Sarrera
This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject Audio Phono Box DC. This compact phono preamplifier is designed to enhance the audio signal from your turntable, making it compatible with line-level inputs on your amplifier or receiver. It supports both Moving Magnet (MM) and Moving Coil (MC) cartridges, offering versatility for various turntable setups.
1. irudia: Aurrealdea view of the Pro-Ject Audio Phono Box DC in black.
Segurtasun Informazioa
- Always disconnect the power adapter before cleaning or if the unit will not be used for an extended period.
- Do not expose the unit to rain or moisture. Avoid placing objects filled with liquid, such as vases, on the unit.
- Ziurtatu aireztapen egokia dagoela. Ez blokeatu aireztapen-irekidurak.
- Place the unit on a stable, level surface to prevent accidental falls.
- Saihestu unitatea bero-iturrien ondoan jartzea, hala nola erradiadoreen, bero-erregistroen, sukaldeen edo beste aparatu batzuen ondoan (adibidez, bero-iturriak). ampberoa sortzen duten argitzaileak).
- Use only the power supply provided by the manufacturer.
- Ez saiatu unitatea zeuk konpontzen. Konponketa guztiak zerbitzu-langile kualifikatuei eskatu.
Paketearen edukia
Mesedez, egiaztatu zure paketeak elementu hauek dituela:
- Pro-Ject Audio Phono Box DC unit
- DC power adapter (18V)
- Argibide eskuliburua
Elementuren bat falta bada edo hondatuta badago, jarri harremanetan zure dendariarengana berehala.
Konfigurazioa
Follow these steps to correctly set up your Phono Box DC:
- Lekua: Position the Phono Box DC near your turntable and amplifier. Its compact size allows for flexible placement.
- Cartridge Type Selection: Locate the MM/MC switch on the rear panel of the Phono Box DC. Set it according to your turntable's cartridge type (Moving Magnet or Moving Coil). Ensure this is set correctly for optimal sound quality.
- Connect Turntable to Input: Connect the RCA output cables from your turntable to the "In" (Left and Right) RCA inputs on the rear of the Phono Box DC.
- Konektatu lurreko kablea: Connect the ground wire from your turntable to the ground terminal on the Phono Box DC. This is crucial for minimizing hum and noise.
- Connect Output to Ampbiziagoa: Connect the "Out" (Left and Right) RCA outputs from the Phono Box DC to a line-level input on your amplifier or receiver (e.g., "Aux", "CD", "Line In"). Do NOT connect it to an amplifier's dedicated "Phono" input, as this would result in over-amplification and distortion.
- Konektatu energia: Connect the supplied 18V DC power adapter to the "Power 18V===" input on the rear of the Phono Box DC, then plug the adapter into a suitable power outlet.
2. Irudia: Atzealdea view showing input, output, MM/MC switch, ground terminal, and power input.
Funtzionamendua
Once all connections are made and the power is supplied, the Phono Box DC is ready for operation. There are no additional controls on the unit beyond the MM/MC switch. Simply select the correct cartridge type, and the unit will automatically process the audio signal from your turntable.
- Ziurtatu zure amplifier is set to the correct input channel where the Phono Box DC is connected.
- Doitu bolumena zure laguntzarekin ampbizigarriaren kontrolak.
Mantentzea
The Pro-Ject Audio Phono Box DC requires minimal maintenance:
- Garbiketa: Erabili zapi leun eta lehor bat unitatearen kanpoaldea garbitzeko. Ez erabili garbitzaile likidorik edo disolbatzailerik.
- Hautsa: Keep the unit free from dust accumulation, which can affect performance and lifespan.
- Konexioak: Aldian-aldian egiaztatu kable-konexio guztiak ondo finkatuta daudela eta korrosiorik gabe daudela ziurtatzeko.
Arazoak konpontzea
If you encounter issues with your Phono Box DC, refer to the following common problems and solutions:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Soinurik ez edo bolumen oso baxua | Incorrect connections, MM/MC switch setting, power issue, ampsarrera biziagoa. |
|
| Soinu distortsionatua edo lausoa | Incorrect MM/MC switch setting, faulty cables, damaged cartridge. |
|
| Burrunba edo burrunba zarata | Improper grounding, interference, faulty cables. |
|
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Marka | Proiektua |
| Modelo zenbakia | 13072 |
| Produktuaren neurriak (L x W x H) | 2.95 x 4.21 x 2.83 hazbete |
| Elementuaren pisua | 1.19 kilo |
| Materiala | Metala |
| liburukiatage | 120V |
| Gehienezko hornidura boltage | 9.5 Volt |
| Gutxieneko Hornidura Voltage | 9.5 voltio (AC) |
| Kanal kopurua | 1 |
| Zehaztapena Met | RIAA Response Accuracy 0.5dB (20-20,000 Hz), THD 0.01% (MM), THD 0.05% (MC) |
Bermearen informazioa
Pro-Ject Audio Systems products are covered by a manufacturer's warranty. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For detailed warranty information, it is recommended to visit the official Pro-Ject Audio Systems webgunea edo jarri harremanetan zure baimendutako saltzailearekin.
Laguntza
Should you require further assistance or have questions not covered in this manual, please contact:
- Your authorized Pro-Ject Audio Systems retailer.
- Pro-Ject Audio Systems customer support via their official webgunea: www.project-audio.com
Laguntzarekin harremanetan jartzean, izan zure produktuaren modelo zenbakia (13072) eta erosketaren xehetasunak prest.