BLACK+DECKER D988 Finishing Attachment Sander Instruction Manual

Sarrera

This manual provides essential instructions for the safe and effective use of your BLACK+DECKER D988 Finishing Attachment Sander. Please read this manual thoroughly before operating the tool and retain it for future reference.

Segurtasun informazio garrantzitsua

Beti beti oinarrizko segurtasun neurriak sute, deskarga elektriko eta lesio pertsonalak murrizteko.

• Erabili begi-babesak.
• Erabili entzuteko babesa.
• Ziurtatu pieza ondo dagoela clamped.
• Mantendu eskuak alde mugikorretatik.
• Deskonektatu tresna energia-iturritik osagarriak aldatu edo mantentze-lanak egin aurretik.
• Erabili gomendatutako osagarriak soilik.

Konfigurazioa

Image showing the BLACK+DECKER D988 Finishing Attachment Sander, a compact sanding head designed to attach to a compatible power unit.

Despaketatzea

Carefully remove the finishing attachment sander and all accessories from the packaging. Inspect for any damage.

Attaching to Power Unit

The D988 is an attachment. Ensure your BLACK+DECKER power unit is compatible.

1. Align the attachment with the power unit's drive shaft.
2. Push the attachment firmly onto the power unit until it clicks into place.
3. Verify the attachment is securely fastened before use.

Lixa-orriak lotzea

The D988 uses hook-and-loop sanding sheets.

1. Ensure the power unit is disconnected from the power supply.
2. Peel off the old sanding sheet if present.
3. Align the new sanding sheet with the base of the attachment, ensuring the holes (if any) match for dust extraction.
4. Press the sanding sheet firmly onto the hook-and-loop base.

Funtzionamendu-argibideak

Funtzionamendu Orokorra

Connect the power unit to a suitable power source.

Eutsi irmo tresna bi eskuekin.

Place the sanding base flat on the workpiece before starting the tool.

Move the sander slowly and evenly over the surface. Avoid applying excessive pressure, as this can reduce efficiency and damage the workpiece or tool.

For optimal results, sand with the grain of the wood.

Hautsa erauztea

If your power unit or attachment has a dust extraction port, connect a suitable dust bag or vacuum cleaner to minimize dust exposure.

Mantentzea

Mantentze-lan erregularrak errendimendu optimoa bermatzen du eta zure tresnaren bizitza luzatzen du.

Garbiketa

After each use, disconnect the tool from the power supply.

Garbitu tresnaren kanpoaldea iragarkiarekinamp oihal. Ez erabili produktu kimiko gogorrak edo garbitzaile urratzaileak.

Clear any dust buildup from the ventilation openings to prevent overheating.

Sanding Pad Inspection

Periodically inspect the hook-and-loop sanding pad for wear or damage. A worn pad will not hold sanding sheets effectively. Replace if necessary.

Biltegiratzea

Gorde tresna leku lehor eta seguru batean, haurren eskura ez dagoen lekuan.

Arazoak konpontzea

Zehaztapenak

• Eredua: D988
• Marka: BLACK+DECKER
• Elementuaren pisua: 500 gramo
• Biraketa-abiadura maximoa: 10000 bira/min
• ASIN: B00IQQ92IG
• Fabrikatzailea: Black & Decker

Bermea eta Laguntza

For warranty information or technical support, please refer to the documentation provided with your BLACK+DECKER power unit or visit the official BLACK+DECKER webgunea.

This attachment is covered by the standard BLACK+DECKER warranty applicable to its power tool system.