D-Link GO-SW-5G 5-Port Gigabit Desktop Switch User Manual

1. Sarrera

The D-Link GO-SW-5G is a 5-Port Unmanaged Gigabit Desktop Switch designed for home and small office environments. This device provides a simple and cost-effective solution to expand your network connectivity, offering high-speed Gigabit Ethernet ports for reliable data transfer. It incorporates D-Link's Green Technology for energy efficiency, reduced heat generation, and extended product lifespan.

This switch is a plug-and-play device, requiring no complex configuration or software installation, making it easy to integrate into an existing network.

2. Paketearen edukia

Mesedez, egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:

• D-Link GO-SW-5G 5-Port Gigabit Desktop Switch
• Elikatze-moldagailua
• Instalazio azkarreko gida

If any items are missing or damaged, please contact your retailer for assistance.

3. Konfiguratzeko argibideak

The D-Link GO-SW-5G switch is designed for easy plug-and-play installation. Follow these steps to set up your device:

3.1. Konektatu korronte egokitzailea

1. Locate the power input port on the side of the D-Link GO-SW-5G switch.
2. Konektatu emandako energia-egokitzailea ataka honetara.
3. Entxufatu korronte-egokitzailearen beste muturra entxufe elektriko estandar batera.
4. The power LED on the front of the switch will illuminate, indicating that the device is receiving power.

1. irudia: Aldea view of the D-Link GO-SW-5G switch with the power input port.

3.2. Konektatu zure sarera

5. Using a standard Ethernet cable (RJ45), connect one end to an available LAN port on your router (not your modem).
6. Connect the other end of this Ethernet cable to any of the five available ports on the back of the D-Link GO-SW-5G switch.
7. The corresponding LED on the front of the switch will light up, indicating an active connection.

2. irudia: Atzekoa view of the D-Link GO-SW-5G switch with five Ethernet ports.

3.3. Connect Network Devices

8. Connect your network devices (e.g., computers, gaming consoles, network printers, smart TVs) to the remaining available Ethernet ports on the D-Link GO-SW-5G switch using Ethernet cables.
9. Each connected device will have its corresponding LED on the front of the switch illuminate, confirming a successful connection.

3. irudia: Aurrealdea view of the D-Link GO-SW-5G switch showing active port LEDs.

4. Funtzionamendu-argibideak

The D-Link GO-SW-5G is an unmanaged switch, meaning it operates automatically without requiring user configuration. Once connected as described in the Setup section, it will begin forwarding network traffic between connected devices.

• Negoziazio automatikoa: The switch automatically detects the network speed (10/100/1000 Mbps) and duplex mode (half/full) of connected devices and adjusts accordingly.
• MDI/MDIX automatikoa: All ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables when connecting to other switches or hubs.
• LED adierazleak: Each port has an LED indicator on the front panel. A lit LED indicates an active link, and blinking indicates network activity.

5. Mantentzea

To ensure optimal performance and longevity of your D-Link GO-SW-5G switch, consider the following maintenance guidelines:

• Lekua: Place the switch in a cool, dry location away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the device.
• Garbiketa: Use a soft, dry cloth to clean the exterior of the switch. Avoid using liquid or aerosol cleaners, as they may damage the device.
• Kableen kudeaketa: Keep Ethernet cables neatly organized to prevent tangles and accidental disconnections.
• Potentzia-zikloa: If you experience network issues, a simple power cycle (unplugging the power adapter for 10 seconds and then plugging it back in) can often resolve minor problems.

6. Arazoak

If you encounter issues with your D-Link GO-SW-5G switch, refer to the following common troubleshooting steps:

• Ez dago LED argirik:
  • Ziurtatu korronte-egokitzailea ondo konektatuta dagoela etengailura eta funtzionatzen duen entxufe elektriko batera.
  • Egiaztatu entxufea funtzionatzen duela beste gailu bat konektatuz.
• No Link/Activity LED for a Connected Device:
  • Egiaztatu Ethernet kablea ondo konektatuta dagoela bai switch atakan bai sareko gailuan.
  • Saiatu beste Ethernet kable batekin kable akastun bat baztertzeko.
  • Ziurtatu konektatutako gailua piztuta dagoela eta bere sare-egokitzailea behar bezala funtzionatzen duela.
  • Saiatu gailua etengailuko beste portu batera konektatzen.
• Sarearen abiadura motela:
  • Verify that all connected devices and cables support Gigabit Ethernet (1000 Mbps) for optimal performance. The switch will operate at the lowest common speed.
  • Ensure your router and internet service provider (ISP) plan support the desired speeds.
  • Perform a power cycle on the switch and your router.
• Etengabeko konexioa:
  • Egiaztatu kable konexio solteak.
  • Ensure the switch is not overheating; provide adequate ventilation.
  • Ethernet kable ezberdinekin probatu.

7. Zehaztapenak

8. Bermea eta Laguntza

Berme mugatua: The D-Link GO-SW-5G switch comes with a 3-year limited warranty. For detailed terms and conditions, please refer to the warranty information included in your package or visit the official D-Link webgunea.

Laguntza teknikoa: For technical assistance, product registration, or to download the latest firmware and documentation, please visit the D-Link laguntza Webgunea or contact D-Link customer service.