Flexispot EB2B Electric Height-Adjustable Desk Frame User Manual

1. Sarrera

Thank you for choosing the Flexispot EB2B Electric Height-Adjustable Desk Frame. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk frame. Please read this manual thoroughly before installation and keep it for future reference.

Image: The Flexispot EB2B desk frame supporting a complete desk setup, highlighting its dual-motor design.

2. Segurtasun informazioa

Funtzionamendu segurua bermatzeko eta kalteak saihesteko, jarraitu segurtasun neurri hauek:

• Ziurtatu osagai guztiak ondo lotuta daudela erabili aurretik.
• Ez gainditu 100 kg-ko (220 lb) gehienezko pisu-ahalmena.
• Keep children and pets away from the desk during operation to prevent injury from moving parts.
• Ensure there are no obstructions in the desk's path when adjusting height. The anti-collision system is designed to prevent damage, but manual vigilance is always recommended.
• Do not disassemble or modify the desk frame or its electrical components. Contact qualified personnel for repairs.
• Deskonektatu korrontea garbiketa edo mantentze-lanak egin aurretik.

Image: Visual representation of the anti-collision system, showing the desk rebounding upon detecting an obstruction.

3. Paketearen edukia

Mesedez, egiaztatu pieza guztiak daudela muntaketa hasi aurretik:

• Mahaiaren hankak (2)
• Oinak (2)
• Gurutza (1)
• Alboko euskarriak (2)
• Kontrol-kutxa (1)
• Handset/Control Panel (1)
• Korronte egokitzailea (1)
• Elikatze kablea (1)
• Cable Management Clips (4)
• Assembly Hardware (screws, Allen keys, etc.)

Image: All main components of the Flexispot EB2B desk frame, including the dual legs, crossbar, and control panel.

4. Konfigurazioa eta Muntaketa

Follow these steps to assemble your Flexispot EB2B desk frame. It is recommended to have two people for assembly.

1. Eremua prestatu: Clear a spacious area for assembly. Lay down a soft cloth or cardboard to protect the desk frame and your floor.
2. Oinak hanketara lotu: Securely attach the feet to the bottom of each desk leg using the provided screws.
3. Assemble the Crossbar: Connect the two desk legs to the adjustable crossbar. Ensure the crossbar is extended to the desired width to accommodate your tabletop (Min: 110cm, Max: 180cm).
4. Alboko euskarriak instalatu: Attach the side brackets to the top of the desk legs, which will support your tabletop.
5. Kontrol-kutxa muntatu: Secure the control box to the designated area under the crossbar.
6. Konektatu kableak: Connect the motor cables from each leg to the control box. Connect the handset cable to the control box. Finally, connect the power adapter to the control box and the power cord to the adapter.
7. Mahaigaina erantsi: Carefully place your tabletop (not included) onto the assembled frame. Ensure it is centered and aligned. Secure the tabletop to the frame using appropriate screws (ensure screws are not too long to penetrate the tabletop surface). The frame is compatible with tabletops from 110 cm to 180 cm wide and 50 cm to 80 cm deep.
8. Kableen kudeaketa: Use the provided cable management clips to organize and secure all cables, preventing them from dangling or getting caught.

Image: A diagram illustrating the adaptable desktop sizes (width and depth) that the Flexispot EB2B desk frame can accommodate.

5. Funtzionamendu-argibideak

The Flexispot EB2B features a user-friendly control panel for height adjustment and memory functions.

5.1. Oinarrizko altuera doikuntza

• Mahaia altxatu: Eduki sakatuta UP (^) button to raise the desk to your desired height.
• Beheko mahaia: Eduki sakatuta DOWN (v) button to lower the desk to your desired height.
• The LED display will show the current height in centimeters. The desk operates smoothly and quietly, with a noise level below 50 dB and a lifting speed of 3.2 cm/sec.

5.2. Memoria aurrezarpenak

The control panel allows you to save up to four preferred height settings.

1. Egokitu mahaia nahi duzun altuerara GORA/BEHERA botoiak erabiliz.
2. Sakatu M button (or 'S' depending on the model) followed by the desired preset number (1, 2, 3 edo 4). The display will show 'S-' then the number, indicating the height has been saved.
3. To recall a saved height, simply press the corresponding preset number (1, 2, 3 edo 4). Mahaia automatikoki mugituko da gordetako posiziora.

5.3. Sedentary Reminder System

The advanced control panel includes a sedentary reminder system to encourage healthy work habits. Consult your specific control panel's instructions for activating and setting reminder intervals.

5.4. Talkaren aurkako sistema

The desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage. You can adjust the sensitivity of this system (refer to the detailed control panel manual for specific steps).

Irudia: Xehetasun zehatza view of the control panel, showing the LED display, up/down buttons, and four memory preset buttons.

6. Mantentzea

Mantentze-lan erregularrak zure mahaiaren egituraren iraupena eta errendimendu optimoa bermatzen ditu.

• Garbiketa: Garbitu mahaiaren markoa zapi leun batekin,amp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the desk is unplugged before cleaning.
• Ikuskapena: Aldian-aldian egiaztatu torloju eta konexio guztiak ondo estututa daudela ziurtatzeko. Beharrezkoa bada, berriro estutu.
• Kablearen egiaztapena: Ziurtatu kable guztiak ondo konektatuta daudela eta kalterik gabe daudela.
• Lubrifikazioa: The lifting mechanism is designed for maintenance-free operation. Do not apply lubricants unless specifically instructed by Flexispot support.

7. Arazoak

If you encounter issues with your Flexispot EB2B desk frame, refer to the following common problems and solutions:

7.1. Berrezarri prozedura

If the desk is not functioning correctly, a reset may resolve the issue:

1. Eduki sakatuta DOWN (v) button until the desk reaches its lowest position and slightly rebounds. Continue holding for approximately 5-10 seconds until the display shows 'RST' or 'RESET'.
2. Release the button. The desk will then move slightly up and down to calibrate. Once the display shows the lowest height (e.g., 71.0), the reset is complete.

8. Zehaztapenak

Image: The Flexispot EB2B frame demonstrating its large height adjustment range (70-119 cm) and anti-collision feature.

9. Bermea eta Laguntza

Flexispot stands behind the quality of its products.

• Markoaren bermea: The desk frame is covered by a 5 urteko bermea.
• Motor and Controller Warranty: The motors and controllers are covered by a 3 urteko bermea.

For warranty claims, technical support, or any questions not covered in this manual, please contact Flexispot customer service through their official website or your point of purchase. Please have your model number (EB2B) and purchase information ready.

Image: Visual representation of the warranty terms: 5 years for the desk frame and 3 years for controllers and motors.