Flysky FS-GT3C RC Transmitter User Manual

1. Sarrera

The Flysky FS-GT3C is a 2.4GHz 3-channel digital proportional radio control system designed for RC cars and boats. It features an LCD screen display, high receiving sensitivity, and adopts AFHDS (Automatic Frequency Hopping Digital System) for stable performance and strong anti-jamming capabilities. This manual provides detailed instructions for setup, operation, and maintenance of your FS-GT3C transmitter and FS-GR3E receiver.

2. Zer dago kutxan

Upon unboxing your Flysky FS-GT3C, you should find the following components:

• Flysky FS-GT3C RC Transmitter (Orange)
• Flysky FS-GR3E Receiver
• USB kargatzeko kablea
• 1S 3.7V 800mAh Li-Po Transmitter Battery
• Extra Grip (if included)
• Argibide eskuliburua

Figure 2.1: Package Contents of the FS-GT3C Transmitter and Receiver.

3. Ezaugarri nagusiak

• LCD screen display for easy navigation and settings adjustment.
• High receiving sensitivity for reliable control.
• 3-channel remote control suitable for various RC cars and boats.
• Operates within 2.4GHz to 2.48GHz frequencies, utilizing 160 wave bands.
• Employs AFHDS (Automatic Frequency Hopping Digital System) for robust signal integrity.
• Transmitter powered by a rechargeable 3.7V Li-ion battery.
• Features super active and passive anti-jamming capabilities.
• Designed for very low power consumption and stable performance.
• Ergonomic design with rounded edges for comfortable handling.
• Adjustable steering wheel for personalized grip.

Figure 3.1: Ergonomic design and antenna features of the FS-GT3C.

4. Konfigurazio gida

4.1. Bateria instalatzea eta kargatzea

The FS-GT3C transmitter uses a rechargeable 3.7V Li-ion battery. To install or replace the battery:

1. Bilatu bateriaren konpartimentuaren estalkia transmisorearen behealdean.
2. Slide the cover open and remove it.
3. Insert the 3.7V Li-ion battery, ensuring correct polarity.
4. Jarri bateriaren konpartimentuaren estalkia ondo sartu arte klik egin arte.

To charge the transmitter battery, connect the supplied USB charge cable to the transmitter's charging port and a suitable USB power source.

Figure 4.1: Battery compartment of the FS-GT3C transmitter.

4.2. Receiver Binding (Pairing)

To establish communication between the transmitter and receiver, they must be bound. Refer to the specific instructions provided with your FS-GR3E receiver for the detailed binding procedure. Generally, this involves:

1. Ensure both transmitter and receiver are powered off.
2. Connect the bind plug to the B/VCC port on the receiver.
3. Power on the receiver. The receiver's LED should flash rapidly.
4. Press and hold the "BIND" button on the transmitter while powering it on.
5. The transmitter's LCD screen will display "BINDING". Once successful, the receiver's LED will become solid, and the transmitter will return to its main screen.
6. Release the BIND button on the transmitter, then power off both the transmitter and receiver.
7. Kendu lotzeko entxufea hargailutik.
8. Power on the transmitter first, then the receiver. They should now be bound and communicate.

4.3. Connecting to a Computer (Simulator Port)

The FS-GT3C features a simulate port, allowing connection to a computer for use with RC simulators. This can be a valuable tool for practicing driving skills without risking damage to your RC vehicle.

• Locate the "DSC" (Digital Simulator Connector) port on the side of the transmitter.
• Connect a compatible USB adapter cable (sold separately) from the DSC port to your computer's USB port.
• Install the necessary simulator software and drivers on your computer.
• Follow the simulator software's instructions to calibrate and use the transmitter as a controller.

5. Funtzionamendu-argibideak

5.1. Oinarrizko Kontrolak

The FS-GT3C features standard pistol-grip controls for intuitive operation:

• Bolantea: Controls the steering of your RC vehicle. Turn left for left, right for right.
• Throttle Trigger: Pull the trigger towards you for forward motion (acceleration). Push the trigger away from you for reverse motion (braking/reverse).

Figure 5.1: Labeled components of the FS-GT3C transmitter.

5.2. LCD Display and Menu Navigation

The LCD display allows access to various settings and adjustments. Use the buttons next to the screen for navigation:

• ENTER/Confirm Key: Used to select an option or confirm a setting.
• Itzultzeko giltza: Used to go back to the previous menu or cancel an action.
• GORA/BEHERA geziak: Menu aukeretan nabigatzeko edo balioak doitzeko erabiltzen da.
• END Key: Typically used to exit a menu or save settings.

5.2. irudia: Xehetasuna view of the FS-GT3C LCD display.

5.3. Adjusting Settings (Trim, D/R, EXP, ABS)

The FS-GT3C offers several adjustable parameters to fine-tune your vehicle's performance:

• TRIM (Steering Trim / Throttle Trim): Adjusts the neutral position of steering or throttle. Use the dedicated trim levers or buttons.
• D/R (Dual Rate): Adjusts the maximum steering angle. Useful for limiting steering throw for different driving conditions or skill levels.
• EXP (Exponential): Modifies the sensitivity of the steering or throttle around the center point. A higher exponential value makes the control less sensitive around the center.
• ABS (ABS balazta blokeatze sistema): Simulates ABS braking by pulsing the brakes, preventing wheel lock-up during hard braking.

5.4. Kanalaren ezarpenak

The FS-GT3C is a 3-channel transmitter. You can configure the output of each channel:

• Channel 1 (Steering): Typically controls the steering servo.
• Channel 2 (Throttle): Controls the motor/ESC for forward and reverse.
• 3 kanala: An auxiliary channel that can be assigned to various functions, such as lights, winches, or gear shifting, depending on your RC vehicle's setup.

6. Mantentzea

Proper maintenance ensures the longevity and optimal performance of your FS-GT3C transmitter:

• Garbiketa: Use a soft, dry cloth to clean the transmitter. Avoid using solvents or harsh chemicals.
• Bateria zaintzea:
  • Always use the provided USB cable for charging the internal Li-ion battery.
  • Ez kargatu bateria gehiegi edo deskargatu sakonki.
  • Denbora luzez gordetzen baduzu, kargatu bateriaren edukieraren % 50 inguru arte.
• Biltegiratzea: Gorde transmisorea leku fresko eta lehor batean, eguzki-argitik, tenperatura altuetatik eta hezetasun handitik babestuta.
• Antenak zaintzea: Handle the antenna with care to prevent bending or breaking.

7. Arazoak

The transmitter features a low voltage shut-off to protect the battery. If the voltage drops too low, the transmitter may power off automatically.

8. Zehaztapenak

• Kanalak: 3
• Maiztasuna: 2.4GHz - 2.48GHz
• Modulazioa: GFSK
• Sistema: AFHDS
• Vol. Baxuatage Abisua: Yes (less than 3.7V)
• DSC ataka: Bai (USB)
• Elikatze-iturria: 3.7V (1S Li-Po battery)
• Produktuaren neurriak: 7.9 x 7.3 x 5.1 hazbete
• Elementuaren pisua: 12 ontza
• Modelo zenbakia: FS GT-3C-24OR
• Fabrikatzailea: Konodox
• Lehenengo data eskuragarri: 1ko martxoaren 2013a

9. Bermea eta Laguntza

The Flysky FS-GT3C RC Transmitter comes with a 1 urteko bermea from the manufacturer. For warranty claims or technical support, please contact the vendor or manufacturer directly. Keep your proof of purchase for warranty validation.