1. Produktua amaitu daview
The Permatex 81160 High-Temp Red RTV Silicone Gasket Maker is a specialized sealant designed for heavy-duty applications requiring resistance to extreme temperatures. This product forms reliable gaskets that can withstand intermittent temperatures ranging from -65°F eta 650°F (-54°C eta 343°C).
It is formulated to create durable, flexible, and waterproof seals for various automotive and industrial repair needs.
Image 1.1: Permatex 81160 High-Temp Red RTV Silicone Gasket tube. This image shows the product packaging, highlighting the brand, product name, and key features.
2. Segurtasun informazioa
Always read and understand all safety precautions before using this product. Use personal protective equipment as required.
2.1. Precautionary Statements - Prevention
- Contains: Calcium carbonate, Iron oxide.
- Lortu argibide bereziak erabili aurretik.
- Ez maneiatu segurtasun neurri guztiak irakurri eta ulertu arte.
- Erabili norberaren babeserako ekipamendua behar den moduan.
2.2. Precautionary Statements - Response
- BEGIETAN BADA: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
- AZALA BADUZ: Wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice/attention. Wash contaminated clothing before reuse.
2.3. Precautionary Statements - Storage
- Babestu eguzki-argitik.
- Gorde ondo aireztatutako leku batean.
- Denda itxita.
- Mantendu haurren eskura.
3. Konfigurazioa
3.1. Azalera prestatzea
For optimal results, ensure that all surfaces where the gasket maker will be applied are garbi eta lehorra. Remove any old gasket material, grease, oil, or other contaminants that could interfere with adhesion.
4. Aplikaziorako jarraibideak
- Prestatu tobera: Moztu pita nahi duzun aleen tamainara.
- Apply Gasket Maker: Apply a continuous bead of silicone, approximately 1/16" to 1/4" (2 to 6mm) thick, to one surface. Ensure the bead surrounds all bolt holes.
- Piezak muntatu: Immediately assemble the parts while the silicone is still wet.
- Hasierako estutzea: Finger tighten the assembly until the material begins to squeeze out around the flange.
4.1 irudia: Adibideaample of Permatex 81160 High-Temp Red RTV Silicone Gasket application. This image illustrates the product being applied as a continuous bead on a surface.
5. Curing and Finishing
- Initial Dry Time: Allow the gasket maker to dry for ordubete.
- Azken estutzea: After the initial dry time, tighten the assembly to the manufacturer's specified torque.
- Sendatzeko denbora osoa: Baimendu 24 ordu for the gasket maker to fully cure before filling with fluids or returning the component to service.
6. Mantentzea
6.1. Produktuen biltegiratzea
Erabilera bakoitzaren ondoren, replace the cap securely to prevent the product from drying out. Store the tube in a cool, dry, well-ventilated area, away from direct sunlight and out of reach of children.
7. Troubleshooting and Limitations
Ohar garrantzitsua: Produktu hau da NOT recommended for use on head gaskets or on parts that will come into direct contact with gasoline. Using the product in these applications may lead to product failure and potential damage.
8. Produktuaren zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Produktuaren izena | Permatex High-Temp Red RTV Silicone Gasket Maker |
| Modelo zenbakia | 81160 |
| Marka | Permatex |
| Materiala | Silikona |
| Kolorea | Gorria |
| Temperature Range (Intermittent) | -65°F eta 650°F (-54°C eta 343°C) |
| Sendatze Denbora osoa | 24 ordu |
| Elementuaren bolumena | 3 ontza fluidoa |
| Uraren Erresistentzia Maila | Iragazgaitza |
| UPC | 686226811608 |
9. Ezabatzeko informazioa
Dispose of contents and container in accordance with local regulations and to an approved waste disposal plant. Do not dispose of in household waste.
10. Kontaktua eta laguntza
For further assistance or inquiries, please contact Permatex:
- Fabrikatzailea: Permatex Chemicals, a division of ITW
- Helbidea: Solon, OH 44139, USA
- Doakoa: 866-732-9502
- Webgunea: www.permatex.com
Permatex and its design are trademarks of Illinois Tool Works Inc. The product is assembled in the U.S.A. with U.S. and global materials.
11. Bermearen informazioa
Specific warranty details for Permatex products are typically available on the manufacturer's official website or by contacting their customer support directly. Please refer to www.permatex.com edo deitu 866-732-9502 bermeari buruzko informazio eguneratuena lortzeko.
