button to enter wireless mode and select the desired group (A, B, C) and channel. Refer to your camera's manual for specific wireless flash settings.

• Master modua: Controls other slave flash units.
• Esklabo modua: Triggered by a master flash unit or the camera's built-in flash.

6. Mantentzea

• Garbiketa: Use a soft, dry cloth to clean the flash unit. For stubborn dirt, slightly dampen the cloth with water. Do not use organic solvents. Use the provided cleaning kit for optical surfaces.
• Biltegiratzea: When not in use for extended periods, remove the batteries to prevent leakage. Store the flash in a cool, dry place, preferably in its pouch.
• Bateria zaintzea: Rechargeable batteries should be fully charged before storage and periodically recharged if stored for a long time.

7. Arazoak

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Vivitar webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.

• Lineako laguntza: www.vivitar.com/support (Exampesteka, benetako esteka alda daiteke)
• Bezeroarentzako arreta: Kontaktu-datuak zure produktuaren ontzian daude.