AIBOO YK-300000197

AIBOO Linkable Under Cabinet LED Lighting System User Manual

Model: YK-300000197

1. Sarrera

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting System. This system features hardwired 12V slim aluminum dimmable puck lights with a wireless controller, designed for ambiance lighting in various indoor settings. Please read this manual thoroughly before installation and use.

2. Segurtasun informazio garrantzitsua

Segurtasun elektrikoa: This product is designed for 110V/120Vac input and requires hardwiring. Installation should be performed by a qualified electrician or an individual with intermediate knowledge of electrical wiring to prevent electric shock or fire hazards. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
No Wall Plug: This system does NOT include a wall plug power adapter. It is intended for direct wiring into your electrical system.
Barruko erabilera soilik: This lighting system is designed for indoor use in dry locations. Do not expose to moisture or water.
Aireztapena: Ensure adequate ventilation around the LED driver to prevent overheating.
Osagaien bateragarritasuna: Use only the components provided or specified by AIBOO. Using incompatible parts may damage the system or pose a safety risk.

3. Paketearen edukia

Egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:

LED Puck Lights (6 units)
RF Wireless Remote Control (1 unit)
LED Controller (1 unit)
12V 1A Hardwired LED Driver (Power Adapter) (1 unit)
5ft Extension Cords (2 units)
6-Way Splitter (1 unit)
Mounting Stickers (12 units)
Muntatzeko torlojuak (12 unitate)

Contents of the AIBOO Linkable Under Cabinet LED Lighting System package — **3.1 irudia: Paketearen edukia.** This image displays all components included in the AIBOO Linkable Under Cabinet LED Lighting System: six puck lights, a remote, a controller, a 12V 1A adapter, two 5ft extension cords, a 6-way splitter, 12 stickers, and 12 screws.

4. Produktuaren zehaztapenak

Marka	AIBOO
Modelo zenbakia	YK-300000197
Argi Kolorea	6000K eguneko argia zuria
Materiala	Metal (Puck Light Housing), Plastic (Shade)
Puck Light Dimensions	2.36"L x 2.36"Z x 0.31"A (6 cm x 6 cm x 0.8 cm)
Energia iturria	Corded Electric (Hardwired)
liburukiatage	12 Volts (DC output from driver)
Argi iturri mota	LED
Distira	1200 Lumens (Total for 6 lights)
Ezaugarri bereziak	Dimmable, Linkable, Remote Control
Kontrol-metodoa	RF Haririk gabeko Urruneko Kontrola
UPC	712411875756

Dimensions of the AIBOO LED puck lights and associated components — **4.1 irudia: Produktuaren neurriak.** This image illustrates the dimensions of the puck lights (2.3 inches diameter, 0.3 inches thick), cable lengths, and controller/driver sizes for planning installation.

5. Konfigurazioa eta instalazioa

Instalazioa hasi aurretik, ziurtatu instalazio-eremuko energia-hornidura nagusia etengailu magnetotermikoan itzalita dagoela.

5.1 Kableatu diagramaview

Overall wiring diagram for the AIBOO Linkable Under Cabinet LED Lighting System — **Figure 5.1: System Wiring Overview.** This diagram shows the connection flow from the hardwired LED driver to the LED controller, and then to the individual puck lights.

5.2 Hardwired Power Adapter Connection

The system includes a hardwired power adapter (LED Driver) designed to connect directly to a 110V/120Vac circuit. This adapter converts AC power to 12V DC for the LED lights. A wall plug is not included.

Itzali korrontea zirkuitu-etengailu nagusian.
Connect the input wires of the LED driver to your 110V/120Vac circuit wiring. Ensure proper polarity (live to live, neutral to neutral, ground to ground) according to local electrical codes.
Secure all connections with appropriate wire connectors.

5.3 Connecting the Puck Lights

The puck lights can be connected in two primary configurations: Series Connection or Parallel Connection.

5.3.1 Serie-konexioa

In a series connection, the puck lights are linked one after another. This method is suitable for linear installations where lights are spaced evenly in a line.

Diagram showing puck lights connected in a series configuration — **Figure 5.2: Series Connection.** Lights are connected sequentially, one after another, from the LED controller.

Connect the LED controller to the output of the hardwired LED driver.
Connect the first puck light to the LED controller.
Connect the subsequent puck lights to each other using their integrated cables.
Use extension cords if additional length is required between lights.

5.3.2 Konexio paraleloa

For installations requiring lights to branch out from a central point, the 6-way splitter allows for parallel connection.

Diagram showing puck lights connected in a parallel configuration using a 6-way splitter — **Figure 5.3: Parallel Connection.** Lights are connected to a central 6-way splitter, which then connects to the LED controller.

