Polaroid PLRTC18 Shutter Release Timer Remote Control User Manual for Canon DSLR Cameras

1. Sarrera

The Polaroid PLRTC18 Shutter Release Timer Remote Control is designed to provide precise control over your camera's shutter, enabling advanced photographic techniques such as time-lapse, long exposures, and delayed shots. This device connects directly to your compatible Canon DSLR camera via a dedicated cable, allowing you to program various timing functions with accuracy.

A person holding the Polaroid PLRTC18 remote control while looking at a Canon DSLR camera mounted on a tripod, demonstrating typical usage.

Figure 1.1: User operating the PLRTC18 remote control with a camera on a tripod.

Please read this manual thoroughly to understand the features and proper operation of your new remote control.

2. Paketearen edukia

Polaroid PLRTC18 Shutter Release Timer Remote Control
Camera Connection Cables (2 types for broad compatibility)
Erabiltzailearen eskuliburua
AAA bateriak (2)

3. Konfigurazioa

3.1. Bateriaren instalazioa

The PLRTC18 requires two AAA batteries for operation. To install:

Kokatu bateriaren konpartimentuaren estalkia urrutiko agintearen atzealdean.
Irristatu estalkia geziak adierazten duen norabidean.
Sartu bi AAA pila, konpartimentuaren barruan markatutako polaritate zuzena (+/-) ziurtatuz.
Itxi bateriaren konpartimentuaren estalkia ondo sartu arte klik egin arte.

Image showing the battery compartment of the Polaroid PLRTC18 remote control with two AAA batteries inserted.

Figure 3.1: Battery compartment with two AAA batteries.

Oharra: To conserve battery life, it is recommended to remove the batteries when the remote control will not be used for an extended period, as there is no dedicated ON/OFF switch.

3.2. Zure kamerara konektatzea

The remote control connects to your camera using one of the provided cables. Identify the correct cable for your specific Canon DSLR model.

Plug one end of the appropriate connection cable into the remote control's port.
Plug the other end of the cable into your camera's remote control terminal. This is typically a 3-pin or mini headphone jack style port, often located on the side of the camera body.
Ziurtatu bi konexioak seguru daudela.

Image showing a 3-conductor mini plug cable connecting to a Canon camera's remote port.

Figure 3.2: Connecting the remote control cable to a Canon camera.

4. Funtzionamendu-argibideak

4.1. Kontrolakview

Familiarize yourself with the buttons and LCD display on the remote control:

Image of the Polaroid PLRTC18 remote control with labels pointing to the LCD display, SET button, arrow buttons, TIMER START/STOP, and /LOCK button.

Figure 4.1: PLRTC18 Remote Control Layout.

LCD pantaila: Shows current settings for DELAY, LONG, INTVL (Interval), and N (Number of exposures).
SET botoia: Used to enter setting mode and confirm selections.
Gezi-botoiak (Gora/Behera/Ezkerra/Eskuina): Used to navigate between settings and adjust values.
TIMER START/STOP Button: Initiates or stops the programmed timer sequence.
/LOCK Button: Functions as a manual shutter release (half-press for focus, full-press for shutter) and can lock the remote.

4.2. Setting Timer Functions

The remote control allows you to set four primary timing parameters: Delay, Long Exposure, Interval, and Number of Exposures. All settings can be adjusted up to 99 hours, 59 minutes, and 59 seconds in one-second increments.

Sakatu EZARTU button to enter the setting mode. The first parameter (DELAY) will begin to flash.
Erabili Ezkerrera/Eskuinera gezia buttons to navigate between DELAY, LONG, INTVL, and N.
Erabili Gora / behera gezia buttons to adjust the values for the selected parameter (hours, minutes, seconds).
After setting a value, press EZARTU again to move to the next digit or parameter.
Once all desired parameters are set, press EZARTU until the display stops flashing and returns to standby mode.

4.2.1. DELAY (Self-Timer)

This sets the amount of time before the first exposure sequence begins. Useful for getting into the shot or allowing camera vibrations to settle.

