Universal Office Chair Assembly Manual

1. Segurtasun informazio garrantzitsua

Mesedez, irakurri arretaz argibide guztiak muntatu eta erabili aurretik. Gorde eskuliburu hau etorkizunean erreferentzia gisa.

• Ziurtatu pieza guztiak daudela eta kalterik gabe muntatzen hasi aurretik. Ez erabili piezaren bat falta bada edo kaltetuta badago.
• Assemble the chair on a soft, clean surface to prevent scratching.
• Ez estutu gehiegi torlojuak muntaketa bitartean, osagaiak kaltetu baititzake.
• Mantendu haurrak eta maskotak muntaketa-eremutik urrun. Pieza txikiek itotzea eragin dezakete.
• Only use the chair for its intended purpose.
• Ez jarri aulkian.

2. Paketearen edukia

Verify that all components listed below are included in your package.

3. Muntatzeko jarraibideak

Follow these steps carefully to assemble your office chair.

1. Lotu gurpilak izar-oinarrira: Insert each caster (F) into the holes at the end of each leg of the star base (E). Push firmly until they click into place.
2. Txertatu gas-igogailua: Place the gas lift cylinder (D) into the center hole of the assembled star base (E). Ensure it sits securely.
3. Lotu mekanismo-plaka eserlekuari: Align the mechanism plate (G) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism plate faces the front of the seat. Secure with four M8x25mm screws (I) using the Allen wrench (J).
4. Lotu beso-euskarriak eserlekuari: Attach the armrests (C) to the underside of the seat cushion (B) using four M6x20mm screws (H), two per armrest. Do not fully tighten yet.
5. Attach Chair Back to Armrests: Align the chair back (A) with the remaining holes on the armrests (C). Secure with the remaining four M6x20mm screws (H), two per armrest. Now, fully tighten all armrest screws.
6. Konektatu eserlekuaren multzoa gas-igogailura: Carefully place the assembled seat and back onto the gas lift cylinder (D) protruding from the star base. Press down firmly to secure.

Your office chair is now assembled.

4. Funtzionamendu-argibideak

Familiarize yourself with the chair's adjustment features for optimal comfort.

• Altuera doitzea: To raise the seat, lift the lever located under the right side of the seat while taking your weight off the chair. To lower the seat, lift the lever while seated. Release the lever at the desired height.
• Tilt Lock/Unlock: Pull the same lever outwards to unlock the tilt function, allowing the chair back to recline. Push the lever inwards to lock the chair back in an upright position.
• Inklinazio tentsioa: Rotate the round knob located under the front-center of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Armrest Adjustment (if applicable): Some models feature adjustable armrests. Look for buttons or levers on the armrests to adjust their height or pivot.

5. Mantentzea

Regular maintenance will prolong the life of your office chair.

• Garbiketa: Garbitu gainazalak leun batekin, damp cloth. For fabric upholstery, use a mild fabric cleaner. Avoid harsh chemicals or abrasive cleaners.
• Loturaren egiaztapena: Aldian-aldian egiaztatu torloju eta azkoin guztiak ondo estututa daudela ziurtatzeko. Beharrezkoa bada, berriro estutu.
• Caster Cleaning: Remove any hair or debris that may accumulate around the casters to ensure smooth movement.
• Lubrifikazioa: The gas lift cylinder is maintenance-free. Do not attempt to lubricate it.

6. Arazoak

Atal honetan ohiko arazoen irtenbideak aurkituko dituzu.

7. Zehaztapenak

Key technical details of your office chair.