SHIMANO FLIGHT DECK SC-6500-M Cycle Computer Bracket Sensor Kit

1. Sarrera

The SHIMANO FLIGHT DECK SC-6500-M Cycle Computer Bracket Sensor Kit is an essential component for your SHIMANO FLIGHT DECK cycle computer system. This kit provides the necessary bracket for mounting your computer and a speed sensor to accurately measure your cycling data. It is designed for seamless integration with compatible SHIMANO FLIGHT DECK cycle computers, including models like SC-6500-M, SC-6500-T, and SC-6500-RX, and is compatible with XTR, XT, and LX series components.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your bracket and sensor kit to ensure optimal performance and longevity.

2. Zer dago kutxan

Upon opening your SHIMANO FLIGHT DECK SC-6500-M kit, please verify that all the following components are present:

• FLIGHT DECK Cycle Computer Bracket
• Speed Sensor Unit
• Ertz-imana
• Mounting Hardware (screws, cable ties)
• Argibide eskuliburua (dokumentu hau)

Image: The complete SHIMANO FLIGHT DECK SC-6500-M kit, showing all included components laid out.

3. Konfigurazioa eta instalazioa

Proper installation is crucial for accurate data collection. Follow these steps carefully:

3.1 Beharrezko tresnak

• Hex Key Set (e.g., 2mm, 3mm, 4mm, 5mm depending on your bike's components)
• Wire Cutters (for cable ties)

3.2 Soken instalazioa

1. Identify a suitable mounting location on your handlebar or stem. Ensure it does not obstruct your view edo bizikletaren kontrola.
2. Secure the bracket base to the chosen location using the provided screws. Tighten securely but do not overtighten.
3. Attach the computer mounting head to the bracket base if it's a two-piece design.

3.3 Sensor and Magnet Installation

1. Mount the speed sensor to the front fork or rear chainstay, ensuring it is positioned to align with the spoke magnet. Use the provided cable ties or mounting bands to secure it firmly.
2. Attach the spoke magnet to a spoke on your wheel. Position it so that it passes directly in front of the sensor's detection area with each wheel rotation.
3. Adjust the sensor and magnet positions so that the gap between them is approximately 1-3mm when the magnet passes the sensor. This gap is critical for accurate readings.

3.4 Cable Routing and Connection

1. Carefully route the sensor cable along your bicycle frame towards the computer bracket. Use cable ties to secure the cable neatly and prevent it from interfering with moving parts or snagging.
2. Connect the sensor cable to the designated port on your FLIGHT DECK cycle computer or the bracket if it has an integrated connection point. Ensure the connection is secure.

4. Funtzionamendu-argibideak

The SHIMANO FLIGHT DECK SC-6500-M Bracket Sensor Kit is a passive component that facilitates the operation of your cycle computer. Its primary function is to provide accurate speed and distance data to the connected FLIGHT DECK computer.

4.1 Ensuring Proper Function

• Sentsorearen lerrokatzea: Regularly check that the speed sensor and spoke magnet remain properly aligned with the recommended 1-3mm gap. Misalignment can lead to inaccurate or intermittent readings.
• Konexio seguruak: Ensure all cable connections are firm and free from damage. Loose connections can disrupt data transmission.
• Ordenagailuaren potentzia: Confirm your FLIGHT DECK cycle computer is powered on and correctly configured to receive data from the sensor. Refer to your specific cycle computer's manual for detailed operating instructions.

Once installed and connected, the sensor will automatically transmit speed data to your cycle computer as the wheel rotates and the magnet passes the sensor.

5. Mantentzea

Regular maintenance will extend the life and ensure the reliability of your SHIMANO FLIGHT DECK SC-6500-M kit.

• Garbiketa: Periodically wipe down the sensor, magnet, and bracket with a damp oihala zikinkeria eta zikinkeria kentzeko. Saihestu produktu kimiko gogorrak edo material urratzaileak erabiltzea.
• Kableen ikuskapena: Check the sensor cable for any signs of wear, fraying, or kinks. Ensure it is securely fastened along the frame and not rubbing against any moving parts.
• Estutasun-egiaztapena: Routinely inspect all mounting screws and cable ties to ensure they remain tight and secure. Vibrations from riding can sometimes loosen components.
• Sensor/Magnet Alignment: Verify the sensor and magnet maintain their optimal alignment and gap. Adjust if necessary.

6. Arazoak

If you experience issues with your SHIMANO FLIGHT DECK SC-6500-M kit, refer to the following common problems and solutions:

7. Zehaztapenak

8. Bermea eta Laguntza

Specific warranty details for the SHIMANO FLIGHT DECK SC-6500-M Cycle Computer Bracket Sensor Kit are typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for warranty claims.

For technical support, spare parts, or warranty inquiries, please contact your authorized SHIMANO dealer or visit the official SHIMANO website for customer service contact information in your region. When contacting support, please have your product model number (SC-6500-M) and purchase details ready.