Legrand 138074 Manual Call Point Instruction Manual

1. Produktua amaitu daview

The Legrand 138074 is a manual call point designed for fire alarm systems. It features a white housing, two contacts, and an integrated LED indicator. This device allows for manual activation of a fire alarm in emergency situations, providing a clear visual and tactile indication of activation.

1. irudia: Aurrealdea view of the Legrand 138074 Manual Call Point.

2. Segurtasun informazioa

Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in property damage, injury, or death.

• Instalazio profesionala: Installation must be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
• Potentzia deskonexioa: Always disconnect power to the circuit before performing any installation, maintenance, or troubleshooting.
• liburukiatage Egiaztatu: Egiaztatu elikadura hornidura boltage gailuaren zehaztapenekin bat dator.
• Ingurumen-baldintzak: Do not install in areas with excessive moisture, extreme temperatures, or corrosive environments.
• Osagaien Osotasuna: Ez erabili gailua piezaren bat hondatuta badago.

3. Paketearen edukia

Egiaztatu osagai guztiak daudela eta kalterik gabe daudela paketea irekitzean:

• Legrand 138074 Manual Call Point (1 unit)
• Mounting Screws (quantity as supplied)
• Argibide eskuliburua (dokumentu hau)

4. Konfigurazioa eta instalazioa

The Legrand 138074 Manual Call Point is designed for surface or flush mounting. Ensure the chosen location complies with local fire safety regulations regarding accessibility and visibility.

4.1. Muntaketa

1. Prestatu Muntatzeko Azalera: Ensure the surface is clean, dry, and flat.
2. Markatu zulatzeko puntuak: Use the call point's base as a template to mark the positions for mounting screws.
3. Zulatzeko zuloak: Drill pilot holes appropriate for the mounting screws.
4. Ziurtatu oinarria: Attach the call point's base securely to the wall using the provided screws.

4.2. Kableatua

Refer to the wiring diagram below and your fire alarm control panel's documentation for correct connection. This device features 2 contacts and an LED indicator.

• Connect the alarm circuit wires to the designated terminals (typically NO/NC contacts).
• Connect the LED indicator wires to the appropriate power source and signaling circuit as per your system's requirements.
• Ziurtatu konexio guztiak seguru eta behar bezala isolatuta daudela.

2. irudia: Barnekoa view and wiring terminals of the Legrand 138074 Manual Call Point.

4.3. Azken Batzarra

1. Carefully place the front cover onto the mounted base, ensuring all wires are tucked away and not pinched.
2. Secure the cover with any retaining screws or clips provided.
3. Restore power to the circuit and test the device according to your fire alarm system's testing procedures.

5. Funtzionamendu-argibideak

In the event of a fire or other emergency requiring immediate alarm activation:

1. Locate the Call Point: Identify the nearest Legrand 138074 Manual Call Point.
2. Alarma aktibatu: Firmly press the designated activation area on the call point. This action will typically break a frangible element or activate a switch.
3. Egiaztatu aktibazioa: The integrated LED indicator should illuminate, confirming that the call point has been activated and the signal sent to the fire alarm control panel.
4. Ebakuatu: Follow your building's emergency evacuation procedures.

Note: Resetting the call point typically requires a special key or tool to return the activation mechanism to its original state after an alarm. Consult your fire alarm system administrator for reset procedures.

6. Mantentzea

Regular maintenance ensures the reliable operation of your manual call point.

• Ikus-ikuskapena: Periodically inspect the call point for any signs of physical damage, tampering, or obstruction. Ensure the LED is functional during system tests.
• Garbiketa: Clean the exterior of the call point with a soft, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Proba funtzionalak: Conduct regular functional tests as required by local fire safety regulations and your fire alarm system's maintenance schedule. This should be performed by qualified personnel.
• Osagaien ordezkapena: If the frangible element is broken or the device is damaged, it must be replaced by a qualified technician.

7. Arazoak

If you encounter issues with your Legrand 138074 Manual Call Point, refer to the table below. For problems not listed, contact qualified service personnel.

8. Zehaztapenak

9. Bermearen informazioa

Legrand products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please retain your proof of purchase. For detailed warranty information, refer to the official Legrand website or contact Legrand customer support in your region.

10. Laguntza eta Kontaktua

For technical assistance, product inquiries, or to report issues, please contact Legrand customer support. You can find contact information, including phone numbers and online support portals, on the official Legrand webgunea:

www.legrand.com

Laguntzarekin harremanetan jartzean, izan zure produktuaren modelo zenbakia (138074) eta erosketaren xehetasun garrantzitsuak prest.