Oregon Scientific BAR206 Weather Forecast Temperature Station

Sarrera

The Oregon Scientific BAR206 Weather Forecast Temperature Station is designed to provide accurate indoor and outdoor temperature readings, indoor humidity, and a 12-24 hour weather forecast. It features an atomic clock for precise timekeeping and an Ice Alert function. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

Segurtasun Informazioa

• Ez jarri unitate nagusia muturreko tenperaturen, eguzki-argiaren edo hezetasunaren eraginpean.
• Ensure the wireless sensor is placed in a sheltered location to protect it from direct rain and sunlight, which can affect accuracy and battery life.
• Use only the specified battery types (AA for main unit, AA for remote sensor).
• Ez nahastu bateria zaharrak eta berriak edo bateria mota desberdinak.
• Bota ezazu erabilitako bateriak arduraz tokiko araudiaren arabera.
• Keep the device away from strong magnetic fields or electrical interference sources.

Paketearen edukia

• BAR206 Main Unit (White)
• Wireless Remote Temperature Sensor (THN132N)
• Argibide eskuliburua (dokumentu hau)

Note: Batteries are not included and must be purchased separately (3x AA for main unit, 1x AA for remote sensor).

Produktua amaituview

Main Unit (BAR206)

The main unit features a large LCD display showing various weather data and time. Below the display are control buttons for settings and functions.

• LCD pantaila: Shows outdoor/indoor temperature, indoor humidity, weather forecast, moon phase, time, and date.
• MODE botoia: Toggles between display modes and enters setup.
• ARGI botoia: Activates the backlight for temporary illumination.
• MEM botoia: Displays daily high/low temperature and humidity records.
• GORA (▲) / BEHERA (▼) botoiak: Adjust values during setup or toggle display options.
• Ice Alert LED: Flashes green when outdoor temperature approaches freezing.

Wireless Remote Temperature Sensor (THN132N)

The compact wireless sensor transmits outdoor temperature data to the main unit. It is designed for outdoor placement but should be protected from direct weather elements.

• Tenperatura-sentsorea: Measures ambient outdoor temperature.
• Kanal-aldaketa: Allows selection of one of three channels (1, 2, or 3) for multi-sensor setups.
• Berrezarri botoia: Resets the sensor and initiates re-synchronization.

Konfigurazioa

1. Bateriaren instalazioa

1. For the Wireless Sensor:
   • Ireki bateriaren konpartimenduaren estalkia.
   • Set the channel switch (1, 2, or 3). Ensure this channel matches the one selected on the main unit for outdoor readings.
   • Insert 1 AA battery, observing the correct polarity (+ and -).
   • Itxi bateriaren konpartimenduaren estalkia ondo.
2. Unitate Nagusirako:
   • Ireki bateriaren konpartimentuaren estalkia atzealdean.
   • Insert 3 AA batteries, observing the correct polarity (+ and -).
   • Close the battery compartment cover. The unit will power on and begin searching for the atomic clock signal and the wireless sensor.

2. Sentsoreak jartzea

Place the wireless sensor outdoors in a location that is sheltered from direct sunlight and precipitation. This ensures accurate temperature readings and prolongs the sensor's lifespan. Avoid placing it near large metal objects, electrical appliances, or sources of heat/cold that could interfere with readings or signal transmission. The maximum transmission range is 98 feet (unobstructed).

3. Hasierako sinkronizazioa

After installing batteries in both units, the main unit will automatically attempt to connect with the wireless sensor. This may take a few minutes. Ensure both units are within range. If the outdoor temperature does not appear, press the [RESET] button on the sensor and then the [MODE] button on the main unit to initiate a new search.

4. Time and Unit Settings

The BAR206 automatically synchronizes with the US Atomic Clock signal for accurate time. If manual adjustment is needed or preferred:

1. Press and hold the [MODE] button for 3 seconds to enter setup mode.
2. The first setting to adjust is the Time Zone. Use the [UP] or [DOWN] buttons to select your time zone.
3. Press [MODE] to confirm and move to the next setting (e.g., 12/24 hour format, hour, minute, year, month, day, temperature unit °C/°F).
4. Use [UP] or [DOWN] to adjust values and [MODE] to confirm each setting.
5. Press [MODE] repeatedly or wait 30 seconds for the unit to exit setup mode automatically.

Funtzionamendua

Bistaratu informazioa

• Outdoor Temperature (OUT TEMP): Current temperature from the wireless sensor.
• Indoor Temperature (IN TEMP): Current temperature measured by the main unit.
• Indoor Humidity (HUMIDITY): Current humidity level measured by the main unit.
• Weather Forecast Icon: Predicts weather for the next 12-24 hours (Sunny, Partly Cloudy, Cloudy, Rainy, Snowy).
• Ilargiaren fasea: Ilargiaren uneko fasea erakusten du.
• Atomic Clock Time: Automatically synchronized time and date.
• Ice Alert Icon: Indicates when outdoor temperature is near freezing.

Botoiaren funtzioak

Izotz Alerta

The Ice Alert feature provides an early warning when outdoor temperatures drop to near freezing (typically between 3°C and -2°C or 37.4°F and 28.4°F). The green LED light on the main unit will flash, and an ice crystal icon may appear on the display, indicating potential icy conditions.

Daily Hi/Lo Memory

The unit automatically records the highest and lowest indoor/outdoor temperatures and indoor humidity for the past 24 hours. Press the [MEM] button to cycle through these records. Press [MEM] again to clear the records and start a new 24-hour cycle.

Multiple Sensor Channels

The BAR206 main unit can receive data from up to three wireless sensors. If you have additional sensors (sold separately), set each to a different channel (1, 2, or 3). Use the [UP] button on the main unit to cycle through the outdoor temperature readings from each connected sensor.

Mantentzea

Bateria ordezkatzea

When the battery low indicator appears on the display for either the main unit or the sensor, replace the batteries promptly. Follow the battery installation steps outlined in the Setup section. It is recommended to replace all batteries at the same time to ensure consistent performance.

Garbiketa

Garbitu unitatea leuna batekinamp cloth. Do not use abrasive materials or corrosive cleaners, as these may scratch the display or damage the casing. Ensure the unit is dry before re-inserting batteries or operating.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

For warranty information, technical support, or to purchase additional accessories, please visit the official Oregon Scientific webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa, berme-erreklamazioetarako.