JJC TM-R Multi-Function LCD Timer Remote Control User Manual

Sarrera

The JJC TM-R is a versatile wired multi-function LCD timer remote control designed for select Fujifilm cameras. It provides precise control over various camera functions, including self-timer, interval shooting, long exposure (bulb mode), and continuous shooting. This manual will guide you through the setup, operation, and maintenance of your TM-R remote control.

Image: The JJC TM-R remote control connected to a Fujifilm X-M1 camera. The remote features an LCD screen and several control buttons.

Paketearen edukia

• JJC TM-R Multi-Function LCD Timer Remote Control
• Connecting Cable (integrated or detachable, depending on model variant)
• Erabiltzailearen eskuliburua (dokumentu hau)

Produktua amaituview

Familiarize yourself with the components of your JJC TM-R remote control:

Irudia: Xehetasun handikoa view of the JJC TM-R remote control's interface.

• LCD pantaila: Displays settings for delay, exposure time, interval, and number of shots.
• START/STOP botoia: Initiates or stops the timer sequence.
• HOLD botoia: Functions as a two-step shutter release button. Press halfway to focus, fully to trigger the shutter. Can also lock the shutter open in Bulb mode.
• LOCK etengailua: Botoiak ustekabean sakatzeak saihesten ditu.
• Directional Pad (Up/Down/Left/Right/Set): Used to navigate menus and adjust time values.
• Pizteko etengailua (ON/OFF): Located on the side of the unit.
• Bozgorailuaren ikonoa: Indicates sound notification status.
• DE (Delay): Setting for self-timer.
• BU (Bulb): Setting for long exposure.
• INT (tartea): Setting for interval shooting.
• N (Number): Setting for the number of shots.

Konfigurazioa

1. Bateriaren instalazioa

1. Kokatu bateriaren konpartimendua urrutiko agintearen atzealdean.
2. Ireki konpartimenduaren estalkia.
3. Sartu bi AAA pila, polaritate zuzena ziurtatuz (+/-).
4. Itxi bateriaren konpartimenduaren estalkia ondo.

2. Zure kamerara konektatzea

1. Ziurtatu kamera itzalita dagoela.
2. Locate the remote control terminal on your Fujifilm camera. This is typically a small port, often labeled "REMOTE" or similar.
3. Connect the cable from the JJC TM-R remote control to the camera's remote control terminal. Ensure the connection is firm.
4. Piztu kamera.

Image: The remote control's cable connected to the camera's remote port.

Funtzionamendu-argibideak

The JJC TM-R offers several shooting modes. Use the directional pad to navigate between settings (DE, BU, INT, N) and adjust values. Press the 'Set' button (center of directional pad) to confirm selections.

Basic Shutter Release

• Sakatu EUTSI button halfway to focus.
• Sakatu EUTSI button fully to trigger the shutter.

Self-Timer (DE - Delay)

This mode allows you to set a delay before the shutter is released.

1. Piztu urruneko kontrola.
2. Use the directional pad to select the DE (Delay) setting.
3. Adjust the desired delay time (from 0s to 99h 59min 59s) using the Up/Down buttons.
4. Sakatu HASI/GELDITU to begin the countdown. The shutter will fire after the set delay.

Long Exposure (BU - Bulb)

For exposures longer than your camera's maximum shutter speed.

1. Set your camera to Bulb mode.
2. Urruneko gailuan, hautatu BU (Bulb) setting.
3. Adjust the desired exposure duration (from 0s to 99h 59min 59s).
4. Sakatu HASI/GELDITU to open the shutter. The shutter will close after the set duration.
5. Bestela, luze sakatu EUTSI button fully, then slide the BLOKATU switch to keep the shutter open for an indefinite period. Slide BLOKATU back to release.

Interval Shooting (INT - Interval)

Capture a series of images at regular intervals, ideal for time-lapse photography.

1. Hautatu INT (Interval) setting.
2. Set the desired interval time (e.g., one exposure every 20s). This is the time between the start of one exposure and the start of the next.
3. Also set the N (Number) of shots you wish to take. Set to '---' for unlimited shots.
4. Sakatu HASI/GELDITU to begin the interval sequence.

Combined Modes

The TM-R allows you to combine settings for complex sequences:

• Delay + Interval + Number: Set a delay before the interval sequence begins, then take a specified number of shots at set intervals.
• Delay + Bulb + Interval + Number: Set a delay, then take a specified number of long exposures at set intervals.

Always ensure your camera's settings (e.g., exposure mode, focus) are appropriate for the remote control's programmed sequence.

Mantentzea

• Garbiketa: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or solvents.
• Biltegiratzea: Gorde urrutiko agintea leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik babestuta.
• Bateria: Kendu pilak urrutiko agintea denbora luzez erabiliko ez baduzu, isuriak saihesteko.
• Kableen zainketa: Avoid sharp bends or kinks in the connecting cable to prevent damage.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

For warranty information and technical support, please refer to the documentation provided at the time of purchase or visit the official JJC webgunea. Informazio gehiago ere aurki dezakezu JJC Brand Store on Amazon.