DEWALT DCD771C2 Drill Driver and DCS391B Circular Saw Kit Instruction Manual

Sarrera

This manual provides essential information for the safe and effective use of your DEWALT DCD771C2 20V MAX Cordless Lithium-Ion 1/2 inch Compact Drill Driver and DCS391B 20-Volt MAX Li-Ion Circular Saw Kit. Please read and understand all instructions before operating these tools. Keep this manual for future reference.

Segurtasun Jarraibide Orokorrak

OHARRA: Irakurri tresna elektriko honekin emandako segurtasun-abisu, argibide, ilustrazio eta zehaztapen guztiak. Behean zerrendatzen diren argibide guztiak ez betetzeak deskarga elektrikoa, sutea edo/edo lesio larriak eragin ditzake.

Lan Eremuko Segurtasuna

• Mantendu lan-eremua garbi eta ondo argiztatuta. Eremu nahasiak edo ilunek istripuak gonbidatzen dituzte.
• Ez erabili tresna elektrikoak atmosfera lehergarrietan, adibidez, likido sukoiak, gasak edo hautsak daudenean. Erreminta elektrikoek hautsa edo keak piztu ditzaketen txinpartak sortzen dituzte.
• Mantendu haurrak eta ingurukoak urrun, erreminta elektrikoa erabiltzen duzun bitartean. Distrakzioek kontrola galtzea eragin dezakete.

Segurtasun Elektrikoa

• Erreminten entxufeak entxufearekin bat etorri behar dira. Inoiz ez aldatu entxufea inola ere.
• Saihestu gorputzaren kontaktua lurrarekin edo lurretik loturiko gainazalekin, hala nola hodiekin, erradiadoreekin, sukaldeekin eta hozkailuekin. Deskarga elektrikoa jasateko arriskua areagotu egiten da zure gorputza lurrarekin edo lurrarekin lotuta badago.
• Ez jarri tresna elektrikoak euria edo hezetasunera. Erreminta elektriko batean sartzeak deskarga elektrikoaren arriskua areagotuko du.

Segurtasun pertsonala

• Egon adi, ikusi zer egiten ari zaren eta erabili zentzua erreminta elektrikoa ustiatzean. Ez erabili tresna elektrikorik nekatuta edo drogen, alkoholaren edo botiken eraginpean zauden bitartean.
• Erabili norberaren babeserako ekipoak. Erabili beti begi-babesak. Baldintza egokietarako erabiltzen diren babes-ekipoek, esaterako, hauts-maskara, irristagaitza ez duten segurtasun-oinetakoak, txano gogorrak edo entzumen-babesak kalte pertsonalak murriztuko dituzte.
• Saihestu nahi gabeko abiarazteak. Ziurtatu etengailua itzalita dagoela bateria-paketeari konektatu, tresna jaso edo eraman aurretik.

Produktuaren osagaiak

Your kit includes the following main components:

• DEWALT DCD771C2 20V MAX Cordless Lithium-Ion 1/2 inch Compact Drill Driver
• DEWALT DCS391B 20V MAX Li-Ion Circular Saw
• 20V MAX Lithium-Ion Battery
• Bateria kargagailua

DEWALT DCD771C2 20V MAX Cordless Drill Driver

Image: The DEWALT DCD771C2 20V MAX Cordless Drill Driver, featuring its yellow and black design, chuck, and battery connection point.

This compact drill driver is designed for a wide range of drilling and fastening applications. It features a 1/2 inch chuck and a two-speed transmission for versatility.

DEWALT DCS391B 20V MAX Circular Saw

Image: The DEWALT DCS391B 20V MAX Circular Saw, showing its blade, handle, and magnesium shoe.

The circular saw is engineered for demanding cutting tasks, offering a powerful motor and a durable magnesium shoe for accurate cuts. It supports a 0-50 degree bevel capacity.

Konfigurazioa eta Muntaketa

Bateria kargatzea eta instalatzea

1. Bateria kargatzea: Connect the charger to a standard power outlet. Slide the battery pack onto the charger until it clicks into place. The charger indicator light will show the charging status. Ensure the battery is fully charged before first use.
2. Bateria instalatzea: Align the battery pack with the battery port on the tool handle. Slide the battery into the tool until it locks securely.
3. Bateria kentzea: Sakatu bateria askatzeko botoia eta atera bateria-paketea tresnatik.

