La Crosse Technology Color Projection Alarm Clock

Sarrera

This manual provides comprehensive instructions for the setup, operation, and maintenance of your La Crosse Technology Color Projection Alarm Clock (Model 616-146). This device offers accurate atomic time and date, indoor and outdoor temperature display, and a unique projection feature for time and/or outdoor temperature onto your ceiling or wall. It also includes a convenient USB charging port.

1. irudia: Aurrealdea view of the La Crosse Technology Color Projection Alarm Clock.

Konfigurazioa eta hasierako konfigurazioa

1. Unitatea elikatzea

• Connect the provided 5 Volt AC Adapter to the alarm clock and a power outlet.
• For battery backup, install 4 AAA batteries (not included) into the battery compartment, ensuring correct polarity. Use fresh, name-brand alkaline batteries dated at least 7 years in advance, testing voltage to ensure at least 1.48V.

2. Outdoor Sensor Setup

• Install batteries into the wireless outdoor temperature sensor first, following the diagrams in the battery compartment.
• Place the outdoor sensor and the display unit within 5 feet of each other for 15 minutes to establish a strong connection. Do not press any buttons during this time. An outdoor temperature reading should appear within the first minute.
• Mount the TX141 wireless weather-resistant transmitting sensor on a North-facing wall or in a shaded area, preferably under an eave or deck rail. Mount in a vertical position for proper moisture drainage. Avoid direct sunlight or radiating heat sources for accurate readings.

Figure 2: Alarm clock with outdoor sensor and USB charging capability.

3. Hasierako ordua eta data ezartzea

The clock automatically sets time via WWVB atomic time signal. If manual setting is required or preferred, follow these steps:

3. Irudia: Atzealdea view of the alarm clock with setting buttons.

1. WWVB ON/OFF: Eutsi SET/°F/°C button for 5 seconds. "WWVB" and "ON" will flash. Press +/TEMP or -/TIME to turn OFF if atomic time reception is not desired. Confirm with SET/°F/°C.
2. ORDU EREMU: "EST" will flash. Press +/TEMP or -/TIME to select your time zone (AST, EST, CST, MST, PST, AKT, HAT). Confirm with SET/°F/°C.
3. EGUNEKO ORDUA (DST): "DST" and "ON" will flash. Press +/TEMP or -/TIME to turn OFF if DST is not observed. Confirm with SET/°F/°C.
4. 12/24 HOUR TIME: "12H" will flash. Press +/TEMP or -/TIME to select "24H". Confirm with SET/°F/°C.
5. ORDUA: The hour will flash. Press +/TEMP or -/TIME to set the correct hour. Confirm with SET/°F/°C.
6. MINUTU: The minutes will flash. Press +/TEMP or -/TIME to set the correct minutes. Confirm with SET/°F/°C.
7. URTEA: The year will flash. Press +/TEMP or -/TIME to set the correct year. Confirm with SET/°F/°C.
8. HILABETEA: The month will flash. Press +/TEMP or -/TIME to set the correct month. Confirm with SET/°F/°C.
9. DATA: The date will flash. Press +/TEMP or -/TIME to set the correct date. Confirm with SET/°F/°C to exit the program menu.
10. The Day of the Week will set automatically after the year, month, and date are configured.
11. If no buttons are pressed for 20 seconds, the alarm will return to live display, saving any adjustments made.

Funtzionamendu-argibideak

1. Pantaila eta Atzeko argia

• The color LCD displays time, indoor temperature, outdoor temperature, and date.
• The display features a nighttime backlight for improved visibility in low light conditions.
• Adjust display brightness using the appropriate button (refer to device for specific button, often labeled "DIM" or similar).

2. Proiekzio Ezaugarria

• The projector can display time and/or outdoor temperature onto your ceiling or wall.
• The projection arm has 90-degree rotation for optimal positioning.
• Automatic focus ensures clear projection.

Figure 4: Projection of time and outdoor temperature.

Figure 5: Alarm clock projecting time in a bedroom setting.

3. USB kargatzeko ataka

• A USB port is integrated for convenient charging of compatible devices.

Mantentzea

To ensure optimal performance and longevity of your alarm clock:

• Garbitu pantaila eta casing bigun batekin, damp oihal. Saihestu garbitzaile edo disolbatzaile urratzaileak.
• Periodically check the outdoor sensor for debris or obstructions that might affect readings.
• Replace batteries in both the main unit (for backup) and the outdoor sensor annually, or when low battery indicators appear.

Arazoak konpontzea

Outdoor Temperature Shows Dashes or Not Syncing

• Lost Connection: Dashes indicate a lost connection between the display and the outdoor sensor. The station will display the last recorded data for 10 minutes before showing dashes.
• Pilak: Fresh batteries are the most common solution. Ensure batteries are new and properly installed.
• Kanalak: Confirm that the frequency on the sensor and the display are the same (this display is sold with a 433MHz version).
• Distance/Resistance: Avoid more than one wall, window, or tree between the display and sensor. UV-coated windows or stucco walls can reflect/absorb the signal.
• Birkokatzea: Try repositioning your sensor or display for better reception. Orient the display 90 degrees towards the thermo sensor for improved signal.

Restart Procedure (for connection issues)

1. Bring Sensor In: For best results, bring the outdoor sensor indoors and place it 5 feet from the display unit.
2. Kendu energia: Remove batteries from the sensor and batteries (and/or AC cord) from the display.
3. Discharge Electricity: With power removed, press any button on the display at least 20 times to clear all memory. Verify the display is blank.
4. Unpowered for 15 Minutes: Allow both units to remain without power for at least 15 minutes. Failure to do so can result in connection issues or missing segments on the display.
5. Instalatu bateriak: Place fresh batteries into the outdoor sensor first, ensuring correct installation. Then, install batteries (or AC cord) into the display.
6. Konexioa: Allow the sensor and display to remain 5 feet apart for 15 minutes to establish a strong connection. Do not press buttons during this time.

Zehaztapenak

Bermea eta Laguntza

Bermearen informazioa

Produktu hau a Berme mugatua. Please refer to the warranty description for full details: "1 limited warranty."

Laguntza osagarria

For further assistance, you may refer to the official user manual:

Deskargatu erabiltzailearen eskuliburua (PDF)

Additional documents are also available:

• Instalazio eskuliburua (PDF)
• Erabilera Argibideak (IFU) (PDF)
• Erabiltzailearen gida (PDF)