M-Wave M30HCW Bicycle Computer

1. Sarrera

Thank you for choosing the M-Wave M30HCW Wireless Bicycle Computer. This device is designed to enhance your cycling experience by providing comprehensive data about your rides. It features wireless transmission for a clean setup and a wide range of functions to track your performance and progress. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.

Image 1.1: M-Wave M30HCW Bicycle Computer. This image displays the main unit of the M-Wave M30HCW bicycle computer, showcasinbere diseinu trinkoa eta pantaila argia direla eta.

2. Segurtasun informazioa

• Always prioritize road safety. Do not operate the computer or adjust settings while cycling in traffic.
• Ensure the computer is securely mounted to prevent it from detaching during your ride.
• Mantendu bateriak haurren eskura. Irensten bada, bilatu berehala medikuaren arreta.
• Tokiko araudien arabera bota bateriak. Ez erraustu.
• The device has an Ingress Protection rating of IP44, meaning it is protected against splashing water from any direction. It is not designed for submersion.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• M-Wave M30HCW Cyclocomputer Unit
• Wireless Speed/Cadence Sensor
• Gurpil Imana
• Mounting Bracket (for handlebar or stem)
• Mounting Ties/Bands
• CR2 Batteries (4 required, included)

4. Konfigurazioa

4.1. Bateriaren instalazioa

1. Open the battery compartment on the back of the cyclocomputer unit and the wireless sensor.
2. Insert the CR2 batteries, ensuring correct polarity (+/-).
3. Itxi bateriaren konpartimentuak ongi.

4.2. Mounting the Cyclocomputer

The M-Wave M30HCW features tool-free mounting for quick installation.

1. Attach the mounting bracket to your bicycle's handlebar or stem using the provided ties or bands. Ensure it is firmly secured and positioned for easy viewing.
2. Slide the cyclocomputer unit onto the mounting bracket until it clicks into place.

4.3. Mounting the Wireless Sensor and Magnet

1. Attach the wireless sensor to the front fork of your bicycle, ensuring it is aligned with the wheel spokes.
2. Mount the wheel magnet to a spoke on the front wheel. Position the magnet so it passes within 5mm of the sensor as the wheel rotates.
3. Ensure the sensor and magnet are securely fastened and do not interfere with wheel rotation or braking.

4.4. Hasierako Konfigurazioa

After battery installation, the computer will typically prompt you for initial settings. Use the buttons (usually MODE and SET) to navigate and confirm selections.

• Unitateak: Select between metric (km/h, km) and imperial (mph, miles) units.
• Gurpilen Tamaina: Input your wheel circumference in millimeters (mm). Refer to your bicycle tire for this value or measure it accurately. This is crucial for accurate speed and distance readings.
• Ordua: Set the current time (24-hour or 12-hour format).
• Pisua: Enter your body weight for calorie calculation.

5. Funtzionamendu-argibideak

The M-Wave M30HCW features an LED backlit display for easy reading and is operated via buttons, typically located on the front or bottom of the unit.

5.1. Oinarrizko funtzioak

The computer automatically powers on and off. When you start cycling, it will activate and begin recording data. When stationary, it will enter a power-saving mode.

• Oraingo abiadura: Zure bizikleta-abiadura denbora errealean erakusten du.
• Batez besteko abiadura: Shows the average speed for your current ride.
• Gehienezko abiadura: Records the highest speed achieved during your ride.
• Bidaiaren distantzia: Measures the distance covered in the current ride.
• Kilometroa: Tracks the total accumulated distance.
• Ibilaldiaren denbora: Zure uneko bidaiaren iraupena erregistratzen du.
• Kadentzia: Measures your pedaling revolutions per minute (RPM).
• altimeter: Provides altitude measurements for climb tracking.
• Heart Rate Monitor/Alarm: (If applicable, requires compatible HR sensor, not included with base unit) Monitors heart rate and can alert if thresholds are exceeded.
• Kaloria-kontsumoa: Estimates calories burned based on ride data and user weight.
• Termometroa: Inguruko tenperatura erakusten du.

5.2. Botoiaren funtzionamendua

Typically, the computer will have one or two buttons for navigation and selection:

• MODE botoia: Press briefly to cycle through different display modes (e.g., speed, distance, time). Press and hold to enter settings or reset trip data.
• SET botoia: Used to confirm selections or adjust values within settings menus.

Refer to the on-screen prompts for specific button functions during setup and operation.

6. Mantentzea

• Garbiketa: Garbitu ordenagailu unitatea eta sentsorea zapi leun eta lehor batekinamp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Uraren erresistentzia: The device is IP44 rated, protecting it from splashing water. Avoid high-pressure washing or submerging the unit.
• Bateria ordezkatzea: Ordeztu bateriak bateria baxuaren adierazlea pantailan agertzen denean. Ziurtatu bateria mota eta polaritatea egokiak direla.
• Biltegiratzea: If storing the bicycle for an extended period, remove the batteries from the computer and sensor to prevent leakage.

7. Arazoak

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information and technical support, please refer to the documentation provided with your purchase or contact M-Wave customer service directly. Keep your proof of purchase for any warranty claims.