Fulham Lighting FHSAC1UNV40C FireHorse Hot Spot Plus All-in-One LED Driver & Emergency System User Manual

1. Sarrera

This manual provides essential instructions for the safe installation, operation, and maintenance of the Fulham Lighting FHSAC1UNV40C FireHorse Hot Spot Plus All-in-One LED Driver & Emergency System. This unit integrates an LED driver with an emergency lighting system, offering 0-10V dimming and programmable output for various LED applications. Please read this manual thoroughly before installation and retain it for future reference.

2. Segurtasun informazioa

OHARRA: Risk of electric shock. Installation and servicing must be performed by qualified personnel only. Disconnect power before servicing.

• Ziurtatu kableatu guztiak estatuko eta tokiko araudi elektrikoekin bat datozela.
• Do not install in locations where the ambient temperature exceeds the specified operating range.
• This device is designed for dry and damp kokapenak soilik.
• Proper grounding is required to prevent electric shock.
• Do not attempt to open or modify the unit. There are no user-serviceable parts inside, except for the replaceable battery.

3. Produktua amaitu daview

The FHSAC1UNV40C is a compact, all-in-one solution for LED lighting, combining a high-performance LED driver with an integrated emergency backup system. It features a replaceable battery and supports 0-10V dimming. The output current is programmable, allowing for flexible application with various LED modules.

3.1. irudia: The Fulham FHSAC1UNV40C FireHorse Hot Spot Plus unit, showing the integrated LED driver and emergency battery components.

4. Zehaztapenak

4.1. irudia: Key features of the FireHorse Hot Spot Plus system, including compatibility, installation flexibility, and emergency illumination duration.

5. Konfigurazioa eta instalazioa

GARRANTZITSUA: All installation procedures must be performed by a qualified electrician in accordance with the National Electrical Code and local regulations.

5.1 Instalazioaren aurreko egiaztapenak

• Egiaztatu sarrerako boltage (120-277VAC) matches the building's electrical supply.
• Ensure the LED module's voltage and current requirements are compatible with the FHSAC1UNV40C's output range.
• Confirm the installation environment is suitable (dry/damp location, within specified ambient temperature).

5.2 Kableatzeko jarraibideak

Refer to the wiring diagram provided on the unit label for specific connections. General wiring steps include:

1. Sarrerako potentzia: Connect the AC input wires (Black, White, Green/Ground) to the building's electrical supply.
2. LED irteera: Connect the LED output wires (typically Red/Positive, Blue/Negative) to the LED module.
3. Iluntzeko kontrola: Connect the 0-10V dimming wires (Purple/Dim+, Gray/Dim-) to a compatible 0-10V dimmer or control system.
4. Proba etengailua: Connect the illuminated test switch wires as indicated. This switch is used for manual testing of the emergency function.
5. Bateria konexioa: Ensure the internal battery is properly connected. The unit will begin charging the battery upon initial power-up.

5.3 Programmable Output Current

The output current can be programmed to match the specific requirements of the LED module. Consult the product datasheet or contact Fulham Lighting support for detailed instructions on programming the output current. This typically involves a specific programming device or procedure.

6. Funtzionamendu-argibideak

6.1 Eragiketa normala

When AC power is supplied, the FHSAC1UNV40C operates as a standard LED driver, providing power to the connected LED module. The 0-10V dimming input allows for adjustment of the LED brightness.

6.2 Larrialdi funtzionamendua

In the event of an AC power failure, the unit automatically switches to emergency mode, powering the LED module from its internal battery. The emergency power level (5W or 10W) is user-selectable during installation.

6.1. irudia: Illustration of emergency lighting functionality, where lights illuminate during a power failure.

6.3 Test Switch and Self-Diagnostics

The illuminated test switch provides visual indication of the unit's status and allows for manual testing of the emergency function. The unit also features switchable self-diagnostics, which automatically perform periodic tests of the battery and emergency circuitry. Refer to the unit's label for specific diagnostic indicator patterns.

7. Mantentzea

7.1 Bateria kargatzea

The internal LiFePO4 battery requires a minimum of 12 hours to fully charge after installation or a prolonged power outage. Ensure continuous AC power is supplied to allow for proper battery charging.

7.2 Monthly Testing

Perform a monthly 30-second functional test by pressing and holding the test switch. The LED module should illuminate in emergency mode. Release the switch, and the unit should return to normal operation.

7.3 Annual Testing

Conduct an annual 90-minute (or 180-minute, depending on selected output) full discharge test. Interrupt AC power to the unit for the specified duration. The LED module should remain illuminated for the entire test period. If the LED module does not remain illuminated for the full duration, the battery may need replacement.

7.4 Bateria ordezkatzea

The battery is replaceable. When replacement is necessary, use only the specified Fulham replacement battery (Model FHSBATL2-3.2L). Disconnect AC power before replacing the battery. Dispose of old batteries according to local regulations.

8. Arazoak

If troubleshooting steps do not resolve the issue, contact Fulham Lighting technical support.

9. Bermea eta Laguntza

For specific warranty information and technical support, please refer to the official Fulham Lighting webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa.

Fulham Lighting Contact Information:
Bisitatu www.fulham.com laguntza eta produktuari buruzko informazioa lortzeko.