Lepro 11-inch 24W Flush Mount LED Ceiling Light User Manual

1. Segurtasun informazioa

Mesedez, irakurri arretaz argibide guztiak instalatu eta erabili aurretik. Gorde eskuliburu hau etorkizunean erreferentzia gisa.

• Segurtasun elektrikoa: Always turn off the power at the circuit breaker before beginning any electrical work. Ensure proper grounding. If you are unsure about electrical installations, consult a qualified electrician.
• Barruko erabilera soilik: This fixture is designed for indoor use.
• Uraren erresistentzia: The light fixture has an IP54 water-resistant and dustproof rating, making it suitable for damp locations like bathrooms and kitchens. However, it is not designed for direct water immersion.
• Erregulagarria ez: This LED ceiling light is ez erregulagarria. Do not connect it to a dimmer switch, as this may damage the fixture.
• Beroa: While LED lights produce less heat than traditional bulbs, ensure adequate ventilation around the fixture.
• Haurrak: Keep packaging materials away from children to avoid danger of suffocation.

2. Produktua amaitu daview

The Lepro 11-inch Flush Mount LED Ceiling Light provides efficient and bright illumination for various indoor spaces. Its slim design integrates seamlessly with modern interiors.

• Eredua: PR1500035-WW
• Tamaina: 11 inches (28 cm) diameter, 1.97 inches (5 cm) height.
• Potentzia: 24 Watt
• Distira: 2400 lumen
• Kolore Tenperatura: 3000 Kelvin (Zuri bero leuna)
• Uraren erresistentzia: IP54 (iragazgaitza eta hautsaren aurkakoa)
• Bizi-iraupena: 20,000 ordu baino gehiago
• Materiala: Plastikoa
• CRI: >80 (Color Rendering Index)
• Baliokidea: Approximately 200W incandescent equivalent.
• Energia-eraginkortasuna: Saves up to 88% on energy compared to traditional lighting.

Figure 2.1: The Lepro 11-inch LED Ceiling Light providing warm and cozy illumination in a living room setting.

Figure 2.2: The ceiling light illuminating a modern kitchen, showcasing its broad light distribution.

Figure 2.3: The IP54 waterproof design makes this light suitable for bathroom environments.

Figure 2.4: The 24W LED light offers significant energy savings compared to two 100W incandescent bulbs.

Figure 2.5: Product dimensions showing 11-inch diameter and 1.97-inch height, ideal for low ceilings.

3. Instalazio gida

Follow these steps for safe and proper installation of your Lepro LED Ceiling Light. Ensure power is off before starting.

1. Itzali energia: Argi-tresna kontrolatzen duen zirkuitu-etengailua bilatu eta itzali korrontea. Egiaztatu korrontea itzalita dagoela bolumen-neurgailu bat erabiliz.tage probatzailea.
2. Remove Mounting Bracket: Gently pull the spring tabs on the light fixture and remove the mounting bracket from the back of the lamp gorputza.
3. Measure Hole Spacing: Use the removed mounting bracket to measure the appropriate hole spacing for your ceiling type. The bracket supports a minimum distance of 2.7 inches and a maximum distance of 4 inches for mounting holes.
4. Instalatu muntatzeko euskarria:
   • Egurrezko sabairako: Use the provided screws to directly fix the mounting bracket to the wooden ceiling.
   • For Cement Ceiling: Drill two holes at the measured spacing, insert the plastic anchors, then fix the mounting bracket with screws.
   • For Junction Box: Align the mounting bracket with the existing holes on your junction box and secure it with the provided screws.
5. Prestatu kableatua: Open the waterproof wiring compartment on the light fixture.
6. Konektatu kableak: Insert the household electrical wires into the electrical connections labeled 'N' (Neutral) and 'L' (Live) on the fixture. Ensure a secure connection.
7. Kableatu segurua: Straighten out the wires, place the rubber sealant into position, and close the wiring compartment securely.
8. Muntatu Lamp: Align the light fixture with the installed mounting bracket. Pull the lamp's spring tabs and latch it onto the bracket, pushing the light firmly against the ceiling until it clicks into place.
9. Berrezarri boterea: Piztu berriro etengailuan.

Figure 3.1: Visual guide for installing the ceiling light, showing bracket removal, wire connection, and final mounting.

4. Funtzionamendu-argibideak

This Lepro LED Ceiling Light is designed for simple operation.

• Piztu/Itzali: Erabili hormako etengailu estandar bat argia pizteko edo itzaltzeko.
• Erregulagarria ez: As noted in the safety information, this fixture is not dimmable. It will operate at full brightness when switched on.

5. Mantentzea

The Lepro LED Ceiling Light requires minimal maintenance due to its integrated LED design and durable construction.

• Garbiketa: Ziurtatu argindarra itzalita dagoela garbitu aurretik. Garbitu aparatua zapi leun, lehor edo apur bat lehor batekin.amp oihal. Ez erabili produktu kimiko gogorrak edo garbitzaile urratzaileak.
• Bonbilla ordezkatu beharrik ez: The LED lights are integrated and designed to last over 20,000 hours, eliminating the need for bulb replacement.
• Ikuskapena: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified professional.

6. Arazoak

If you encounter issues with your Lepro LED Ceiling Light, refer to the following common troubleshooting steps:

7. Zehaztapenak

8. Bermea eta Laguntza

This Lepro LED Ceiling Light comes with a 2 urteko bermea fabrikatzailearengandik.

For further assistance, product information, or to explore other Lepro products, please visit the official Lepro Store:

Visit the Lepro Store