Connect the LED controller to the output of the hardwired LED driver.
Connect the 6-way splitter to the LED controller.
Connect individual puck lights to the available ports on the 6-way splitter.
Use extension cords if additional length is required for individual lights.

5.4 Mounting the Puck Lights

The puck lights can be mounted using either the provided screws or adhesive stickers.

Azalera prestatzea: Ziurtatu muntatzeko gainazala garbi, lehor eta leuna dela.
Itsasgarriaren muntaketa: Peel the backing from the adhesive sticker and firmly press the puck light onto the desired surface. Hold for 30 seconds to ensure a strong bond.
Torlojuen muntaketa: Use the provided screws to secure the puck lights to the surface. Pre-drilling pilot holes may be necessary depending on the material.

6. Funtzionamendu-argibideak

The AIBOO LED Lighting System is controlled by an RF wireless remote control.

6.1 Urruneko kontrolaren funtzioak

Diagram of the AIBOO remote control with button functions — **Figure 6.1: Remote Control Functions (New Version).** This image details the buttons on the remote control and their corresponding actions, including ON/OFF, brightness adjustment, pairing, and timer settings.

ON/OFF: Sakatu ON argiak pizteko botoia, eta OFF botoia sakatu haiek itzaltzeko.
Distira doitzea:
- Sakatu LIGHT + or LIGHT - to gradually increase or decrease brightness (stepless dimming).
- Erabili %100, %50, %25 buttons for quick brightness presets.
Parekatzea: To pair the remote with the controller, press the Bikoteka button within 5 seconds of powering on the lights until the lights flicker.
Decoding (1 to More Pair): To pair one remote with multiple controllers, press the Deskodetzea button within 5 seconds of powering on the lights until the lights flicker.
Denbora funtzioak: Sakatu 1H, 2H, 4H, edo 8H to set the lights to automatically turn off after 1, 2, 4, or 8 hours, respectively.

Detailed instruction for the AIBOO remote control functions — **Figure 6.2: Remote Control Detailed Instructions.** This image provides a clear breakdown of each button's function on the remote, including ON/OFF, brightness adjustment, pairing, and timing settings.

Visual representation of 10 levels of adjustable brightness for AIBOO LED puck lights — **Figure 6.3: Adjustable Brightness.** This image demonstrates the range of 10 adjustable brightness levels, from dim to full brightness, controlled by the remote.

7. Mantentzea

The AIBOO LED Lighting System requires minimal maintenance.

Garbiketa: Ensure the lights are off and cool before cleaning. Wipe the puck lights and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Ikuskapena: Periodically check all connections for tightness and inspect cables for any signs of damage.
Bateria ordezkatzea: The remote control requires 1 CR2 battery. Replace the battery when the remote's range decreases or it stops responding.

8. Arazoak

If you encounter issues with your AIBOO LED Lighting System, refer to the following common problems and solutions:

Arazoa	Kausa posiblea	Irtenbidea
Argiak ez dira pizten.	No power to the LED driver; Remote control battery is dead; Remote not paired; Loose connections.	Check circuit breaker. Replace remote battery. Re-pair remote (see Section 6.1). Verify all cable connections are secure.
Lights are flickering or strobing.	Too many lights connected to a single power supply; Faulty power supply.	Ensure no more than 6 lights are connected to one power supply. If flickering persists, inspect the power supply for signs of damage (e.g., warped casing, discoloration). A damaged power supply may need replacement.
Urruneko kontrolak ez du erantzuten.	Remote control battery is dead; Remote is out of range; Remote is not paired with the controller.	Replace the CR2 battery in the remote. Move closer to the LED controller. Re-pair the remote with the controller (see Section 6.1).
Lights do not dim or respond to brightness controls.	Remote not paired correctly; Controller malfunction.	Re-pair the remote (see Section 6.1). If the issue persists, contact customer support.

9. Bermearen informazioa

AIBOO products are manufactured to high-quality standards. For specific warranty details regarding your Linkable Under Cabinet LED Lighting System, please refer to the warranty card included with your purchase or visit the official AIBOO webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa, berme-erreklamazioetarako.

10. Bezeroarentzako arreta

For technical assistance, troubleshooting, or product inquiries, please contact AIBOO customer support.

U.S. Live Customer Support: Monday - Friday, 9 AM - 5 PM (EST)
Sareko baliabideak: Bisitatu AIBOO Store on Amazon produktuari buruzko informazio eta laguntza gehigarria lortzeko.

Illustration of customer support representatives with contact icons — **Figure 10.1: Customer Support.** This image represents the availability of customer support for assistance with product-related queries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.