Drill Driver Setup

1. Opening the Chuck: Rotate the chuck counter-clockwise until the jaws are wide enough to accept the drill bit or accessory.
2. Installing a Bit: Insert the desired drill bit or accessory into the chuck. Ensure it is centered.
3. Tightening the Chuck: Rotate the chuck clockwise until the bit is firmly secured. Hand-tighten for best grip.

Image: A user operating the DEWALT DCD771C2 Drill Driver to fasten a screw into a wooden surface.

Circular Saw Setup

1. Blade instalazioa: Ensure the tool is disconnected from the battery. Press the spindle lock button and use the provided wrench to loosen the blade bolt. Place the blade onto the arbor with the teeth pointing in the direction of rotation (usually indicated by an arrow on the blade and tool). Re-tighten the blade bolt securely.
2. Ebaketa-sakonera doitzea: Loosen the depth adjustment lever. Move the shoe up or down to set the desired cutting depth. Ensure the blade extends approximately 1/8 inch (3mm) below the workpiece. Tighten the lever.
3. Bevel angelua doitzea: Loosen the bevel adjustment lever. Tilt the shoe to the desired angle (0-50 degrees). Tighten the lever.

Funtzionamendua

Drill Driver Operation

1. Abiadura aukeraketa: Use the speed selector switch located on top of the tool to choose between high speed (2) for drilling and low speed (1) for fastening or larger diameter drilling.
2. Forward/Reverse Control: The forward/reverse button near the trigger controls the direction of rotation. Push left for forward, right for reverse, and center for lock-off.
3. Operating the Trigger: Squeeze the trigger to start the tool. Variable speed is controlled by the amount of trigger depression.
4. Zulaketa: Apply steady, even pressure. For hard materials, use slower speeds.

Circular Saw Operation

1. Zerra martxan jartzea: Ziurtatu pieza ondo dagoela clamped. Depress the trigger lock-off button, then squeeze the trigger to start the saw. Allow the blade to reach full speed before contacting the workpiece.
2. Ebaki bat egitea: Guide the saw along the cutting line, maintaining a firm grip. Do not force the saw; let the blade do the work. Keep both hands on the tool handles during operation.
3. Segurtasun neurriak: Always ensure the lower blade guard operates freely. Never tie or wedge the guard in the open position. Avoid cutting small pieces that cannot be securely held.

Image: A user operating the DEWALT DCS391B Circular Saw to cut a sheet of plywood.

Mantentzea

Mantentze-lan erregularrak errendimendu optimoa bermatzen du eta zure tresnen bizitza luzatzen du.

• Garbiketa: Keep the tool's ventilation openings clear of dust and debris. Use a soft brush or compressed air to clean the tool. Do not use water or chemical cleaners.
• Blade Care (Circular Saw): Regularly inspect the saw blade for sharpness and damage. Replace dull or damaged blades promptly. Ensure the blade is clean and free of resin buildup.
• Bateria zaintzea: Gorde bateriak leku fresko eta lehor batean, eguzki-argitik babestuta. Ez gorde bateriak deskargatuta denbora luzez.
• Ikuskapena: Periodically check all screws and fasteners for tightness. Inspect cords and connections for damage.

Arazoak konpontzea

Zehaztapenak

• Marka: DEWALT
• Energia iturria: Battery Powered (20V MAX Lithium-Ion)
• Drill Driver (DCD771C2):
  • Maximum Chuck Size: 0.5 inches
  • Number of Speeds: 2 (0-450 RPM / 0-1500 RPM)
  • Maximum Power: 300 Unit Watts Out (UWO)
  • Drilling Capacity (Wood/Metal): 0.5 inches
• Circular Saw (DCS391B):
  • Gehienezko biraketa-abiadura: 5150 RPM
  • Maximum Power: 460 MWO
  • Alaka Edukiera: 0-50 gradu
  • Shoe Material: Magnesium
• Modelo zenbakiak: DCD771C2 (Drill Driver), DCS391B (Circular Saw)
• Material mota: Metal With Magnesium And Plastic Components

Bermea eta Laguntza

Bermeari, zerbitzuari edo laguntza teknikoari buruzko informazioa lortzeko, jo ezazu DEWALT-en webgune ofizialera. website or contact DEWALT customer service. Keep your purchase receipt as proof of purchase.

DEWALT-en harremanetarako informazioa:

• Webgunea: www.dewalt.com
• Kontsultatu produktuaren ontzia edo agiria website for specific regional contact numbers.