Ariete 2718 Xclean Robot Vacuum Cleaner User Manual

Sarrera

Thank you for choosing the Ariete 2718 Xclean Robot Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new robot vacuum. Please read this manual thoroughly before using the appliance and keep it for future reference.

Segurtasun-argibide garrantzitsuak

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using your robot vacuum cleaner:

• Irakurri argibide guztiak aparatua erabili aurretik.
• Tresna hau ez da gaitasun fisiko, sentsorial edo mental murriztua duten edo esperientzia eta ezagutza falta duten pertsonek (haurrak barne) erabiltzeko, baldin eta haien segurtasunaz arduratzen den pertsona batek gailuaren erabilerari buruz gainbegiratu edo jarraibiderik eman ez badu.
• Haurrak gainbegiratu behar dira aparatuarekin jolasten ez dutela ziurtatzeko.
• Do not operate the vacuum cleaner in areas with flammable or combustible liquids, such as gasoline, or in areas where they may be present.
• Ez hartu erretzen edo erretzen ari den ezer, hala nola zigarroak, pospoloak edo errauts beroak.
• Mantendu ilea, arropa solteak, atzamarrak eta gorputz-atal guztiak irekiguneetatik eta atal mugikorretatik urrun.
• Erabili eskuliburu honetan deskribatzen den moduan soilik. Erabili fabrikatzaileak gomendatutako eranskinak soilik.
• Ez erabili hondatutako kablearekin edo entxufearekin. Aparatuak behar bezala funtzionatzen ez badu, erori egin bada, hondatu, kanpoan utzi edo uretara erori bada, itzuli zerbitzu zentro batera.
• The robot is equipped with anti-fall sensors to prevent it from falling down stairs. However, always ensure the area around stairs is clear and well-lit for optimal sensor performance.

Paketearen edukia

Carefully unpack your robot vacuum cleaner and check that all items are present and in good condition. If any items are missing or damaged, please contact customer support.

• Ariete 2718 Xclean Robot Vacuum Cleaner
• Kargatzeko oinarria
• Elikatze-moldagailua
• Urruneko Kontrola
• Alboko eskuilak (2 bikote)
• HEPA iragazkia (aurrez instalatuta)
• Primary Filter (pre-installed)
• zakarrontzi
• Garbiketa eskuila

Image: All included accessories for the Ariete 2718 Xclean Robot Vacuum Cleaner, including the dustbin, side brushes, HEPA and primary filters, remote control, and a small cleaning brush.

Produktua amaituview

Ezagutu zure robot-xurgagailuaren osagai nagusiak.

Robot hutsa

• Main Body: Houses the motor, dustbin, and control electronics.
• Side Brushes: Sweep debris into the vacuum's path.
• Driving Wheels: Allow the robot to move across various surfaces.
• Universal Wheel: Provides directional movement.
• Dustbin: Collects dirt and debris.
• Control Panel/LCD Display: Shows status and allows manual operation.
• Charging Contacts: Connects with the charging base for power.
• Anti-Drop Sensors: Detects edges and stairs.
• Anti-Collision Sensors: Detects obstacles to prevent bumping.

Kargatzeko oinarria

• Charging Contacts: Connect with the robot's charging contacts.
• Power Indicator: Shows charging status.
• Power Port: Connects to the power adapter.

Konfigurazioa

1. Alboko eskuilak instalatzea

Align the side brushes with the corresponding posts on the bottom of the robot and press firmly until they click into place.

2. Positioning the Charging Base

Place the charging base against a wall in an open, uncluttered area. Ensure there is at least 1 meter (3 feet) of clear space on both sides and 2 meters (6 feet) in front of the charging base. Plug the power adapter into the charging base and then into a wall outlet.

3. Hasierako kargatzea

Place the robot vacuum onto the charging base, ensuring the charging contacts on the robot align with those on the base. The robot will begin charging automatically. For first-time use, charge the robot for approximately 5 hours until fully charged. A full charge provides up to 1.5 hours (90 minutes) of cleaning time.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner docked on its charging base, which is connected to a power outlet, indicating the charging process.

