Tenda PH5 AV1000 Powerline Kit User Manual

1. Sarrera

The Tenda PH5 AV1000 Powerline Kit provides a high-speed network solution using your home's existing electrical wiring. This kit includes a Powerline Adapter (P3) and a Wi-Fi Powerline Extender (PA6), designed to eliminate Wi-Fi dead zones and extend your network coverage with speeds up to 1000 Mbps via powerline and 300 Mbps via Wi-Fi.

This manual provides instructions for setting up, operating, and maintaining your Tenda PH5 AV1000 Powerline Kit.

2. Paketearen edukia

Hasi aurretik, egiaztatu zure paketeak elementu hauek dituela:

• 1x Tenda PH5 AV1000 Powerline Adapter (P3)
• 1x Tenda PH5 AV1000 Wi-Fi Powerline Extender (PA6)
• 1x Ethernet kablea
• 1x Quick Installation Guide (this manual)

Image: Tenda PH5 AV1000 Powerline Kit showing both the wall-plugged adapter and the extender unit.

3. Konfiguratzeko argibideak

Follow these steps to set up your Tenda PH5 AV1000 Powerline Kit:

3.1. Hasierako konexioa

1. Connect the Powerline Adapter (P3): Plug the P3 adapter into a wall outlet near your internet router. Do not use a power strip or extension cord, as this can degrade performance.
2. Konektatu bideratzailera: Use the provided Ethernet cable to connect the P3 adapter to an available LAN port on your internet router.
3. Plug in the Wi-Fi Powerline Extender (PA6): Plug the PA6 extender into a wall outlet in the room where you need extended network coverage. Ensure it is also plugged directly into a wall outlet.
4. Adierazleak itxaron: Wait for the Powerline LED (house icon) on both devices to turn solid green, indicating a successful powerline connection. The Wi-Fi LED (Wi-Fi icon) on the PA6 should also turn solid green.

3.2. Wi-Fi Cloning (Optional)

The Wi-Fi cloning feature allows the PA6 extender to automatically copy your router's Wi-Fi name (SSID) and password, creating a seamless roaming network.

1. Sakatu WPS bideratzailean: Within two minutes of plugging in the PA6, press the WPS button on your main Wi-Fi router.
2. Press Wi-Fi Button on PA6: Immediately after pressing WPS on the router, press the Wi-Fi button on the PA6 extender.
3. Wait for Cloning: The Wi-Fi LED on the PA6 will flash during the cloning process and turn solid green once successful. Your PA6 will now broadcast a Wi-Fi network with the same name and password as your router.

Oharra: If your router does not have a WPS button, or if Wi-Fi cloning fails, you can manually configure the Wi-Fi settings via the Tenda web interface (refer to the Operating section).

4. Funtzionamendu-argibideak

4.1. Gailuak konektatzea

• Kable bidezko konexioa: The PA6 extender features two Gigabit Ethernet ports. You can connect devices such as Smart TVs, gaming consoles, or PCs directly to these ports using an Ethernet cable for a stable, high-speed wired connection.
• Haririk gabeko konexioa: Connect your Wi-Fi enabled devices (smartphones, tablets, laptops) to the Wi-Fi network broadcast by the PA6 extender. If you used Wi-Fi cloning, the network name and password will be the same as your main router. Otherwise, refer to the default Wi-Fi details provided on the device label or configure them manually.

4.2. LED adierazleak

The LED indicators provide information about the device status:

• Power LED (Power icon):
  • Berde finkoa: Gailua piztuta dago.
  • Itzalita: Gailua itzalita dago.
• Powerline LED (House icon):
  • Solid Green: Good powerline connection.
  • Solid Red: Weak powerline connection.
  • Off: No powerline connection.
• Wi-Fi LED (Wi-Fi icon - PA6 only):
  • Solid Green: Wi-Fi is active.
  • Flashing Green: Wi-Fi cloning in progress.
  • Desaktibatuta: Wi-Fi desgaituta dago.

Aholkua: If the Powerline LED on the PA6 is red, try plugging it into a different wall outlet to find a stronger connection point.

4.3. Web Kudeaketa interfazea

For advanced settings and configuration, you can access the web management interface of the PA6 extender:

1. Connect your computer to the PA6 extender either wirelessly or via an Ethernet cable.
2. Ireki a web browser and enter the default IP address (usually printed on the device label or found in the Quick Installation Guide).
3. Hasi saioa erabiltzaile-izen eta pasahitza lehenetsiekin (gailuaren etiketapean ere aurkitzen dira).
4. From here, you can change Wi-Fi settings, set Wi-Fi schedules, manage connected devices, and update firmware.

5. Mantentzea

• Garbiketa: Erabili zapi leun eta lehor bat gailuak garbitzeko. Ez erabili garbitzaile likido edo aerosolik.
• Lekua: Ensure the devices are placed in well-ventilated areas to prevent overheating. Avoid placing them near heat sources or in direct sunlight.
• Firmware eguneraketak: Aldian-aldian egiaztatu Tenda ofiziala website for firmware updates. Keeping your device's firmware up-to-date ensures optimal performance and security.
• Korronte-hartuneak: Always plug the powerline devices directly into a wall outlet. Avoid power strips, surge protectors, and extension cords, as they can interfere with powerline signal transmission.

6. Arazoak

6.1. No Powerline Connection (Powerline LED Off)

• Ensure both the P3 adapter and PA6 extender are plugged directly into wall outlets.
• Verify that the P3 adapter is connected to your router via an Ethernet cable.
• Try plugging both devices into outlets within the same electrical circuit. Powerline communication works best within the same circuit.
• If the issue persists, try resetting both devices to factory defaults (refer to the device's quick installation guide for reset instructions).

6.2. Slow Powerline Speed (Powerline LED Red)

• Relocate the PA6 extender to a different wall outlet. The signal quality can vary between outlets.
• Ensure no high-power electrical appliances (e.g., washing machines, refrigerators) are plugged into adjacent outlets or on the same circuit, as they can cause interference.
• Avoid using power strips or extension cords.

6.3. Wi-Fi Not Working on PA6

• Check if the Wi-Fi LED on the PA6 is solid green. If not, press the Wi-Fi button on the PA6 to enable Wi-Fi.
• If Wi-Fi cloning failed, access the web management interface to manually configure the Wi-Fi settings (SSID and password).
• Ensure the PA6 has a stable powerline connection (Powerline LED solid green).

7. Zehaztapenak

8. Bermea eta Laguntza

Bermea: This Tenda PH5 AV1000 Powerline Kit comes with a 2-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

Laguntza teknikoa: For technical assistance, troubleshooting, or further inquiries, please visit the official Tenda website or contact their customer support. Contact information can typically be found on the Tenda webgunean edo jatorrizko ontzian.

Sareko baliabideak: For the latest drivers, firmware updates, and additional support documentation, please visit: www.tendacn.com