1. Sarrera
This manual provides instructions for the safe and proper use of your PK Power AC Power Cord Cable, designed for the QFX SBX-410602 Speaker with Built-in Amplifier Bluetooth. Please read this manual thoroughly before use and retain it for future reference.
2. Segurtasun informazio garrantzitsua
Funtzionamendu segurua bermatzeko eta kalteak saihesteko, jarraitu neurri hauek:
- liburukiatage Bateragarritasuna: Ziurtatu entxufearen bolumenatage matches the cable's input specifications (100-240V 50-60Hz).
- Konexio egokia: Always insert the plug fully into the outlet and the device. A loose connection can cause overheating.
- Saihestu kalteak: Ez tolestu, bihurritu edo tiratu kablea gehiegi. Saihestu objektu astunak kablearen gainean jartzea.
- Ingurumen-baldintzak: Do not expose the cable to water, excessive moisture, or extreme temperatures. Use indoors only.
- Deskonexioa: Always grasp the plug, not the cable, when disconnecting from the power source or device.
- Babes-ezaugarriak: This cable includes Over Voltage Babesa (OVP), Gehiegizko Korrontearen Babesa (OCP) eta Zirkuitu Laburren Babesa (SCP) zure gailua babesteko.
- Ziurtagiria: PK-Power products are CE / FCC / RoHS certified, ensuring they meet safety and quality standards.
3. Konfiguratzeko argibideak
Follow these steps to connect your PK Power AC Power Cord Cable to the QFX SBX-410602 Speaker:
- Ikuskatu kablea: Before connecting, visually inspect the power cord for any signs of damage, such as cuts, frayed wires, or bent prongs. Do not use if damaged.
- Locate Power Port: Identify the AC power input port on your QFX SBX-410602 Speaker. This port is typically located on the rear panel of the speaker.
- Connect to Speaker: Insert the female end of the PK Power AC Power Cord Cable firmly into the AC power input port of the QFX SBX-410602 Speaker. Ensure a snug fit.
- Konektatu korronte-hartunera: Insert the male end of the power cord into a standard wall power outlet. Ensure the outlet provides the correct voltage (100-240V).
- Egiaztatu konexioa: Once both ends are connected, ensure the cable is not strained or kinked. The speaker should now be ready to receive power.
Image 1: The PK Power AC Power Cord Cable uncoiled, displaying its male plug and female connector ends. This illustrates the cable's design for connecting to a power source and a device.
4. Funtzionamendu-argibideak
The PK Power AC Power Cord Cable is a passive component designed to supply electrical power. Once properly connected, it facilitates the power flow to your QFX SBX-410602 Speaker. There are no operational controls on the cable itself.
- Ensure the cable is securely connected at both ends before powering on your speaker.
- Refer to your QFX SBX-410602 Speaker's manual for specific power-on procedures and operational details.
5. Zainketa eta Mantentzea
Proper care extends the life of your power cord and ensures safe operation:
- Garbiketa: Disconnect the cable from all power sources before cleaning. Wipe with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Biltegiratzea: Erabiltzen ez duzunean, kablea askatasunez bildu. Saihestu estuki biltzea edo tolesturatzea, barneko kableak kaltetu baititzake. Gorde leku fresko eta lehor batean, eguzki-argitik babestuta.
- Ohiko ikuskapena: Periodically check the cable for any signs of wear, cuts, or damage, especially near the plugs. Replace immediately if damage is found.
Image 2: The PK Power AC Power Cord Cable neatly coiled, demonstrating proper storage to prevent damage and tangling.
6. Arazoak
If your QFX SBX-410602 Speaker is not receiving power, consider the following:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Speaker not powering on. | Kablea ez dago guztiz konektatuta. | Ensure both ends of the power cord are securely plugged into the speaker and the wall outlet. |
| Speaker not powering on. | Hormako entxufea ez dago aktibo. | Test the wall outlet with another device to confirm it is supplying power. Check circuit breakers if necessary. |
| Speaker not powering on. | Kaltetutako korrontea. | Inspect the power cord for visible damage. If damaged, discontinue use and replace the cable. |
| Intermittent power to speaker. | Loose connection or internal cable damage. | Ensure connections are tight. If the issue persists, the cable may be faulty and require replacement. |
Arazoa konpontzeko urratsek ez badute konpontzen, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.
7. Produktuaren zehaztapenak
- Marka: PKPOWER
- Sarrera boltage: 100-240V AC
- Maiztasuna: 50-60Hz
- Konektore mota: Male-to-Female (Standard AC Power Connector)
- Saltoki kopurua: 1 (for connecting to a single device)
- Babes-ezaugarriak: Voltage Babesa (OVP), Gainkorrontearen Babesa (OCP), Zirkuitu Laburren Babesa (SCP)
- Ziurtagiriak: CE, FCC, RoHS betetzen ditu
- Bateragarritasuna: Specifically designed for QFX SBX-410602 Speaker with Built-in Amplifier Bluetooth.
- Fabrikatzailea: PKPOWER
- ASIN: B07BR4DMYV
- GTIN/UPC: 716833581011
8. Bermea eta bezeroarentzako laguntza
PK-Power stands by the quality of its products. For any inquiries or assistance, please contact our customer service team.
- Bezeroarentzako arreta: Our friendly and reliable customer service will respond to you within 24 hours.
- Itzulketak/Ordezkapenak: Refer to your purchase platform's return policy for details on refunds or replacements.
Laguntza gehiago behar baduzu, bisitatu PKPOWER Store on Amazon.