4.2.2. LONG (Exposure Time)

This sets the duration the camera's shutter will remain open for each exposure. Set your camera to Bulb mode for this function to work correctly.

4.2.3. INTVL (Interval Time)

This sets the time between the end of one exposure and the start of the next. Essential for time-lapse photography.

4.2.4. N (Number of Exposures)

This sets the total number of exposures the remote will trigger. Set to "---" for an unlimited number of shots.

4.3. Tenporizadorea abiaraztea eta gelditzea

Once your desired settings are programmed:

Sakatu TIMER START/STOP button to begin the programmed sequence. The LCD will display a countdown or active timer.
To stop an ongoing sequence, press the TIMER START/STOP botoia berriro.

4.4. Manual Shutter Release

The remote control can also function as a simple wired shutter release.

Prentsa erdia: Sakatu /BLOKETU button halfway down to activate your camera's autofocus.
Prentsa osoa: Sakatu /BLOKETU button fully down to trigger the shutter.
Locking the Shutter: For continuous shooting or long exposures in Bulb mode (without using the LONG timer function), press the /BLOKETU button fully down and slide it forward to lock it in the depressed position. Slide it back to release.

Image of a hand pressing the shutter release button on the Polaroid PLRTC18 remote control.

Figure 4.2: Manual shutter release operation.

5. Mantentzea

Garbiketa: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or solvents.
Bateria zaintzea: Remove batteries if the unit will not be used for an extended period to prevent leakage. Replace batteries when the low battery indicator appears on the LCD.
Biltegiratzea: Store the remote control in a cool, dry place, away from direct sunlight and extreme temperatures.
Kableen zainketa: Avoid bending or twisting the connection cables excessively to prevent damage.

6. Arazoak

Arazoa	Kausa posiblea	Irtenbidea
Remote control does not power on.	Pilak agortuta daude edo gaizki instalatuta daude.	Egiaztatu bateriaren polaritatea. Ordeztu AAA bateria berriekin.
Camera does not trigger.	Cable not securely connected. Incorrect cable for camera model. Camera not in appropriate mode (e.g., Bulb for long exposures). Camera battery is low.	Ensure cable is firmly connected to both remote and camera. Verify you are using the correct cable for your camera model. Set camera to Bulb mode for long exposures or appropriate shooting mode for other functions. Charge camera battery.
Timer sequence does not start.	Settings not confirmed or START button not pressed.	Ensure all settings are confirmed with EZARTU eta gero sakatu TIMER START/STOP.
LCD display is dim or flickering.	Bateria baxua.	Ordeztu AAA bateriak.

7. Zehaztapenak

Eredua: PLRTC18
Marka: Polaroid
Konektibitatea: Kableatua
Tenporizadorearen funtzioak: Delay, Long Exposure, Interval, Number of Exposures
Tenporizadorearen ezarpenak: 1 second to 99 hours, 59 minutes, 59 seconds (in 1-second increments)
Jaurtiketa kopurua: 1 to 9999, or unlimited (---)
Pantaila: Atzeko argiztatutako LCDa
Energia iturria: 2 x AAA bateria
Kolorea: Beltza

8. Camera Compatibility

The Polaroid PLRTC18 is compatible with a wide range of Canon Digital SLR cameras that utilize a 3-pin or mini headphone jack style remote control terminal. Compatible models include, but are not limited to:

Canon G10, G11, G12, G16
Canon EOS Digital Rebel series
Canon 60D, 70D
Canon Elan II/IIE, Elan 7/7E
Canon Rebel Ti /2000/G/GII/X/XS
Canon IX/IX Lite
Canon SX50 HS
Canon EOS Rebel T1i, T2, T2i, T3, T3i, T4i, T5, T5i, T6
And similar models with compatible shutter release ports.

Please consult your camera's manual to confirm the type of remote control port it uses.

9. Bermea eta Laguntza

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Polaroid webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.