Nerf Modulus Ghost Ops Shadow ICS-6 Instruction Manual

Segurtasun informazio garrantzitsua

WARNING: CHOKING HAZARD - Small parts may be generated. Not for children under 3 years.

Ez apuntatu begietara edo aurpegira. Erabili NERF dardo ofizialak soilik. Baliteke beste dardo batzuek ez betetzea segurtasun-arauak. Ez aldatu dardoak edo blasterra.

Erabilera bitartean helduen gainbegiratzea gomendatzen da.

1. Konfigurazioa

1.1 Paketatzea

Kontu handiz atera osagai guztiak paketetik. Ziurtatu 'Zer dago kutxan' atalean zerrendatutako pieza guztiak daudela.

• Blaster
• Barrel Extension
• 6 Dardoak
• Argibideak

Image 1.1: The Nerf Modulus Ghost Ops Shadow ICS-6 blaster and its components as seen in the retail packaging.

1.2 Bateriaren instalazioa

The blaster requires 3 AAA alkaline batteries for the illumination feature. Demo batteries are included.

1. Locate the battery compartment on the blaster.
2. Phillips bihurkin bat erabiliz (ez dago barne), askatu bateriaren konpartimentuko estalkia.
3. Insert 3 new AAA alkaline batteries, ensuring correct polarity (+/-).
4. Jarri bateriaren konpartimenduaren estalkia eta lotu torlojuarekin.

Image 1.2: The blaster's battery requirement for its illumination feature.

1.3 Assembling the Blaster

The Illuminator Barrel can be attached to the front of the blaster.

1. Align the barrel extension with the front attachment point of the blaster.
2. Push the barrel extension firmly until it clicks into place.
3. To remove, press the release button (if present) or pull the barrel extension off.

Image 1.3: Attaching the illuminator barrel to customize the blaster.

Image 1.4: Detaching the illuminator barrel from the blaster.

2. Operating the Blaster

2.1 Loading Darts

The Shadow ICS-6 blaster features a breech-load design with an internal clip system that holds up to 6 darts.

1. Open the breech by pulling back the priming handle.
2. Insert one dart at a time into the internal clip system. Ensure darts are fully seated.
3. Close the breech by pushing the priming handle forward until it locks.

Image 2.1: Loading a dart into the blaster's internal clip system.

2.2 irudia: Xehetasun zehatza view of dart loading.

2.2 Firing the Blaster

Once darts are loaded and the blaster is primed:

1. Aim the blaster at a safe target.
2. Pull the trigger to fire one dart.
3. To fire another dart, repeat the loading and priming steps.

Image 2.3: The blaster and included darts.

2.3 Illumination Feature

The blaster features a clear housing that illuminates when the light activator is pressed. This allows for both stealth and illuminated modes.

• Ezkutuko modua: Keep the blaster clear (lights off) for discreet action.
• Illuminated Mode: Press the light activator button to illuminate the blaster, useful for low-light environments. The attached Illuminator Barrel will also light up.

Image 2.4: The blaster in illuminated mode.

Image 2.5: The blaster in clear, stealth mode.

Image 2.6: The illuminator barrel glowing when attached.

3. Mantentzea

3.1 Arreta orokorra

• Keep the blaster clean by wiping it with a dry cloth. Do not use harsh chemicals or immerse in water.
• Store the blaster in a cool, dry place away from direct sunlight.
• Remove batteries if the blaster will not be used for an extended period to prevent leakage.

3.2 Dardoen zaintza

• Use only official Nerf darts to ensure optimal performance and safety.
• Inspect darts for damage before use. Damaged darts can affect performance and potentially jam the blaster.
• Do not modify darts.

4. Arazoak

5. Zehaztapenak