Ozone OES-BAS-22 Electronic Safe-Core User Manual

1. Sarrera

This user manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your Ozone OES-BAS-22 Electronic Safe-Core. Please read this manual thoroughly before using the safe to ensure optimal performance and security. This electronic safe is designed to provide secure storage for your valuables.

2. Produktua amaitu daview

This image displays the front panel of the Ozone OES-BAS-22 Electronic Safe-Core, highlighting the electronic keypad, key override lock, and the overall compact design. The keypad allows for digital code entry, while the key provides an alternative access method.

3. Konfigurazioa

3.1. Bateriaren instalazioa

1. Aurkitu bateriaren konpartimentua, normalean kutxa gotorraren atearen barrualdean.
2. Ireki bateriaren estalkia.
3. Insert the required number of batteries (usually AA or AAA, refer to the compartment label) ensuring correct polarity (+/-).
4. Itxi bateriaren estalkia ongi.

3.2. Hasierako Kodearen Ezarpena

1. With the safe door open, locate the reset button (often a small red or green button) on the inside of the door or near the battery compartment.
2. Press the reset button. You should hear a beep or see an indicator light.
3. On the keypad, enter your desired new code (typically 3-8 digits).
4. Confirm the code by pressing the 'E' or '#' button.
5. Test the new code with the door open to ensure it works correctly before closing the safe.

4. Funtzionamendu-argibideak

4.1. Opening the Safe with Electronic Code

1. Sartu zure kode pertsonala teklatuan.
2. Press the 'E' or '#' button.
3. Within 5 seconds of a successful code entry, turn the handle clockwise (or counter-clockwise, depending on model) to open the door.

4.2. Opening the Safe with Override Key

1. Locate the keyhole, usually hidden behind a small cover on the keypad panel.
2. Insert the override key and turn it.
3. While holding the key turned, rotate the handle to open the safe door.

4.3. Kutxa gotorra ixtea eta blokeatzea

1. Itxi ondo kutxa gotorraren atea.
2. Turn the handle counter-clockwise (or clockwise) until the bolts are fully extended and the door is securely locked.

4.4. Changing Your Personal Code

1. Kutxa gotorraren atea irekita duzula, berrezartzeko botoia sakatu.
2. Enter your new desired code (3-8 digits) on the keypad.
3. Press the 'E' or '#' button to confirm.
4. Verify the new code by entering it with the door open before closing.

5. Mantentzea

• Bateria ordezkatzea: Replace batteries annually or when the low battery indicator (if present) illuminates. Always use new, high-quality batteries of the specified type.
• Garbiketa: Garbitu kutxa gotorraren kanpoaldea oihal leun eta lehor batekinamp cloth. Avoid abrasive cleaners or solvents that could damage the finish or keypad.
• Giltzen biltegiratzea: Store override keys in a secure location away from the safe itself. Do not store them inside the safe.
• Mekanismoaren egiaztapena: Periodically check the locking bolts and door hinges for smooth operation. Do not lubricate the electronic lock mechanism.

6. Arazoak

7. Zehaztapenak