EnGenius EAP350 N300 High-Power Wireless Gigabit Indoor Access Point User Manual

Sarrera

This manual provides detailed instructions for the installation, configuration, and operation of the EnGenius EAP350 N300 High-Power Wireless Gigabit Indoor Access Point. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.

1. Produktua amaitu daview

The EnGenius EAP350 is a high-power wireless N access point designed for robust indoor wireless connectivity. It supports multiple operating modes including Access Point, WDS, and Repeater, offering flexibility for various network deployments. With its Gigabit Ethernet port and 802.11n standard, it delivers high-speed wireless performance.

Ezaugarri nagusiak:

• High-power, Long-range Wi-Fi for extended coverage.
• Up to 29dBm RF Tx power for enhanced signal strength.
• Wireless N (802.11n) standard delivers up to 300Mbps throughput.
• Gigabit Ethernet LAN interface for fast wired data transfer.
• Supports 802.1q mapping of SSIDs and up to four VLANs.
• Power-over-Ethernet (IEEE 802.3af) support for flexible deployment.
• Internal 5dBi antenna with optimized configuration.

Itxura fisikoa:

Figure 1: EnGenius EAP350 N300 Access Point. This image displays the top-down view of the white, circular access point with the EnGenius logo and model number EAP350 visible. LED indicators for wireless, LAN, and power are also present.

2. Paketearen edukia

Egiaztatu zure paketeak elementu hauek dituela:

• EnGenius EAP350 High-power Wireless N Access Point
• Energia egokitzailea (PoE erabiltzen ez baduzu)
• Ethernet kablea
• Muntatzeko kita (torlojuak, aingurak)
• Instalazio azkarraren gida

3. Konfigurazioa eta instalazioa

3.1 Gailua muntatzea

The EAP350 can be mounted on a ceiling or wall. Choose a central location for optimal wireless coverage. Use the provided mounting kit to secure the device.

1. Hautatu muntatzeko toki egokia.
2. Erabili muntatzeko euskarria txantiloi gisa zuloak markatzeko.
3. Beharrezkoa bada, zuloak egin eta hormako aingurak sartu.
4. Finkatu muntatzeko euskarria gainazalera.
5. Attach the EAP350 to the mounting bracket by twisting it into place.

3.2 Gailua piztea

The EAP350 supports Power-over-Ethernet (PoE) IEEE 802.3af or can be powered by a standard power adapter.

• PoE konexioa: Connect an Ethernet cable from a PoE-enabled switch or a PoE injector (e.g., EnGenius EPE5818Gaf) to the LAN port of the EAP350.
• Elikatze-egokigailuaren konexioa: If PoE is not available, connect the provided power adapter to the power input port on the EAP350 and plug it into a power outlet.

3.3 Hasierako sare konexioa

Connect the EAP350 to your network using an Ethernet cable from its LAN port to your router or switch. Ensure the device powers on and the LED indicators illuminate correctly.

4. Funtzionamendu moduak

The EAP350 can operate in several modes to suit different network requirements:

• Sarbide puntua (AP) modua: The default mode, where the device acts as a central hub for wireless clients to connect to your wired network.
• WDS (Wireless Distribution System) Mode: Allows the EAP350 to wirelessly connect to other access points to extend the network without physical cabling. Can be configured as WDS AP, WDS Bridge, or WDS Station.
• Errepikagailu modua: Extends the range of an existing wireless network by re-transmitting the signal from another access point.

5. Konfigurazioa

5.1 Sartzea Web Interfazea

To configure the EAP350, access its webOinarritutako kudeaketa interfazea:

1. Ensure your computer is connected to the same network as the EAP350.
2. Ireki a web browser and enter the default IP address (refer to the Quick Installation Guide or device label for the default IP, typically 192.168.1.1 or similar).
3. Sartu erabiltzaile-izena eta pasahitza lehenetsiak (adibidez, admin/admin).

5.2 Oinarrizko haririk gabeko ezarpenak

Navigate to the Wireless settings section to configure your Wi-Fi network:

• SSID: Set your desired network name.
• Segurtasun modua: Segurtasun optimoa lortzeko, hautatu WPA2-PSK (AES).
• Aurrez partekatutako gakoa: Enter a strong password for your wireless network.
• Eragiketa modua: Select the desired mode (Access Point, WDS, Repeater).

5.3 Ezarpen aurreratuak

The EAP350 offers advanced features such as VLAN tagging and Quality of Service (QoS) for network management. Refer to the full user manual for detailed instructions on these configurations.

5.4 Konfigurazioa gordetzea

After making any changes, ensure you save the configuration to the device's memory. Typically, there is a "Save" or "Apply" button within the web interface. Some devices may require a separate step to save the running configuration to the startup configuration.

6. Mantentzea

6.1 Firmware eguneraketak

Aldian-aldian egiaztatu EnGenius website for firmware updates. Updating the firmware can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update package carefully.

6.2 Fabrika lehenetsitako ezarpenetara berrezartzea

If you encounter persistent issues or forget your login credentials, you can reset the device to its factory default settings. Locate the reset button (often a small pinhole) on the device. With the device powered on, press and hold the reset button for approximately 10-15 seconds until the LEDs indicate a reset.

6.3 Garbiketa

Clean the device periodically with a soft, dry cloth. Do not use liquid cleaners or aerosols, as they may damage the device.

7. Arazoak

Atal honek zure EAP350arekin aurki ditzakezun arazo ohikoenak jorratzen ditu.

• Potentziarik gabe:
  • Ensure the power adapter is securely connected to both the device and a working power outlet, or that the PoE source is active and connected to the LAN port.
  • Check the power LED indicator.
• Ezin da Wi-Fira konektatu:
  • Verify the SSID and password are correct.
  • Check if the wireless function is enabled in the web interfazea.
  • Ensure your client device is within range.
• Haririk gabeko abiadura motela:
  • Egiaztatu beste haririk gabeko gailu edo sare batzuen interferentziak.
  • Ensure the EAP350 is placed in an optimal location, away from obstructions.
  • Verify the wired connection speed to your router/switch.
  • Eguneratu firmwarea azken bertsiora.
• Ezin da sartu Web Interfazea:
  • Ensure your computer's IP address is in the same subnet as the EAP350.
  • Saiatu zure arakatzailearen cachea garbitzen edo beste arakatzaile bat erabiltzen.
  • If the IP address has been changed and forgotten, a factory reset may be necessary.

8. Zehaztapenak

9. Bermearen informazioa

EnGenius products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EnGenius webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.

10. Laguntza Teknikoa

If you require further assistance or encounter issues not covered in this manual, please contact EnGenius Technical Support. You can find contact information and additional resources, including FAQs and driver downloads, on the official EnGenius webgunea:

Webgunea: www.engeniustech.com/support

Please have your product model number (EAP350) and serial number ready when contacting support.