YATOUR BTA-TOY2 Bluetooth Car Adapter Instruction Manual

Sarrera

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your YATOUR BTA-TOY2 Bluetooth Car Adapter. This device integrates Bluetooth audio streaming, auxiliary input, and USB charging capabilities into your vehicle's factory stereo system, utilizing the original CD changer port. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Image 1: YATOUR BTA-TOY2 Bluetooth Car Adapter, showing the main unit, connection cables, and external microphone.

Segurtasun Informazioa

To prevent damage to the device or your vehicle, and to ensure safe operation, observe the following safety guidelines:

• Instalazioa hasi aurretik, ziurtatu ibilgailuaren piztea itzalita dagoela eta bateria deskonektatuta dagoela.
• Properly connect the adapter to the CD changer port. Incorrect connections can lead to malfunction or damage.
• Use only the appropriate cables for your vehicle model to avoid electrical issues.
• Route cables securely to prevent interference with vehicle controls or moving parts.
• Do not attempt to disassemble or modify the adapter. This will void the warranty and may cause damage.
• Consult a professional installer if you are unsure about any step of the installation process.

Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• YATOUR BTA-TOY2 Bluetooth Car Adapter Unit
• Vehicle-specific 6+6PIN CDC Connector Cable
• 3.5mm AUX Input Cable
• Kanpoko Mikrofonoa
• Erabiltzailearen eskuliburua (dokumentu hau)

Bateragarritasuna

The YATOUR BTA-TOY2 adapter is designed for specific Toyota and Lexus vehicles equipped with 6+6PIN CDC (CD Changer) ports. Please confirm your vehicle and radio model are listed below before installation.

Lexus modelo bateragarriak:

• ES300/330/350 (2004-2011)
• GS300/400/430/450h (2006-2011)
• GX470 (2004-2009)
• IS200/250/300/350 (2006-2011)
• LS460 (2007-2011)
• LX470 (2004-2007)
• LX570 (2008-2011)
• SC430 (2005-2010)

Toyota modelo bateragarriak:

• 4Runner (2003-2011)
• Avalon (2005-2011)
• Avensis (2003-2011)
• Auris (2007+)
• Camry (2005-2011)
• Celica (2003-2005)
• Corolla/Verso (2005-2011)
• FJ Cruiser (2007-2011)
• Fortuner (2004-2011)
• Hiace (2003-2011)
• Highlander (2004-2011)
• Hilux (2003-2011)
• Land Cruiser (2003-2011)
• Mark X (2005-2011)
• Matrix (2005-2011)
• MR2 (2004-2010)
• Picnic (2003-2010)
• Prius (2004-2011)
• RAV4 (2003-2012)
• Reiz (2003-2010)
• Sequoia (2005-2011)
• Sienna/Previa (2004-2010)
• Solara (2004-2008)
• Tacoma (2005-2011)
• Tundra (2004-2011)
• Venza (2009-2011)
• Vios (2003-2011)
• Vitz (2006-2010)
• Yaris (2006-2011)

Compatible OEM Radios (by Panasonic and Matsushita):

11816, 11817, 11828, 16852, 12821, 13803, 13829, 16852, 17006, 17828, 50323, 51825, 53816, 53818, 58814, 58816, 58827, P1500, P1714 (supports one folder only, on Lexus RX300), P1733, P1740, P1750 (LX470), P1754, P3745 (Land Cruiser), P3803, P3914 (Prado), P3916, P3918, P3919, P3926, P3930, P3946, P6827, P7514, P7809, P7820, Q58816, A56828, A56829, AP6829, AP6860, W13830, W53822, W53900, W53901, W53903, W53905, W58810, W58814, W58831, B9002 Navigation System, ND3T-W55 (36052) Navigation radio (Mark X, not need y cable), etc.

Ohar garrantzitsuak:

• If the CD changer port is already in use by an existing CD changer, an additional MP3/CDC Switch Cable may be required to combine the YATOUR adapter with the CD changer.
• A Splitter/Y cable is necessary if the CD changer port is occupied by a navigation system.

Konfigurazioa eta Instalazioa

Installation typically involves connecting the adapter to the vehicle's factory stereo CD changer port. Professional installation is recommended if you are unfamiliar with car audio system wiring.

1. Ibilgailua prestatu: Turn off the vehicle's ignition and disconnect the negative terminal of the car battery to prevent electrical shorts.
2. Access the Stereo: Carefully remove the car stereo unit from the dashboard to access the rear ports. Refer to your vehicle's service manual for specific instructions on stereo removal.
3. Locate CD Changer Port: Identify the 6+6PIN CD changer port on the back of your factory stereo. This is where the YATOUR adapter will connect.
   

   2 irudia: Adibideaample of a 6+6PIN CDC connector, which plugs into the car stereo.

4. Konektatu egokitzailea: Plug the vehicle-specific 6+6PIN CDC connector cable from the YATOUR adapter into the corresponding port on the car stereo. Ensure a secure connection.
   

   Image 3: The main connection cable, showing the adapter-side connector and the vehicle-side 6+6PIN connector.
5. Mikrofonoa konektatu (aukerakoa): If using the hands-free calling feature, connect the external microphone to the designated port on the YATOUR adapter. Route the microphone cable to a suitable location, such as near the rearview mirror or on the A-pillar, for optimal voice pickup.
6. Route Cables and Secure Adapter: Carefully route all cables to avoid pinching or interference. Secure the YATOUR adapter unit in a safe, dry location behind the dashboard or in the glove compartment, away from heat and moisture.
7. Reassemble Stereo: Reinstall the car stereo unit into the dashboard.
8. Berriro konektatu bateria: Berriro konektatu autoaren bateriaren terminal negatiboa.
9. Proba funtzionaltasuna: Turn on the vehicle and stereo to test the adapter's functions.

Funtzionamendu-argibideak

Activating the Adapter:

After installation, turn on your car stereo. Select the CD changer mode (often labeled "CD," "CDC," or "AUX") on your car stereo. The YATOUR adapter will now be active.

Bluetooth bidezko lotura

1. Ensure the YATOUR adapter is active (CD changer mode selected).
2. Zure gailu mugikorrean, gaitu Bluetootha eta bilatu eskuragarri dauden gailuak.
3. Select "YATOUR" or a similar identifier from the list of devices.
4. Once paired, your device will connect automatically when the adapter is active.

Bluetooth audio erreprodukzioa:

• Play audio from your paired mobile device. Sound will be routed through your car's speakers.
• Control playback (play/pause, next/previous track) using your car stereo buttons or steering wheel controls (if supported by your vehicle and stereo).

AUX sarrera:

• Connect any external audio source (e.g., MP3 player, portable CD player) to the 3.5mm AUX input port on the YATOUR adapter using the provided AUX cable.
• The adapter will automatically switch to AUX mode when a device is connected to the AUX port.

USB kargatzea:

• The adapter features a 5V/1A USB port for charging mobile devices.
• Oharra: This USB port is for charging only and does not support music playback from USB storage devices.

Mantentzea

The YATOUR BTA-TOY2 adapter requires minimal maintenance. Follow these guidelines to ensure longevity:

• Keep the adapter unit and connections dry and free from dust.
• Saihestu unitatea tenperatura altuen edo eguzki-argiaren eraginpean denbora luzez jartzea.
• Do not use harsh chemicals or abrasive cleaners on the unit. A soft, dry cloth is sufficient for cleaning.
• Ensure all cables are securely connected and not under tension.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

YATOUR products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided at the point of purchase or visit the official YATOUR webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.