LUXE Bidet NEO 320 Warm Water Bidet Attachment Instruction Manual

Produktua amaituview

The LUXE Bidet NEO 320 is a non-electric bidet attachment designed for toilet seats, offering warm water washing, dual nozzles, and self-cleaning functions. It features adjustable water pressure for a personalized experience, with separate settings for rear and feminine wash. The warm water is sourced from a sink connection, providing enhanced comfort and cleanliness.

Image: The LUXE Bidet NEO 320 control panel and nozzle assembly attached to a standard toilet.

Ezaugarri nagusiak

• Ur epelarekin garbiketa: Features adjustable water temperature for comfort and effective cleaning. Hot water connection is required from a sink.
• Dual Wash Modes: Includes a rear wash for a stronger spray and a feminine wash for a softer, front-angled spray.
• Hygienic Protection: Equipped with a guard gate to shield nozzles, which automatically retract after each use for sanitary protection.
• Instalazio erraza: Designed for simple attachment to most standard two-piece toilets, with all necessary parts and tools included.
• Eraikuntza iraunkorra: Features durable polyurethane hoses, layered ABS plastic construction, and UV-resistant coating for longevity.

Image: Visual representation of the NEO 320's dual wash modes (Feminine, Rear, Self-Clean) and key features like retractable nozzles and a protective guard gate.

Paketearen edukia

Your LUXE Bidet NEO 320 package includes all necessary components for installation:

• LUXE Bidet NEO 320 Attachment
• Cold Water Hose
• Hot Water Hose
• T-Adapters (for cold and hot water connections)
• Instalazio-tresnak
• Jabearen eskuliburua

Image: A complete set of LUXE Bidet NEO 320 components, including the bidet unit, hoses, T-adapters, and tools.

Instalazio Gida

The LUXE Bidet NEO 320 is designed for quick and easy DIY installation. Follow these steps for proper setup:

1. Itzali uraren hornidura: Locate the water supply valve for your toilet and turn it off. Flush the toilet to drain the tank.
2. Kendu komuneko eserlekua: Unscrew and remove your existing toilet seat.
3. Position Bidet Attachment: Place the NEO 320 attachment onto the toilet bowl, aligning the adjustable plates with the toilet seat bolt holes.
4. Reattach Toilet Seat: Place your toilet seat back over the bidet attachment and secure it with the original bolts. Ensure a snug fit.
5. Connect Cold Water: Disconnect the toilet's water supply hose from the fill valve. Install the cold water T-adapter to the fill valve, then reattach the toilet's water supply hose to the bottom of the T-adapter. Connect the bidet's cold water hose to the side of the T-adapter and to the bidet's cold water inlet.
6. Connect Hot Water (Optional): For warm water functionality, locate the hot water supply line under your sink. Turn off the hot water supply. Disconnect the sink's hot water supply hose. Install the hot water T-adapter to the hot water supply valve, then reattach the sink's hot water supply hose. Connect the bidet's hot water hose to the side of the T-adapter and to the bidet's hot water inlet.
7. Ur hornidura berreskuratu: Slowly turn on both the cold and hot (if connected) water supply valves. Check for any leaks.

Image: Simplified diagram showing the three main steps for installing the bidet attachment.

Instalazio Bideo Gida

Video: Official LUXE Bidet NEO 320 Installation Guide, providing visual instructions for setting up your bidet attachment.

Funtzionamendu-argibideak

The NEO 320 features intuitive controls for a customized cleaning experience:

Irudia: Xehetasun handikoa view of the bidet's control panel and nozzle system.

• Uraren presioa kontrolatzea: Use the main lever on the control panel to adjust the water pressure. Lift the lever to increase pressure, and lower it to decrease.
• Tenperatura kontrola: The top knob allows you to adjust the water temperature from cold to warm, by mixing hot water from your sink connection.
• Wash Mode Selection: The lower knob selects between "Feminine" wash, "Rear" wash, and "Nozzle Clean" modes.
  • Emakumezkoen garbiketa: Provides a softer, angled spray for front cleaning.
  • Atzeko garbiketa: Delivers a stronger spray for rear cleaning.

Mantentzea

To ensure optimal hygiene and longevity of your LUXE Bidet NEO 320:

• Toberen garbiketa: Use the "Nozzle Clean" setting on the control panel to rinse the nozzles with fresh water before or after use.
• Guard Gate: The protective guard gate shields the nozzles from debris. Ensure it is free from obstructions.
• Garbiketa orokorra: Wipe down the bidet attachment regularly with a mild, non-abrasive cleaner and a soft cloth. Avoid harsh chemicals that could damage the finish.
• Negua (hala badagokio): If the bidet is installed in an unheated area subject to freezing temperatures, disconnect the water supply and drain the bidet to prevent damage.

Image: Illustration highlighting the durable construction materials of the LUXE Bidet NEO 320, including polyurethane hoses and layered ABS plastic.

Zehaztapenak

Komuneko bateragarritasuna

The NEO 320 is designed to fit most standard U.S. toilets. Please refer to the diagram and measurements below to confirm compatibility with your toilet:

Image: A diagram illustrating key measurements (A, B, C, D, E) required to ensure the bidet fits your toilet.

• Center of Toilet to Wall: Min. 11.50"
• Center of Toilet to Edge: Max. 7.75"
• Distance Between Toilet Screws: Min. 3.50", Max. 8.25"
• Screw to Toilet Tank: Min. 1.00"
• Screw to Edge of Toilet Bowl: Max. 3.50"

Arazoak konpontzea

If you encounter any issues with your LUXE Bidet NEO 320, please consider the following common solutions:

• Ur-fluxurik ez: Ensure both cold and hot (if connected) water supply valves are fully open. Check all hose connections for tightness.
• Uraren presio ahula: Verify that the water pressure control lever is fully lifted. Check for any kinks in the water supply hoses.
• Isurketak: Inspect all connections for tightness. Ensure rubber washers are properly seated in the T-adapters and hoses. Do not overtighten connections, as this can cause damage.
• No Warm Water: Confirm that the hot water supply valve is open and that the hot water hose is correctly connected to a hot water source (e.g., under the sink). Allow a few moments for warm water to reach the bidet.

Bermea eta Laguntza

The LUXE Bidet NEO 320 comes with an 18-month warranty. You can register your bidet online to potentially receive an extended warranty.

For any questions, concerns, or assistance with installation or product issues, please contact our world-class Customer Care team. Support is available via live chat, email, or phone.

Visit the official LUXE Bidet website for additional resources, FAQs, and video guides: www.LuxeBidet.com

Image: LUXE Bidet customer support information, highlighting U.S. based support and online resources.