HP Wireless Mouse X4000 with Laser Sensor Instruction Manual

1. Produktua amaitu daview

The HP Wireless Mouse X4000 with Laser Sensor is designed for comfort and efficiency. It features advanced wireless connectivity, extended battery life, and a high-precision laser sensor for smooth navigation across various surfaces. This manual will guide you through the setup and usage of your new mouse.

1. irudia: HP Wireless Mouse X4000 and its USB receiver. The mouse features a sleek black design with a scroll wheel and two main buttons. The small USB receiver is shown next to it, ready for connection.

Ezaugarri nagusiak:

• Haririk gabeko konektagarritasuna: 2.4GHz wireless technology provides a 30ft (10m) roaming range.
• Bateriaren iraupen hedatua: Up to 30 months of battery life on two AA batteries.
• Zehaztasun handiko laser sentsorea: 1600 dpi laser sensor for accurate tracking on almost any surface.
• HP Link-5 Technology: Connect up to five compatible HP accessories with a single nano receiver.
• Diseinu ergonomikoa: Sculpted shape with smooth edges and sweeping contours for comfortable use.
• LED adierazlea: Light to verify connection and alert when battery runs low.

2. Konfigurazio gida

2.1. Pilak instalatzea

1. Kokatu bateriaren konpartimendua saguaren azpialdean.
2. Gently push the battery compartment cover inwards and slide it off to reveal the battery slot.
3. Insert two AA batteries, ensuring correct polarity (+ and - ends match the indicators inside the compartment).
4. Replace the battery compartment cover by aligning it and sliding it back until it clicks into place.

2.2. USB hargailua konektatzea

1. Locate the USB nano receiver, typically stored inside the mouse's battery compartment or packaged separately.
2. Konektatu USB hargailua zure ordenagailuko (ordenagailu eramangarria edo mahaigainekoa) USB ataka libre batean.
3. Zure ordenagailuak automatikoki detektatu eta instalatu beharko lituzke beharrezko kontrolatzaileak. Honek minutu batzuk iraun ditzake.

2.3. Sagua piztu

1. On the underside of the mouse, locate the On/Off switch.
2. Slide the switch to the "On" position. An LED indicator light on the mouse may illuminate briefly to confirm it is powered on.

2.4. Parekatzea (beharrezkoa bada)

In most cases, the mouse will automatically pair with the USB receiver. If it does not, or if you are using HP Link-5 technology to connect multiple devices:

1. Ensure the mouse is powered on and the USB receiver is plugged into your computer.
2. On the underside of the mouse, press the "Connect" button (often a small blue button).
3. Follow any on-screen prompts on your computer to complete the pairing process. For Windows, you might need to go to "Bluetooth & devices" settings and select "Add device" if the mouse isn't automatically recognized.

3. Funtzionamendu-argibideak

3.1. Saguaren oinarrizko funtzioak

• Ezkerreko botoiarekin klik egin: Press the left button to select items, open files, edo funtzioak aktibatu.
• Eskuineko botoiarekin klik egin: Press the right button to open context menus with additional options.
• Korritzeko gurpila: Roll the wheel up or down to scroll through documents or web pages. The scroll wheel can also be pressed as a middle-click button for certain functions.
• Mugimendua: Mugitu sagua gainazal lau batean zehar pantailako kurtsorea kontrolatzeko. Laser sentsoreak jarraipen zehatza eskaintzen du.

3.2. HP Link-5 Technology

The HP Wireless Mouse X4000 utilizes HP Link-5 technology, allowing you to connect up to five compatible HP wireless devices (such as keyboards or other mice) to a single nano USB receiver. This helps conserve USB ports on your computer.

• To add another Link-5 compatible device, ensure the device is in pairing mode and follow its specific instructions for connecting to an existing Link-5 receiver.

4. Mantentzea

4.1. Bateria ordezkatzea

The HP Wireless Mouse X4000 boasts an impressive battery life of up to 30 months. When the LED indicator light on the mouse begins to flash or the mouse performance degrades, it's time to replace the batteries.

1. Itzali sagua azpialdean dagoen pizteko/itzaltzeko etengailua erabiliz.
2. Kendu bateriaren konpartimentuaren estalkia.
3. Remove the old AA batteries and dispose of them responsibly according to local regulations.
4. Sartu bi AA pila berri, polaritate zuzena errespetatuz.
5. Replace the battery compartment cover and turn the mouse back on.

4.2. Garbiketa

To maintain optimal performance and appearance, regularly clean your mouse.

• Erabili lipurrik gabeko zapi leun bat dampurarekin edo garbiketa-soluzio leun batekin jarri.
• Wipe the exterior of the mouse, paying attention to the glossy surfaces which may show smudges.
• Saihestu hezetasuna irekidura edo zirrikituetan sartzea.
• Ez erabili produktu kimiko gogorrik edo garbigailu urratzailea.

5. Arazoak

5.1. Saguak ez du erantzuten

• Egiaztatu potentzia: Ensure the mouse is turned "On" and the batteries are correctly installed and charged. Replace batteries if necessary.
• Egiaztatu USB hargailua: Ziurtatu USB hargailua ondo konektatuta dagoela ordenagailuko USB ataka funtzional batean. Saiatu beste USB ataka batekin.
• Re-pair Mouse: If the connection is lost, try re-pairing the mouse with the receiver as described in Section 2.4.
• Interferentzia: Move the mouse closer to the USB receiver. Avoid using the mouse near other wireless devices that might cause interference.

5.2. Kurtsorearen mugimendu irregularra

• Azalera: Ensure you are using the mouse on a clean, non-reflective, and uniform surface. Highly reflective or uneven surfaces can affect laser tracking.
• Garbitu sentsorea: Gently clean the laser sensor on the underside of the mouse with a soft, dry cloth.

6. Zehaztapenak

7. Bermea eta Laguntza

Bermeari buruzko informazioa eta laguntza teknikoa lortzeko, kontsultatu zure produktuarekin batera datorren dokumentazioa edo bisitatu HPren laguntza ofiziala. webgunea. Berme-baldintza espezifikoak eskualdearen eta erosketa-dataren arabera alda daitezke.

Lineako laguntza: www.hp.com/support