HP 1810-24G v2 Gigabit SFP Rack-Mountable Switch (J9803A) User Manual

1. Sarrera

This manual provides detailed instructions for the installation, configuration, and operation of the HP 1810-24G v2 Gigabit SFP Rack-Mountable Switch (Model J9803A). The HP 1810 Switch Series offers smart-managed, fixed-configuration Gigabit Layer 2 switching capabilities, designed for small business environments requiring an easy-to-administer networking solution.

Mesedez, irakurri arretaz eskuliburu hau gailua instalatzen edo erabiltzen saiatu aurretik. Gorde eskuliburu hau etorkizunean erreferentzia gisa.

2. Paketearen edukia

Carefully unpack the box and verify that all items are present and in good condition. If any item is missing or damaged, contact your vendor immediately.

• HP 1810-24G v2 Gigabit SFP Rack-Mountable Switch (J9803A)
• Elikatze kablea
• Rack-mounting hardware (brackets and screws)
• Documentation (Quick Start Guide, Safety and Regulatory Information)

2.1. irudia: The retail packaging for the HP 1810-24G v2 Gigabit SFP Rack-Mountable Switch. This box contains the switch unit and all included accessories.

2.2. irudia: Contents of the HP 1810-24G v2 Switch package, including the switch unit, power cord, and rack-mounting brackets with screws.

3. Deskribapen fisikoa

3.1 Aurreko panela

3.1. irudia: Aurrealdea view of the HP 1810-24G v2 Switch, showing the 24 Gigabit Ethernet ports and 2 SFP ports.

The front panel of the HP 1810-24G v2 Switch features the following components:

• 24 x 10/100/1000Base-T ataka: RJ-45 ports for connecting network devices using Ethernet cables. Each port supports auto-negotiation for speed and duplex mode.
• 2 x Gigabit SFP Ports: Small Form-Factor Pluggable ports for fiber optic connections, allowing for extended network reach or uplink to other network devices.
• LED adierazleak: Status LEDs for power, system activity, and individual port status (link/activity, speed).
• Berrezarri botoia: Fabrika-ezarpen lehenetsietara etengailua berrezartzeko erabiltzen da.

3.2 Atzeko panela

The rear panel typically includes the power input connector and possibly grounding points.

• AC korrontearen sarrera: Elikatze-kablearen konektorea.

4. Konfigurazioa eta instalazioa

4.1 Segurtasun-neurriak

• Ziurtatu energia iturria etengailuaren bolumenarekin bat datorrela.tage eskakizunak.
• Ez blokeatu aireztapen baoak.
• Avoid placing the switch in direct sunlight or near heat sources.
• Keep the switch away from water or damp inguruneak.

4.2 Muntatzeko aukerak

The HP 1810-24G v2 Switch supports both rack-mounting and wall-mounting.

4.2.1 Rack-en muntaketa

1. Lotu emandako rack muntatzeko euskarriak etengailuaren alboetara, barne dauden torlojuak erabiliz.
2. Secure the switch into a standard 19-inch equipment rack using appropriate rack screws (not always included).

4.2.2 Horman muntatzea

1. Identify a suitable wall location, ensuring adequate ventilation and access to power.
2. Use appropriate wall anchors and screws (not included) to secure the switch to the wall.

4.3 Potentzia konektatzea

1. Konektatu elikatze-kablearen mutur bat etengailuaren atzeko panelean dagoen korronte alternoko elikatze-sarrerara.
2. Konektatu kablearen beste muturra lurrera konektatutako entxufe elektriko batera.
3. Egiaztatu aurrealdeko paneleko pizteko LEDa piztuta dagoela, etengailuak energia jasotzen duela adieraziz.

4.4 Sare-konexioak

1. Connect your network devices (computers, servers, access points, etc.) to the RJ-45 Gigabit Ethernet ports using standard Ethernet cables.
2. For fiber optic connections, insert compatible SFP transceivers (not included) into the SFP ports, then connect fiber optic cables.
3. Observe the port LEDs to confirm link status and activity.

5. Funtzionamendu-argibideak

5.1 Hasierako konfigurazioa (Web Interfazea)

The HP 1810-24G v2 Switch is a smart-managed switch, configurable via a web- oinarritutako interfazea.

