Sarrera
The Lithonia Lighting FMLWL LED linear wraparound fixture is designed to provide bright, even illumination. This low-maintenance fixture delivers 1,200 lumens of 4000K cool white light with a long-lasting LED engine, ensuring up to 50,000 hours of energy-efficient performance. Its durable construction features a sturdy metal housing with decorative plastic end caps and a white polycarbonate diffuser that distributes light evenly while reducing glare. This fixture is suitable for various indoor applications including hallways, offices, closets, utility areas, bathrooms, and kitchens.
This version is non-dimming.
Segurtasun Informazioa
OHARRA: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Irakurri argibide guztiak instalatu aurretik.
- Ziurtatu hornidura boltage is correct (120V).
- Ez egin edo aldatu zulo irekirik kableatu edo osagai elektrikoen itxitura batean kitaren instalazioan.
- Kablearen kalteak edo urradurak saihesteko, ez jarri kablea txapa edo beste objektu zorrotzen ertzetan.
- Egokia damp kokapenak.
Paketearen edukia
Verify that all parts are included before beginning installation.
- Lithonia Lighting FMLWL LED Wraparound Fixture (Model FMLWL 24 840)
- Argibide eskuliburua
- Muntatzeko hardwarea (torlojuak, kable-azkoinak)
Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Marka | Lithonia Argiztapena |
| Modelo zenbakia | FMLWL 24 840 |
| Tamaina | 24-Inch (24.45"L x 5.48"W x 2.5"H) |
| Kolore Tenperatura | 4000K Zuri Hotza |
| Distira | 1200 Lumens (rated for 70% output for 50,000 hours) |
| liburukiatage | 120 Volt |
| Wattage | 12 watt |
| Materiala | Alloy Steel, Polycarbonate Shade |
| Instalazio mota | Sabaian edo horman muntatzeko modukoa |
| Barruko/Kanpoko erabilera | Barrualdea (D)amp Kokapena Baloratua) |
| Ezaugarri bereziak | Easy to Install, Non-dimming |
| Ziurtagiriak | UL and CSA listed, DLC |
Instalazioa
This fixture is designed for easy surface-mount installation on ceilings or walls. Always ensure power is disconnected before starting installation.
Instalazio urratsak:
- Prestatu gailua: Remove fixture components and parts pack. Check that all parts are included. Carefully remove the diffuser from the housing.
- Sarbide kableatua: Remove the wireway cover by removing two screws securing the cover to the fixture housing. Locate the black supply wire, the white neutral wire, and the green grounding wire. Push all three wires out the back of the fixture through the coined hole.
- Lurreratzea: Hold the fixture housing firmly and connect the green ground wire from the fixture to the bare copper ground wire from the junction box using a wirenut.
- Konexio elektrikoak: Use wirenuts to connect the black fixture wire to the black supply wire and the white (neutral) fixture wire to the white supply wire.
- Muntaketa: Align keyholes on the back of the fixture housing with screws previously installed in the junction box. Lift the fixture up, rotate clockwise, and tighten screws to secure the housing assembly against the ceiling.
- Berriz muntatu: Starting at one end of the housing, insert the diffuser slot onto the edge of the housing. Carefully squeeze the diffuser to engage the opposite side with the housing. Continue this action down the length of the diffuser until fully installed onto the housing.
Laguntza bisuala:
Bideoaren deskribapena: This video provides a detailed product overview and installation guide for the FMLWL LED Wraparound Light. It visually demonstrates how to disassemble the fixture, connect the wiring, mount it to the ceiling, and reattach the diffuser, including steps for selecting color temperature and lumen output.
Produktuen irudiak:
Funtzionamendu-argibideak
The Lithonia Lighting FMLWL 24 840 is a non-dimmable fixture. It operates by a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture ON or OFF.
Mantentzea
This LED fixture is designed for low maintenance. To ensure optimal performance and appearance:
- Garbiketa: Disconnect power before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or diffuser.
- LED Engine: The integrated LED engine is designed for long life and does not require bulb replacement.
Arazoak konpontzea
If the fixture does not operate correctly, refer to the following:
- Argirik gabe:
- Check that power is supplied to the fixture at the circuit breaker.
- Ziurtatu hari-konexio guztiak seguru daudela.
- Argi keinukaria:
- Verify that the fixture is not connected to a dimmer switch, as this model is non-dimmable.
- Egiaztatu kable bidezko konexio solteak.
Arazoak jarraitzen badute, kontsultatu elektrizista kualifikatu bati.
Bermea eta Laguntza
This Lithonia Lighting FMLWL LED fixture is backed by a 5 urteko berme mugatua. For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Lithonia Lighting webgunea.