4. Garbiketa-eremua prestatzea

Before starting a cleaning cycle, remove any obstacles such as power cords, small rugs, toys, or other items that could entangle the robot or obstruct its path. The robot can navigate over low-pile carpets and hard floors.

Robotaren funtzionamendua

Piztu/Itzaltzea

To power on the robot, press the main power switch located on the side of the unit. The LCD display will illuminate. To power off, press the switch again.

Garbiketa ziklo bat abiaraztea

Press the 'CLEAN' button on the robot's control panel or the remote control to start an automatic cleaning cycle. The robot will begin cleaning and select the most appropriate mode for the area.

Image: A user's hand pressing the 'CLEAN' button on the top panel of the Ariete 2718 Xclean Robot Vacuum Cleaner to initiate a cleaning cycle.

Garbiketa moduak

The Ariete 2718 Xclean offers 6 cleaning modes, selectable via the remote control or the robot's control panel:

• Modu automatikoa: The robot cleans randomly, adjusting its path based on obstacles and room layout.
• Corners Mode: The robot focuses on cleaning along walls and in corners.
• Programazio modua: Allows you to set a delayed start time for cleaning.
• Along the Wall Mode: The robot follows walls to ensure edge-to-edge cleaning.
• Foku modua: The robot cleans a concentrated area in a spiral pattern, ideal for heavily soiled spots.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner actively cleaning a tiled floor in a living space, demonstrating its ability to navigate around furniture.

Urruneko agintea erabiliz

The remote control allows you to manually direct the robot, select cleaning modes, and initiate or pause cleaning cycles from a distance. Refer to the remote control diagram for button functions.

Delayed Start / Programming

To program a delayed start, use the 'PLAN' button on the robot or the remote control. You can set the robot to start cleaning after a specified number of hours. The robot does not have a real-time clock for daily scheduling, but rather a timer for delayed activation.

Automatic Return to Charging Base

When the battery level is low, the robot will automatically return to its charging base to recharge. Ensure the charging base is accessible and unobstructed.

Mantentzea

Mantentze-lan erregularrak zure robot-xurgagailuaren errendimendu optimoa bermatzen du eta bizitza luzatzen du.

1. Zaborrontzia hustea

The dustbin has a capacity of 300 ml and should be emptied after each cleaning cycle or when full. To empty:

1. Sakatu hautsontzia askatzeko botoia eta atera hautsontzia.
2. Open the dustbin lid and discard the collected debris.
3. Close the lid and reinsert the dustbin into the robot until it clicks into place.

Image: A hand demonstrating the removal of the dustbin from the Ariete 2718 Xclean Robot Vacuum Cleaner for emptying or cleaning.

2. Iragazkiak garbitzea

The robot uses a primary filter and a HEPA filter. These should be cleaned regularly to maintain suction power.

• Kendu zakarrontzia.
• Take out the primary filter and HEPA filter.
• Tap the filters gently to remove dust. Do not wash the HEPA filter with water. The primary filter can be rinsed with water if heavily soiled, but ensure it is completely dry before reinstallation.
• Berriro muntatu iragazkiak eta hauts-ontzia.

3. Alboko eskuilak garbitzea

Periodically check the side brushes for tangled hair or debris. Remove any obstructions by hand or using the provided cleaning brush. If brushes are worn, replace them with new ones.

4. Sentsoreak garbitzea

Wipe the anti-drop sensors (located on the bottom of the robot) and anti-collision sensors (located on the front bumper) with a clean, dry cloth to ensure they function correctly.

Image: The Ariete 2718 Xclean Robot Vacuum Cleaner approaching a staircase, illustrating the function of its anti-fall sensors to prevent accidental drops.

5. Bateria zaintzea

To prolong battery life, ensure the robot is regularly charged. If storing the robot for an extended period, fully charge it and then power it off. Recharge every 3 months to prevent deep discharge.

Arazoak konpontzea

Zure robot-xurgagailuarekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:

Zehaztapenak

Bermea eta Laguntza

Bermeari buruzko informazioa edo laguntza teknikoa lortzeko, kontsultatu zure produktuarekin batera datorren berme-txartela edo bisitatu Ariete-ren webgune ofiziala. website. Do not attempt to repair the appliance yourself, as this may void the warranty.