Sarrera
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Essential III Beatles Turntable. Please read this manual carefully before using the product to ensure proper function and longevity.
Paketearen edukia
Hasi aurretik, egiaztatu behean zerrendatutako elementu guztiak zure paketean daudela:
- Ortofon OM10 Phono Cartridge
- 15 V DC Universal Power Supply
- Hinged Acrylic Dust Cover
- Connect It E Audio Cable
- 7" 45 RPM Adaptor
Image: The Pro-Ject Essential III Beatles Turntable, showcasing its unique design and components.
Konfigurazioa
Follow these steps to set up your turntable for optimal performance:
- Despaketatzea: Kontu handiz atera osagai guztiak ontzitik. Gorde ontzia etorkizunean garraiatzeko edo biltegiratzeko.
- Lekua: Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation.
- Plateraren instalazioa: Gently place the acrylic platter onto the spindle. Ensure it sits flush.
- Gerrikoa instalatzea: Carefully loop the silicone drive belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.
- Cartridge Alignment (Pre-mounted): The Ortofon OM10 cartridge comes pre-mounted. Verify it is securely attached to the tonearm.
- Tonearm Balance: Adjust the counterweight at the rear of the tonearm until the tonearm floats freely and horizontally. Then, set the tracking force according to the cartridge manufacturer's specifications (typically 1.5g for Ortofon OM10).
- Anti-skating Adjustment: Attach the anti-skating weight to the designated groove on the tonearm support.
- Hauts-estalkia: Attach the hinged acrylic dust cover to the rear hinges of the turntable.
- Konexioak: Connect the Connect It E Audio Cable from the turntable's RCA outputs to your phono preamplifikatzailea edo amplifier's phono input. Connect the 15V DC universal power supply to the turntable and then to a power outlet.
Image: Detail of the motor pulley and belt drive system.
Image: The tonearm and pre-mounted Ortofon OM10 cartridge.
Funtzionamendu-argibideak
To play a record:
- Piztu: Flip the power switch located on the side of the plinth to the 'On' position. The platter will begin to spin.
- Hautatu Abiadura: The turntable supports 33 1/3 RPM and 45 RPM. To change speed, manually move the drive belt to the appropriate step on the motor pulley. Use the 7" 45 RPM adaptor for singles.
- Lekuaren erregistroa: Carefully place your vinyl record onto the platter.
- Igogailu besoa: Erabili besoa altxatzeko palanka besoa altxatzeko.
- Estiletearen posizioa: Mugitu besoa astiro-astiro diskoaren hasierako ildoaren gainetik.
- Beheko besoa: Slowly lower the tonearm using the lift lever. The stylus will descend onto the record, and playback will begin.
- Erreprodukzioaren amaiera: At the end of the record, use the tonearm lift lever to raise the tonearm, then return it to its rest. Flip the power switch to 'Off'.
Image: Power switch location on the turntable plinth.
Mantentzea
Regular maintenance ensures the longevity and optimal performance of your turntable:
- Hauts-estalkia: Always use the dust cover when the turntable is not in use to protect it from dust and debris.
- Cleaning the Plinth: Wipe the plinth with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
- Estiletoa garbitzea: Use a dedicated stylus brush or cleaning fluid to gently clean the stylus before or after each play. Brush from back to front.
- Garbiketa Erregistroak: Keep your records clean using a record brush or a record cleaning machine to prevent dust from accumulating on the stylus.
- Gerriko ikuskapena: Periodically inspect the drive belt for wear or stretching. Replace if necessary.
Arazoak konpontzea
Zure biragailuarekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| No power / Turntable not spinning | Kablea deskonektatuta; Entxufea akastuna; Etengailua itzalita. | Check power connections; Try a different outlet; Ensure power switch is 'On'. |
| Soinurik ez edo soinu oso baxua | Sarrera okerra hautatu da amplifier; Cartridge not connected properly; Amplifier volume too low; No phono preampbiziagoa. | Select correct input (Phono); Check cartridge wiring; Increase volume; Ensure a phono preamplifier is used if your amplifier lacks one. |
| Distorted sound / Skipping | Stylus dirty or worn; Tracking force incorrect; Anti-skating incorrect; Record dirty or damaged. | Clean stylus; Re-adjust tracking force and anti-skating; Clean or replace record. |
| Burrunba zarata | Ground wire not connected; Interference from other electronics. | Ensure ground wire is connected to amplifier's ground terminal; Move turntable away from other electronics. |
| Speed inconsistency | Drive belt worn or improperly seated; Motor issue. | Check and re-seat drive belt; Replace belt if worn. If problem persists, contact support. |
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Ereduaren izena | Essential III Sgt. Pepper |
| Marka | Proiektua |
| Neurriak (L x W x H) | 12.99 x 16.54 x 4.41 hazbete |
| Elementuaren pisua | 11 libra (gutxi gorabehera 5 kg) |
| Konektibitate Teknologia | RCA |
| Materiala | Egur landua, plastikoa |
| Drive Sistema | Gerriaren transmisioa motor sinkronoarekin eta silikonazko gerrikoarekin |
| platter | Acrylic (Acryl it E upgrade) |
| Tonu-besoa | 8.6" Aluminium Tonearm |
| Kartutxoa | Pre-mounted Ortofon OM10 |
| Modu aktiboan energia-kontsumoa | 4.5 watt |
Bermea eta Laguntza
For warranty information and technical support, please refer to the official Pro-Ject Audio Systems webwebgunera edo jarri harremanetan zure baimendutako saltzailearekin. Gorde erosketaren frogagiria bermearen erreklamazioetarako.
Fabrikatzailea: Pro-Ject Audio Sistemak
Lehenengo eskuragarri: 31ko maiatzaren 2017a
Itzultzeko politika: 30-day refund/replacement (as per Amazon's policy at time of data retrieval).
Laguntza gehiago lortzeko, bisitatu Pro-Ject Store on Amazon.