Hitron HB-2 Digital Bass Reconstruction Processor

Sarrera

The Hitron HB-2 is a state-of-the-art digital bass reconstruction processor designed to enhance the low-frequency response of your car audio system. It restores and enhances bass frequencies that are often lost during the recording or compression process, providing a richer and more dynamic audio experience. This unit features a convenient dash-mount remote control for on-the-fly adjustments.

Segurtasun Informazioa

• Deskonektatu beti ibilgailuaren bateria edozein instalazio hasi aurretik.
• Professional installation is highly recommended to ensure proper wiring and functionality.
• Ez jarri unitatea hezetasunean edo muturreko tenperaturetan.
• Ziurtatu kableatu guztiak ondo isolatuta eta ondo finkatuta daudela zirkuitulaburrak saihesteko.
• Mount the unit in a location that does not obstruct the driver's view edo ibilgailuen funtzionamendua oztopatzea.

Paketearen edukia

Mesedez, egiaztatu paketea elementu hauek dituen:

• Hitron HB-2 Digital Bass Reconstruction Processor Unit
• Dash-Mount Remote Control
• Urruneko Kontrol-Kablea
• Power and Signal Wiring Harness

Konfigurazioa eta Instalazioa

Mounting the HB-2 Unit

Choose a secure, dry location for mounting the HB-2 unit, such as under a seat or behind the dashboard. Ensure adequate ventilation around the unit. Use screws to firmly attach the unit to a flat surface.

Irudia: The main Hitron HB-2 unit, showing input/output connections and control knobs.

Kableatu konexioak

1. Potentzia-konexioa: Connect the +12V wire to a constant +12V power source, the GND wire to a solid chassis ground, and the REM (remote) wire to your head unit's remote turn-on output.
2. Audio sarrera: Connect your head unit's RCA outputs to the HB-2's balanced RCA inputs.
3. Audio irteera: Connect the HB-2's RCA outputs to your amplifier-en RCA sarrerak.
4. Urruneko kontrola: Connect the dash-mount remote control cable to the dedicated port on the HB-2 unit.

Irudia: The dash-mount remote control with its connecting cable, used for adjusting bass levels.

Funtzionamendu-argibideak

Controls on the HB-2 Unit

• MAX BASS CONTROL: Adjusts the overall intensity of the bass reconstruction. Start with a lower setting and increase gradually.
• FREQ CONTROL: Selects the center frequency for the bass reconstruction. This allows you to target specific bass frequencies for enhancement.
• WIDE/NARROW Switch: Determines the Q-factor or bandwidth of the bass reconstruction. 'Wide' affects a broader range of frequencies around the center frequency, while 'Narrow' focuses on a tighter range.

Dash-Mount Remote Control

The remote control allows you to adjust the bass output level from your listening position. Rotate the knob to increase or decrease the bass intensity. The illuminated display provides visual feedback.

Mantentzea

• Mantendu unitatea garbi zapi leun eta lehor batekin garbituz. Ez erabili produktu kimiko gogorrik edo garbitzaile urratzailerik.
• Ensure all connections remain secure. Periodically check wiring for any signs of wear or damage.
• Avoid blocking the ventilation openings on the unit to prevent overheating.

Arazoak konpontzea

• Potentziarik gabe: Check the +12V, Ground, and Remote connections. Ensure the remote turn-on signal from the head unit is active. Check for blown fuses in the power line.
• Baxu irteerarik ez: Verify all RCA input and output connections. Ensure the HB-2 unit is powered on. Adjust the 'MAX BASS CONTROL' and 'FREQ CONTROL' settings. Check the remote control connection.
• Soinu distortsionatua: Reduce the 'MAX BASS CONTROL' setting. Ensure the input signal from the head unit is not overdriven. Check amplifier irabazien ezarpenak.
• Urruneko kontrolak ez du erantzuten: Check the cable connection between the remote and the HB-2 unit.

Zehaztapenak

Bermea eta Laguntza

For warranty information, please refer to the documentation provided with your purchase. For technical assistance or support, please contact your authorized Hitron dealer or the point of purchase.