HERTZ DS-303
HERTZ Dieci Series DS-303 12-inch Subwoofer Instruction Manual
Eredua: DS-303
Sarrera
Thank you for choosing the HERTZ Dieci Series DS-303 Subwoofer. This manual provides essential information for the proper installation, operation, and maintenance of your subwoofer. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
The HERTZ Dieci Series DS-303 is a 12-inch (300mm) car audio subwoofer designed for high efficiency and exceptional power handling. It features a polypropylene membrane and butyl rubber surround for high excursion with minimal distortion. An efficient cooling system ensures optimal heat dissipation. This subwoofer is suitable for use in compact sealed or reflex enclosures.
Segurtasun Informazioa
Beti beti segurtasun-neurri hauek:
- Disconnect the vehicle's battery negative terminal before starting any installation work to prevent electrical shorts.
- Ziurtatu kableatu guztiak behar bezala isolatuta eta finkatuta daudela bibrazioek edo ertz zorrotzek eragindako kalteak saihesteko.
- Ez instalatu subwooferra gidariaren ikusmena oztopatzen duten lekuetan. view or interfere with vehicle safety systems (e.g., airbags).
- Use appropriate gauge wiring for power and speaker connections to handle the subwoofer's power requirements.
- Avoid exposing the subwoofer to excessive moisture or direct sunlight.
- Instalazio prozesuaren edozein atalen inguruan ziur ez bazaude, kontsultatu instalatzaile profesional bati.
Kutxan dagoena
Despaketatzean, ziurtatu elementu guztiak bertan daudela:
- HERTZ Dieci Series DS-303 Subwoofer
- Argibide eskuliburua (dokumentu hau)
- Mounting Screws (if included by manufacturer)
Note: Additional accessories such as speaker wire, amplifier, and enclosure are sold separately.
Konfigurazioa eta Instalazioa
Proper installation is crucial for optimal performance. This section outlines general guidelines. Specific enclosure design and wiring diagrams may vary based on your vehicle and ampdeformatzaileen konfigurazioa.
1. Enclosure Selection and Preparation
The DS-303 subwoofer is designed for use in compact sealed or reflex (vented) enclosures. Refer to the subwoofer's specifications for recommended enclosure volumes.

Irudia: Atzealdea view of the HERTZ Dieci Series DS-303 Subwoofer, displaying the magnet structure and wiring terminals.
- Ensure the enclosure is robust and free from air leaks.
- Cut a circular opening in the enclosure baffle that matches the subwoofer's mounting diameter.
- Pre-drill pilot holes for the mounting screws to prevent damage to the enclosure or subwoofer frame.
2. Kableatu konexioak
The DS-303 features a 4-Ohm Single Voice Coil (SVC). Connect the subwoofer to a compatible ampirteera biziagoa.

Irudia: Aurrealdea view of the HERTZ Dieci Series DS-303 Subwoofer, highlighting the polypropylene cone.
- Konektatu subwooferraren terminal positiboa (+) bozgorailuaren terminal positiboarekin (+). amplifergailuaren subwoofer irteera.
- Konektatu subwoofer-aren terminal negatiboa (-) bozgorailuaren terminal negatiboari (-) amplifergailuaren subwoofer irteera.
- Ensure all connections are secure and free from short circuits.
- Use appropriate gauge speaker wire for the power handling of the subwoofer and the distance to the ampbiziagoa.
3. Subwooferra muntatzea

Irudia: Angelua view of the HERTZ Dieci Series DS-303 Subwoofer, showing the robust frame and mounting holes.
- Carefully place the subwoofer into the prepared opening in the enclosure.
- Align the mounting holes on the subwoofer frame with the pre-drilled holes in the enclosure.
- Secure the subwoofer using the provided mounting screws. Tighten screws evenly in a crisscross pattern to ensure a tight, even seal. Do not overtighten.
Funtzionamendu-argibideak
Once installed, follow these steps to operate your HERTZ DS-303 Subwoofer:
- Hasierako piztea: After all connections are made and verified, reconnect the vehicle's battery. Turn on your car audio system.
- AmpLider ezarpenak: Adjust the gain, crossover frequency, and phase settings on your amplifier according to your system's requirements and personal preference. Start with low gain and gradually increase.
- Atsedenaldia: Allow a break-in period of approximately 10-20 hours of normal listening at moderate volumes. This allows the subwoofer's suspension components to loosen and achieve optimal performance.
- Bolumen kontrola: Avoid operating the subwoofer at excessively high volumes for extended periods, as this can lead to overheating and damage. If you hear distortion, reduce the volume immediately.
Mantentzea
The HERTZ DS-303 Subwoofer requires minimal maintenance to ensure long-lasting performance:
- Garbiketa: Erabili zapi leun eta lehor bat konoa eta ingurua astiro-astiro garbitzeko. Saihestu produktu kimiko gogorrak edo garbitzaile urratzaileak erabiltzea.
- Ikuskapena: Aldian-aldian ikuskatu subwooferra konoan, ingurunean edo hauts-tapoian kalterik dagoen ikusteko. Egiaztatu kableen konexioak estutasuna eta korrosioa duten.
- Ingurumena babestea: Keep the subwoofer free from dust, debris, and extreme temperatures.
Arazoak konpontzea
Subwooferrarekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ez dago soinurik subwooferretik |
|
|
| Baxu distortsionatua edo lausoa |
|
|
| Subwoofer gets hot |
|
|
If the problem persists after trying these solutions, contact HERTZ customer support or a qualified car audio technician.
Zehaztapen Teknikoak
| Ezaugarri | Zehaztapena |
|---|---|
| Eredua | DS-303 |
| Tamaina | 300 mm (12 hazbete) |
| Potentzia maneiatzea (gailurra) | 1000 W |
| Power Handling (Continuous RMS) | 250 W |
| Inpedantzia | 4 Ω (Ohm) |
| Maiztasun Erantzuna | 28 • 300 Hz |
| Sentikortasuna | 91 dB SPL |
| Ahots bobinaren diametroa | 38 mm (1.5 hazbete) |
| Material magnetikoa | Dentsitate handiko fluxu ferrita |
| Kono Materiala | Polypropylene with Mica injection |
| Inguruko materiala | Butil-kautxua |
| Xmax (Gehienezko Txango Lineala) | 9 mm |
| Elementuaren pisua | 8.8 libra (4 kg) |
| Konektibitate Teknologia | Kableatua |
| Fabrikatzailea | Electtromedia |
Bermearen informazioa
The HERTZ Dieci Series DS-303 Subwoofer comes with a Limited Warranty. Please refer to the warranty card included with your product or visit the official HERTZ website for detailed terms and conditions. This warranty typically covers manufacturing defects for a specified period from the date of purchase.
Note: Damage caused by improper installation, abuse, accident, or unauthorized modifications is not covered under warranty.
Bezeroarentzako Arreta
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact HERTZ customer support:
- Webgunea: www.hertzaudio.com
- Posta elektronikoa: Jo ezazu ofiziala webkontaktu-formularioetarako edo helbide elektronikoetarako gunea.
- Telefonoa: Jo ezazu ofiziala webeskualdeko harremanetarako zenbakietarako gunea.
When contacting support, please have your product model (DS-303) and proof of purchase readily available.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.