DIODE LED SWITCHEX DI-24V-SE-100W Instruction Manual

1. Sarrera

The SWITCHEX Dimmer + Driver is an innovative solution that combines an LED dimmer switch and an LED power supply into a single, integrated unit. Designed for convenience and efficiency, this device accepts standard 120 VAC input and converts it to low voltage DC, all while fitting within a standard electrical box. It supports power options up to 100W, representing a significant advancement in the power and control of LED lighting applications. This integrated unit simplifies installations by providing both dimming control and power conversion in one compact device, eliminating common compatibility issues between separate drivers and switches. Each SWITCHEX unit includes three interchangeable face plate colors: glossy white, glossy light almond, and glossy brown, allowing for seamless integration with various interior decors.

2. Produktuaren ezaugarriak

• 100W Load Capacity: Supports up to 100W for 24V LED products, with a 120V input.
• Interchangeable Finishes: Comes with glossy white, glossy dark brown, and glossy light almond finishes to match various decors.
• Superior LED Dimming: Provides smooth dimming performance from 100% down to 5%.
• Preset Dimmer with On/Off Switch: Features a convenient preset dimmer function combined with an on/off switch for easy operation.
• Eliminates Compatibility Issues: Integrates the driver and switch into one unit, resolving common compatibility problems between separate components.

3. Paketearen edukia

Mesedez, egiaztatu osagai guztiak daudela instalazioa hasi aurretik:

• SWITCHEX Dimmer + Driver Unit (DI-24V-SE-100W)
• Glossy White Face Plate
• Glossy Light Almond Face Plate
• Glossy Brown Face Plate
• Instalazio Torlojuak

Image: The three included interchangeable face plates (white, light almond, and brown) for the SWITCHEX unit, allowing customization to match your decor.

4. Segurtasun informazioa

OHARRA: To avoid fire, shock, or death; turn off power at circuit breaker or fuse and test that power is off before wiring! This device is intended for installation in accordance with the National Electric Code and local regulations. It is recommended that a qualified electrician perform the installation.

• Do not use with non-dimmable LED fixtures or incandescent/fluorescent lights.
• Ziurtatu wat osoatage of connected LED fixtures does not exceed 100W.
• Zehaztutako bolumenaren barruan bakarrik funtzionatutage range (120 VAC input).
• Ez saiatu gailua konpontzen edo aldatzen. Mantendu mantentze-lan guztiak langile kualifikatuen esku.
• Mantendu ura eta hezetasunetik urrun.

5. Konfigurazioa eta instalazioa

The SWITCHEX unit is designed to fit into a standard single-gang electrical box. Follow these steps for proper installation:

1. Itzali energia: Locate the circuit breaker controlling the light fixture or outlet where you intend to install the SWITCHEX. Turn off the power completely at the main electrical panel. Verify power is off using a voltage probatzailea.
2. Prestatu kableatua: Remove the existing switch or cover plate from the electrical box. Carefully pull out the existing wiring.
3. Hari-konexioak:
   • Konektatu black (line) wire from the electrical box to the hari beltza on the SWITCHEX unit.
   • Konektatu kable zuria (neutroa) from the electrical box to the alanbre zuria on the SWITCHEX unit.
   • Konektatu green (ground) wire from the electrical box to the kable berdea on the SWITCHEX unit.
   • Konektatu bolumen baxuatage output wires (typically red/black or positive/negative) from the SWITCHEX unit to your 24V LED lighting fixture. Ensure correct polarity.
4. Unitatea muntatu: Carefully fold the wires and push the SWITCHEX unit into the electrical box. Secure it using the provided mounting screws.
5. Attach Face Plate: Choose your desired face plate (white, light almond, or brown) and snap it onto the SWITCHEX unit. Secure it with the small screws if applicable (trim plate not included).
6. Berrezarri boterea: Piztu berriro etengailuan.

Image: The SWITCHEX unit, demonstrating its compact design for in-wall installation, integrating both the LED driver and dimmer switch.

6. Funtzionamendu-argibideak

The SWITCHEX unit provides intuitive control over your LED lighting:

• Piztu/Desaktibatu kontrola: Press the bottom portion of the rocker switch to turn the lights ON or OFF.
• Iluntzeko kontrola: Use the vertical slider on the right side of the switch to adjust the brightness level. Slide up to increase brightness and slide down to decrease brightness.
• Aurrez ezarritako iluntze-maila: The dimmer will return to the last set brightness level when turned back on, if not fully off.

7. Mantentzea

The SWITCHEX Dimmer + Driver is designed for long-term, maintenance-free operation. Follow these simple guidelines:

• Garbiketa: To clean the surface of the switch, gently wipe with a soft, damp oihal. Ez erabili garbitzaile urratzailerik, disolbatzailerik edo produktu kimiko gogorrik, akabera kaltetu baitezakete.
• Erabiltzaileak ez du zerbitzurik gabeko piezarik: There are no user-serviceable parts inside the unit. Do not attempt to open or repair the device.
• Ingurumen-baldintzak: Ensure the operating environment remains within specified temperature and humidity ranges to prevent damage.

8. Arazoak

If you experience issues with your SWITCHEX unit, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Diode LED customer support for further assistance.

9. Zehaztapenak

10. Bermea eta Laguntza

For information regarding the product warranty, please refer to the official Diode LED website or contact their customer support directly. Diode LED is committed to providing high-quality products and excellent customer service.

Diode LED Customer Support:

• For technical assistance, troubleshooting, or warranty claims, please visit the Diode LED official webgunea edo jarri harremanetan haien laguntza-taldearekin, haien webgunean emandako harremanetarako informazioaren bidez.