1. Connect a computer directly to any RJ-45 port on the switch using an Ethernet cable.
2. Configure your computer's IP address to be in the same subnet as the switch's default IP address (refer to the Quick Start Guide for default IP).
3. Ireki a web browser and enter the switch's default IP address.
4. Log in using the default username and password (refer to the Quick Start Guide).
5. Follow the on-screen prompts to change the default password and configure basic network settings, such as the switch's IP address, subnet mask, and gateway.
6. Arakatu web interface for advanced features like VLAN tagging, Link Aggregation (LACP), Spanning Tree Protocol (STP), Quality of Service (QoS), and SNMP.

5.2 Oinarrizko Sarearen Funtzionamendua

Once configured, the switch operates automatically to forward network traffic between connected devices.

• Plug and Play: Connect Ethernet devices to any available port. The switch will automatically detect the connection speed and duplex mode.
• Gigabit errendimendua: Supports Gigabit Ethernet speeds (1000 Mbps) for high-bandwidth applications.
• SFP Connectivity: Utilize SFP ports for fiber uplinks to connect to other switches or network segments over longer distances.

6. Mantentzea

6.1 Firmware eguneraketak

Periodically check the Hewlett Packard Enterprise (HPE) support webfirmware eguneratzeetarako gunea. Firmwarea eguneratuta mantentzeak errendimendu optimoa, segurtasuna eta funtzio berrietarako sarbidea bermatzen ditu.

1. Download the latest firmware from the official HPE support portal.
2. Sartu etengailura. web interfazea.
3. Joan firmwarearen eguneratze atalera eta jarraitu argibideei firmware berria kargatu eta instalatzeko.
4. Oharra: Do not power off the switch during a firmware upgrade.

6.2 Garbiketa

To maintain proper ventilation and prevent overheating, keep the switch clean.

• Erabili zapi leun eta lehor bat etengailuaren kanpoaldea garbitzeko.
• Erabili aire konprimatua aireztapen-zuloetatik hautsa kentzeko.
• Ez erabili garbitzaile likidorik edo aerosoletan.

6.3 Fabrika lehenetsitako ezarpenetara berrezartzea

If necessary, the switch can be reset to its factory default settings. This will erase all custom configurations.

1. With the switch powered on, locate the reset button on the front panel.
2. Erabili klip bat edo antzeko objektu zorrotz bat berrezartzeko botoia 10 segundo inguru sakatu eta eutsi.
3. Release the button when the system LEDs indicate a reset (refer to the Quick Start Guide for specific LED behavior).
4. The switch will reboot with factory default settings.

7. Arazoak

Atal honek aurki ditzakezun arazo ohikoenei irtenbideak eskaintzen ditu.

7.1 Potentziarik gabe

• Ziurtatu elikatze-kablea ondo konektatuta dagoela etengailura eta funtzionatzen duen entxufe elektriko batera.
• Egiaztatu entxufea funtzionatzen duela beste gailu bat konektatuz.
• Check the power LED on the front panel. If it is off, contact support.

7.2 Sare konexiorik ez

• Check the Ethernet cables for secure connections at both ends.
• Verify the link/activity LED for the connected port. If it is off, try a different port or cable.
• Ensure the connected device is powered on and configured correctly.
• If using SFP ports, ensure compatible transceivers are used and fiber cables are correctly connected.
• Confirm the switch's IP address and network settings are correct via the web interfazea.

7.3 Ezin da sartu Web Interfazea

• Ensure your computer's IP address is in the same subnet as the switch.
• Verify you are using the correct IP address for the switch.
• Garbitu zure arakatzailearen cachea edo saiatu beste arakatzaile bat erabiltzen.
• If the password was changed and forgotten, you may need to perform a factory reset (see Section 6.3).

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information and technical support, please refer to the official Hewlett Packard Enterprise (HPE) webgunea edo zure produktuarekin batera datorren dokumentazioa.

Important Notice Regarding Returns and Warranty: Please be aware that returns for non-defective items may not be accepted. Merchandise returned for repair and found not to be defective by technicians may incur a restocking fee. Additional warranty length options may be available; contact your vendor directly for more details.

Laguntza gehiago lortzeko, bisitatu ofiziala HPE Laguntza Webgunea.