Jensen JTA-222 3-Speed Turntable with AM/FM Radio Instruction Manual

Sarrera

This manual provides detailed instructions for the setup, operation, and maintenance of your Jensen JTA-222 3-Speed Turntable with AM/FM Stereo Radio. Designed with an antique wooden case, this unit allows you to enjoy your vinyl records and radio broadcasts with ease. Please read this manual thoroughly before using your turntable to ensure proper function and longevity.

Ezaugarri nagusiak

• 3-Speed Stereo Turntable (33/45/78 RPM)
• AM/FM Stereo Receiver with FM Stereo Indicator
• External Stereo Speaker Output Terminals
• Aurikularretarako estereoa
• Potentzia adierazle argia
• 2 Built-in Front-Facing Speakers
• Hautsaren babesa
• Antique Wooden Case Design
• Built-in Pitch Control for fine-tuning record speed
• Powered by 120V AC, 60Hz

Kutxan dagoena

• Jensen JTA-222 3-Speed Turntable Unit
• Hauts Estalkia
• Korronte alternoko elikatze-kablea (integratua)
• Argibide eskuliburua (dokumentu hau)

Konfigurazioa

1. Despaketatzea: Carefully remove the turntable from its packaging. Retain all packing materials for future transport or storage.
2. Lekua: Place the unit on a flat, stable surface away from direct sunlight, heat sources, and excessive dust or vibration. Ensure adequate ventilation around the unit.
3. Hauts-estalkia: The dust cover is pre-installed. Ensure it can open and close freely.
4. Arkatzaren babesa: Remove the clear plastic stylus protector from the needle assembly before first use. Gently slide it forward and off.
5. Potentzia-konexioa: Entxufatu korronte alternoko kablea 120V-ko korronte alternoko eta 60Hz-ko hormako entxufe estandar batera.
6. Kanpoko konexioak (aukerakoak):
   • Entzungailuak: Connect stereo headphones to the HEADPHONE jack on the front of the unit.
   • Kanpoko hizlariak: For enhanced audio, connect external passive speakers to the EXTERNAL SPEAKER OUTPUT TERMINALS on the rear of the unit. Ensure correct polarity (+ to + and - to -).

Image: The Jensen JTA-222 Turntable with its lid open, showcasing a vinyl record on the platter and the control panel.

Funtzionamendu-argibideak

Turntable Funtzionamendua

1. Piztu: Turn the POWER/VOLUME knob clockwise until it clicks and the Power Indicator light illuminates. Adjust the volume to a low level.
2. Aukeratu funtzioa: Turn the PHONO/AM/FM-ST knob to 'PHONO'.
3. Lekuaren erregistroa: Open the dust cover and place a vinyl record on the turntable platter.
4. Hautatu Abiadura: Set the SPEED SELECTOR switch (located near the tonearm) to the appropriate speed for your record (33, 45, or 78 RPM).
5. Hasi erreprodukzioa: Gently lift the tonearm using the cueing lever. Position the tonearm over the desired track on the record. Lower the cueing lever to gently place the stylus onto the record. The platter will begin to spin automatically.
6. Doitu bolumena: Adjust the POWER/VOLUME knob to your desired listening level.
7. Pitch kontrola: Use the PITCH CONTROL knob to slightly adjust the playback speed if needed.
8. Amaitu erreprodukzioa: At the end of the record, the tonearm will automatically return to its rest position and the platter will stop spinning. To stop playback manually, lift the tonearm using the cueing lever and return it to the tonearm rest.

Irudia: Xehetasun handikoa view of the turntable platter, tonearm, and stylus during record playback.

AM/FM irratiaren funtzionamendua

1. Piztu: Turn the POWER/VOLUME knob clockwise until it clicks and the Power Indicator light illuminates.
2. Aukeratu funtzioa: Turn the PHONO/AM/FM-ST knob to 'AM' for AM radio or 'FM-ST' for FM stereo radio. The FM Stereo Indicator will light up when an FM stereo broadcast is received.
3. Sintonizazio-estazioa: Biratu SINTONIZAZIO botoia nahi duzun irrati-katea hautatzeko.
4. Doitu bolumena: Adjust the POWER/VOLUME knob to your desired listening level.
5. Antena: For optimal FM reception, extend the FM wire antenna located on the back of the unit. For AM reception, the unit has a built-in AM antenna.

Irudia: Goitik behera view of the Jensen JTA-222 with the dust cover closed, highlighting the radio tuning dial and function/volume knobs.

Mantentzea

• Unitatea garbitzea: Garbitu unitatearen kanpoaldea leun batekin, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Cleaning the Dust Cover: Use a soft, lint-free cloth to gently wipe the dust cover. Avoid harsh chemicals that may scratch or cloud the plastic.
• Estiletoa garbitzea: Periodically clean the stylus (needle) with a soft brush, brushing gently from back to front. A dirty stylus can affect sound quality and damage records.
• Estiletearen ordezkapena: The stylus is a consumable part and will wear out over time. If sound quality deteriorates significantly, consider replacing the stylus. Refer to the manufacturer's website or authorized dealers for compatible replacement styli.
• Erregistroen zaintza: Mantendu zure diskoak garbi eta hautsik gabe. Gorde itzazu bertikalki beren zorroetan deformatu ez daitezen.

Arazoak konpontzea

Zehaztapenak

• Eredua: JTA-222
• Marka: Jensen
• Potentzia: AC 120V ~ 60Hz
• Turntablearen abiadura: 33 1/3, 45, 78 RPM
• Irrati-maiztasunak: AM/FM Stereo
• Hizlariak: 2 Built-in Front-Facing
• Konektibitatea: External Speaker Output, Headphone Jack
• Diseinua: Antique Wooden Case
• Elementuaren pisua: 6.3 kilo

Bermea eta laguntza

Your Jensen JTA-222 Turntable comes with a 30 eguneko bermea erosketa-datatik aurrera, fabrikazio-akatsak estaliz. Gorde erosketaren egiaztagiria berme-erreklamazioetarako.

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Jensen customer support. Contact information can typically be found on the manufacturer's official webgunean edo produktuaren ontzian.