Produktua amaituview
The TOPENS DKC1000 is an automatic sliding gate opener designed for heavy-duty slide gates weighing up to 1800 lbs and up to 40 ft in length. It features a 350W 1/2 HP DC motor, a smart PCB control board, and is suitable for outdoor use with its durable galvanized steel base plate and plastic ABS cover. It offers quiet operation and is compatible with battery power and solar charging systems.

Segurtasun Informazioa
Read all instructions carefully before installation and use. Ensure all safety devices are properly installed and functioning. Keep children and pets away from the gate area during operation. In case of power outage, use the manual release key to operate the gate.
Paketearen edukia
The TOPENS DKC1000 kit typically includes:
- Atezaina irekitzeko unitatea
- 2 x M12 Remote Controls
- Imanen muntaia
- Eskuz askatzeko giltza
- 20 ft Chain (adjustable length)
- Rust-proof Mounting Hardware
- Argibide eskuliburua
(Note: Additional accessories like solar panels, batteries, keypads, and photo eyes are sold separately.)
Konfigurazioa eta Instalazioa
Proper installation is crucial for the safe and efficient operation of your gate opener.
Gunearen Prestaketa
- Ziurtatu atea leunki irristatzen dela eta behar bezala lerrokatuta dagoela.
- Garbitu atearen bidean dauden oztopo guztiak.
- Prepare a stable, level concrete pad for mounting the opener unit.
Irekigailua muntatzea
Securely mount the gate opener unit to the concrete pad using the provided hardware. Ensure the unit is level and positioned correctly relative to the gate chain.

Kateen Instalazioa
Attach the chain to the gate and route it through the opener's sprocket. Adjust the chain tension to ensure it is taut but not overly tight. The chain length is adjustable.
Limit Switch Magnets
Install the limit switch magnets at the desired open and close positions of the gate. These magnets signal the opener to stop the gate's movement.
Kableatua
Connect the power supply (AC 100-120V or 2 x 12V batteries) to the control board. Follow the wiring diagram in the detailed manual for all connections, including optional accessories like photo eyes, keypads, and warning lights.

Funtzionamendu-argibideak
Urruneko Kontrolaren Eragiketa
- Press the button on the remote control to open or close the gate.
- Funtzionamenduan zehar botoia berriro sakatzean, atea gelditu egingo da.
- The remote controls have an operation range of approximately 65 feet.
Eskuzko Eragiketa
In case of power failure or system malfunction, use the manual release key to disengage the motor and operate the gate manually.
Mantentzea
- Ohiko garbiketa: Keep the gate opener unit and the gate track clean from debris, leaves, and dirt to ensure smooth operation.
- Kateen lubrifikazioa: Periodically lubricate the drive chain to prevent rust and reduce friction.
- Ikuskapena: Regularly inspect the gate, mounting hardware, and all connections for any signs of wear, damage, or loose components.
- Bateria egiaztatzea: If using battery backup or solar power, check battery terminals for corrosion and ensure batteries are adequately charged.
- Safety Device Test: Periodically test all safety devices, such as photo eyes, to ensure they are functioning correctly.

Arazoak konpontzea
- Gate Not Moving: Check power supply, remote control battery, and ensure the manual release is fully engaged/disengaged. Inspect for obstructions.
- Gate Stops Mid-Cycle: This could indicate an obstruction, a faulty safety sensor (photo eye), or incorrect limit switch settings.
- Urruneko kontrola ez dabil: Replace remote battery, re-program the remote if necessary, or check for signal interference.
- Ezohiko Zaratak: Inspect the chain for proper tension and lubrication. Check for any loose parts or debris in the mechanism.
- Gate Opens/Closes Partially: Re-adjust the limit switch magnets to ensure they are correctly positioned for the full open and close cycles.
For more detailed troubleshooting, refer to the complete instruction manual or contact TOPENS customer support.
Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Fabrikatzailea | TOPENS |
| Zati zenbakia | DKC1000 |
| Elementuaren pisua | 54.9 kilo |
| Produktuaren neurriak | 15.79 x 9.72 x 22.24 hazbete |
| Elementuaren eredu-zenbakia | DKC1000 |
| liburukiatage | 24 Volt |
| Wattage | 350 watt |
| Zaldi-potentzia | 0.50 HP |
| Soinu Maila | 50 dezibelio |
| Pilak barne? | Bai |
| Pilak behar dira? | Bai |
| Bateria zelula mota | Litio metala |
| Eskuragarri dagoen lehen data | 24ko abuztuaren 2018a |

Bermea eta Laguntza
The TOPENS DKC1000 comes with a 12-month warranty. TOPENS also provides free customer support.
For technical assistance, troubleshooting, or warranty claims, please contact TOPENS customer support.
Visit the official TOPENS webbaliabide gehigarriak eta harremanetarako informazioa lortzeko gunea: www.topens.com







