Horizon Digital Hanging Scale

Sarrera

This manual provides essential instructions for the safe and effective operation, setup, and maintenance of your Horizon SF-918 OCS-L Digital Hanging Scale. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury.

Image: The Horizon SF-918 OCS-L Digital Hanging Scale, showcasing its robust design with a top shackle and a lower weighing hook.

Segurtasun Informazioa

• Do not exceed the maximum weight capacity of 300 kg (600 lbs). Overloading can damage the scale and pose a safety risk.
• Ensure the scale is securely suspended from a stable and appropriate support structure before attaching any load.
• Always stand clear of the load during weighing.
• Avoid dropping or subjecting the scale to severe impacts.
• Do not immerse the scale in water or expose it to excessive moisture. While durable, it is not waterproof.
• Mantendu haurren eskura.

Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• Horizon SF-918 OCS-L Digital Hanging Scale
• Top Shackle (pre-attached)
• Bottom Weighing Hook
• 2 x AAA bateria

Image: The Horizon SF-918 OCS-L Digital Hanging Scale as packaged, showing the scale, hooks, and included AAA batteries.

Konfigurazioa

1. Bateriaren instalazioa:
   • Kokatu bateriaren konpartimendua baskularen atzealdean.
   • Ireki bateriaren estalkia.
   • Sartu bi (2) AAA pila, polaritate zuzena (+/-) ziurtatuz.
   • Close the battery cover securely. Ensure the batteries are firmly seated to prevent intermittent power loss during use.
   

   Irudia: Xehetasun zehatza view of the battery compartment, showing the correct placement of two AAA batteries.

2. Attaching the Bottom Hook:
   • The top shackle is typically pre-attached.
   • Attach the provided bottom weighing hook to the lower attachment point of the scale. Ensure it is securely fastened.
   

   Image: A close-up of the robust top shackle, indicating the secure attachment mechanism for suspending the scale.

Funtzionamendu-argibideak

The scale features a 1-inch illuminated LCD display and three control buttons: Power, HOLD/UNIT, and TARE.

Irudia: Xehetasun zehatza view of the scale's digital display and control buttons, showing the current weight reading and unit.

1. Piztu/Itzali:
   • Sakatu Boterea botoia () to turn the scale ON. The display will show "88888" then "0.0" with the current unit.
   • Eduki sakatuta Boterea button for 3 seconds to turn the scale OFF.
2. Unit Selection (Kg/Lb/N):
   • With the scale ON and displaying "0.0", press the HOLD/UNIT button to cycle through the available weighing units: Kilograms (kg), Pounds (lb), and Newtons (N).
3. Tara funtzioa:
   • To weigh items in a container, first hang the empty container on the hook.
   • Sakatu Tare botoia. Pantaila "0.0"-ra berrezarriko da.
   • Gehitu pisatu beharreko elementuak ontzira. Pantailak elementuen pisu garbia erakutsiko du.
4. Eutsi funtzioa:
   • While weighing a load, press the HOLD/UNIT button to lock the current weight reading on the display. The "HOLD" indicator will appear.
   • Sakatu HOLD/UNIT button again to release the hold function and return to live weighing.
   • Note: This function holds the weight displayed at the moment the button is pressed, not necessarily the maximum weight achieved during the lift.
5. Pisatzeko prozedura:
   • Ensure the scale is ON and displaying "0.0" in your desired unit.
   • Carefully attach the item to be weighed to the bottom hook.
   • Allow the load to stabilize. The display will show the weight. The reading stable time is typically less than 10 seconds.
   • Remove the load once the reading is taken.
6. Itzali automatikoa:
   • The scale will automatically turn off after approximately 3 minutes of inactivity to conserve battery life. This feature cannot be adjusted or disabled.

Mantentzea

• Garbiketa: Garbitu eskala leun batekin, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components. Avoid getting water inside the unit.
• Biltegiratzea: Store the scale in a dry, cool place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
• Bateria ordezkatzea: When the battery indicator appears on the display, replace both AAA batteries promptly to ensure accurate readings and proper operation.

Arazoak konpontzea

Balantza ez da pizten:

Check battery installation. Ensure batteries are inserted with correct polarity and are fully charged. Replace batteries if necessary. Ensure battery contacts are clean and free from corrosion.

Irakurketa zehaztugabeak:

Ensure the scale is suspended stably and not swinging. Verify the load is not touching any other surfaces. Check if the scale has been overloaded. Perform a tare operation before weighing.

Scale turns off unexpectedly:

This may be due to the 3-minute auto-off feature if no activity is detected. If it turns off during active weighing, check battery contact and ensure batteries are securely seated and not loose.

Display shows "O-Ld" or similar:

This indicates an overload condition. Remove the load immediately to prevent damage to the scale. Do not exceed the 300 kg / 600 lbs capacity.

Zehaztapenak

Bermea eta Laguntza

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Horizon webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa.