NGS Wild Funky

NGS WILDFUNKY Bluetooth Speaker User Manual

Model: Wild Funky

Sarrera

The NGS WILDFUNKY is a versatile portable audio system designed for enjoying music from your smartphone, tablet, or laptop via Bluetooth. It also offers direct 3.5mm auxiliary connection, USB, and Micro SD card playback. Featuring an integrated battery for approximately 4 hours of autonomy, an LED display, and controls for volume, bass, and echo, this speaker is equipped with wheels and a retractable handle for easy transport. A microphone is included for speeches or singing.

Paketearen edukia

  • NGS WILDFUNKY Bluetooth Speaker
  • Mikrofonoa
  • Erabiltzailearen eskuliburua (dokumentu hau)
  • Urtebeteko berme txartela

Konfigurazioa

1. Bozgorailua kargatzea

Before first use, fully charge the speaker's integrated battery. Connect the power adapter to the speaker's DC IN port and then to a power outlet (AC 230V - 50Hz). The LED indicator will show the charging status. A full charge provides approximately 4 hours of playback.

2. Piztu/Itzaltzea

Locate the power switch on the back panel of the speaker. Flip the switch to the "ON" position to power on the device. The LED display will light up. To power off, flip the switch to the "OFF" position.

3. Retractable Handle and Wheels

For easy transport, extend the retractable handle by pulling it upwards. The speaker is equipped with wheels, allowing you to roll it like a trolley. Push the handle down to retract it when not in use.

NGS WILDFUNKY speaker with retractable handle extended, showing its portable design with wheels.

Figure 1: NGS WILDFUNKY speaker with its retractable handle extended for portability.

Aldea view of the NGS WILDFUNKY speaker with the retractable handle extended, highlighting the wheels and robust casing.

2. irudia: Aldea view of the NGS WILDFUNKY speaker, illustrating the extended handle and wheels.

Funtzionamendu-argibideak

Gertutik view of the NGS WILDFUNKY speaker's control panel, showing ports for USB, TF (Micro SD), Aux In, and knobs for Volume, Treble, Mic Vol, Echo, and Mic input.

Figure 3: Control Panel of the NGS WILDFUNKY speaker.

1. Kontrol panela baino gehiagoview

The control panel, located on the top/rear of the speaker, features various inputs and adjustment knobs:

  • AUX IN: 3.5 mm-ko audio sarrera kanpoko gailuetarako.
  • USBa: Port for USB flash drives.
  • TF (Mikro SD): Slot for Micro SD cards.
  • bolumena: Master bolumena kontrolatzeko botoia.
  • Treble: Adjusts high-frequency sounds.
  • MIC VOL: Mikrofonoaren bolumena doitzen du.
  • OHARRA: Adjusts echo effect for the microphone.
  • Mikrofonoa: 6.35mm input for the included microphone.
  • LED pantaila: Uneko modua, pistaren zenbakia edo FM maiztasuna erakusten ditu.
  • Modu botoia: Switches between Bluetooth, USB, Micro SD, AUX, and FM Radio modes.
  • Errepikatu botoia: Controls playback repeat functions.
  • Erreprodukzio kontrolak: Erreproduzitu/Pausatu, Aurreko pista, Hurrengo pista.

2. Bluetooth konexioa

  1. Power on the NGS WILDFUNKY speaker.
  2. Sakatu Modua button until "Bluetooth" or "BT" appears on the LED display. The speaker will enter pairing mode, indicated by a flashing Bluetooth icon or sound.
  3. Zure telefonoan, tabletan edo ordenagailuan, gaitu Bluetooth eta bilatu eskuragarri dauden gailuak.
  4. Select "NGS WILDFUNKY" from the list of devices.
  5. Once paired, the speaker will confirm the connection, and the Bluetooth indicator will stop flashing. You can now play audio from your device through the speaker.

3. USB / Micro SD Playback

  1. Insert a USB flash drive or a Micro SD card (with MP3, RealAudio, or WMA files) into the respective port (USB or TF).
  2. The speaker should automatically switch to USB or TF mode and begin playing music. If not, press the Modua botoia sarrera zuzena hautatzeko.
  3. Use the playback controls (Play/Pause, Previous/Next Track) to manage your music.

4. AUX sarrera

  1. Konektatu 3.5 mm-ko audio-kable baten mutur bat (ez dago barne) AUX ataka bozgorailuan.
  2. Connect the other end of the cable to the audio output jack of your external device (e.g., MP3 player, non-Bluetooth laptop).
  3. Sakatu Modua botoia "AUX" modua hautatzeko.
  4. Play audio from your external device. Adjust volume using both the speaker's BOLUMENA knob and your device's volume controls.

5. FM Irratia

  1. Sakatu Modua button to switch to "FM Radio" mode.
  2. Bozgorailuak automatikoki eskuragarri dauden FM irratiak bilatu eta gordeko ditu.
  3. Erabili Aurrekoa/Hurrengo pista botoiak gordetako irratien artean nabigatzeko.

6. Mikrofonoaren erabilera

  1. Plug the included microphone into the MIKROA sarrerako jack.
  2. Doitu mikrofonoaren bolumena erabiliz MIC VOL botoia.
  3. Erabili OHARRA botoia zure ahotsari oihartzun efektua gehitzeko.

Mantentzea

  • Garbiketa: Erabili zapi leun eta lehor bat bozgorailuen kanpoaldea garbitzeko. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
  • Biltegiratzea: Gorde bozgorailua leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik babestuta.
  • Bateria zaintzea: Bateriaren iraupena luzatzeko, saihestu bateria maiz erabat deskargatzea. Kargatu bozgorailua aldizka, denbora luzez erabiltzen ez baduzu ere.
  • Uraren esposizioa: Bozgorailu hau ez da iragazgaitza. Saihestu uretan edo gehiegizko hezetasunean jartzea.

Arazoak konpontzea

Potentziarik gabe:
Ensure the speaker is fully charged or connected to a power source. Check the power switch is in the "ON" position.
Soinurik ez:
Check the volume level on both the speaker and your connected device. Ensure the correct input mode (Bluetooth, AUX, USB, TF, FM) is selected. Verify audio cables are securely connected.
Bluetootha ez da konektatzen:
Ensure the speaker is in Bluetooth pairing mode. Make sure Bluetooth is enabled on your device and it's within range (typically 10 meters). Try unpairing and re-pairing the device. Restart both the speaker and your Bluetooth device.
FM irratiaren harrera eskasa:
Try repositioning the speaker to improve signal reception. Environmental factors can affect FM signal quality.
Mikrofonoa ez dabil:
Ensure the microphone is securely plugged into the MIC input. Adjust the MIC VOL knob. Test with another microphone if available to rule out a faulty microphone.

Zehaztapenak

Ereduaren izenaWild Funky
MarkaNGS
RMS potentzia irteera40 W
Konektibitate TeknologiaBluetooth, 3.5mm Aux, USB, Micro SD (TF Card)
Haririk gabeko TeknologiaBluetootha
Gailu bateragarriakSmartphone, PC, Tablet
Onartutako audio formatuakMP3, RealAudio, WMA
Energia iturriaIntegrated Battery (Lithium-ion), AC 230V - 50Hz
Bateria motaLitio-ioi integratua
Bateria Voltage3.7 V
Approx. Battery Autonomy4 ordu
KontrolakVolume, Bass, Echo, Mic Vol, Playback controls, Mode, Repeat
Bistaratzeko motaLED
Neurriak (L x W x H)24.8 x 19 x 41.2 cm
Pisua5.05 kg
KoloreaGrisa/Beltza

Bermearen informazioa

The NGS WILDFUNKY Bluetooth speaker comes with a 2 urteko bermea from the date of purchase. Please retain your proof of purchase and the included warranty card for any warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Laguntza

For further assistance, technical support, or information regarding your NGS WILDFUNKY speaker, please visit the official NGS website or contact their customer service department. Refer to the warranty card or product packaging for specific contact details in your region.

Informazio gehiago ere aurki dezakezu honi buruz: NGS Brand Store on Amazon.

© 2023 NGS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.