1. Produktua amaitu daview
This manual provides detailed instructions for the installation, operation, and maintenance of your GIGABYTE Z390 GAMING X motherboard. Designed for Intel 8th and 9th generation Core processors, this motherboard offers a robust foundation for high-performance computing.
Ezaugarri nagusiak
- GIGABYTE Z390 GAMING X Z390/LGA1151/4D4/ATX Motherboard
- Entxufea: LGA1151
- Compatibility: Windows 10 64-bit
2. Instalazio gida
2.1 Paketearen edukia
- GIGABYTE Z390 GAMING X Motherboard
- User Manual and Driver CD (may vary by region)
- SATA datu kableak
- I / O ezkutukoa
2.2 Plaka amaierako diseinua
Familiarize yourself with the motherboard's components and connectors before installation.
This image displays the overall layout of the GIGABYTE Z390 GAMING X motherboard, showing the LGA1151 CPU socket, four DDR4 DIMM slots, multiple PCIe expansion slots, M.2 slots, and various headers.
2.3 PUZaren instalazioa
- Ireki CPUaren socket-aren palanka.
- Carefully align the CPU with the socket, matching the triangular mark on the CPU to the mark on the socket.
- Jarri astiro-astiro CPUa socketean. Ez behartu.
- Itxi entxufearen palanka CPUa finkatzeko.
2.4 RAM instalazioa
- Ireki DIMM zirrikituen bi muturretan dauden klipak.
- Lerrokatu RAM modulua zirrikituarekin, ziurtatu moduluko koska zirrikituan dagoen giltzarekin bat datorrela.
- Sakatu ondo RAM moduluaren bi muturrak klipak bere lekuan sartu arte.
2.5 Txartel grafikoaren (GPU) instalazioa
- Locate the primary PCIe x16 slot (usually the top-most reinforced slot).
- Ireki zirrikituaren amaieran dagoen atxikipen-klip-a.
- Align your graphics card with the slot and press down firmly until it is fully seated and the retention clip locks.
- Secure the graphics card to your PC case with screws.
- Konektatu beharrezko PCIe elikatze-kableak elikatze-iturritik txartel grafikora.
2.6 Storage Device Installation (M.2 SSD / SATA Drives)
- M.2 SSD: Locate the M.2 slots. Remove the M.2 screw and standoff. Insert the M.2 SSD at an angle, then push it down and secure it with the screw.
- SATA unitateak: Connect one end of a SATA data cable to a SATA port on the motherboard and the other end to your SATA HDD/SSD. Connect a SATA power cable from your power supply to the drive.
2.7 Energia-iturriaren konexioak
- Konektatu 24 pineko ATX elikatze-konektore nagusia elikatze-iturritik plaka basera.
- Connect the 8-pin (or 4+4-pin) ATX 12V CPU power connector to the motherboard.
2.8 Front and Rear Panel Connections
Connect the front panel headers (Power LED, HDD LED, Power Switch, Reset Switch, USB, Audio) to their corresponding pins on the motherboard. Refer to the motherboard diagram for exact locations.
This image illustrates the rear input/output panel, detailing the available USB 2.0, USB 3.0, USB 3.1 ports, HDMI output, Ethernet port, and audio jacks for external device connectivity.
3. Hasierako Eragiketa
3.1 Lehenengo abiaraztea eta BIOS/UEFI konfigurazioa
- Osagai guztiak muntatu ondoren, konektatu monitoreari, teklatuari eta saguari.
- Piztu sistema. Sakatu botoia DEL tekla behin eta berriz sakatu abiaraztean BIOS/UEFI konfigurazio utilitatea sartzeko.
- Configure boot order, enable XMP for RAM (if applicable), and set other desired system parameters.
- Gorde aldaketak eta irten BIOS/UEFItik.
3.2 Gidariaren instalazioa
After installing your operating system (e.g., Windows 10 64-bit), install the necessary drivers for the motherboard chipset, audio, LAN, and any other integrated components. These can typically be found on the GIGABYTE official webgunea.
4. Mantentze-jarraibideak
4.1 Garbiketa
Regularly clean dust from your PC components, especially heatsinks and fans, using compressed air. Ensure the system is powered off and unplugged before cleaning.
4.2 BIOS/UEFI eguneraketak
Aldian-aldian egiaztatu GIGABYTE website for BIOS/UEFI updates. Updates can improve system stability, compatibility, and performance. Follow the instructions provided by GIGABYTE carefully when performing a BIOS update.
5. Arazoak
5.1 Energiarik ez / Abiarazi ezinik
- Verify all power cables (24-pin ATX, 8-pin CPU, GPU PCIe power) are securely connected.
- Ziurtatu energia-iturri etengailua ON posizioan dagoela.
- Egiaztatu aurrealdeko paneleko etengailuaren konexioa plaka basearekin.
5.2 Ez dago pantailarik
- Ensure your monitor is connected to the graphics card (or motherboard if using integrated graphics) and is powered on.
- Berriro jarri grafiko-txartela eta RAM moduluak.
- Test with a different monitor or display cable if possible.
5.3 Sistemaren ezegonkortasuna / Matxura
- Check CPU and GPU temperatures. Ensure cooling solutions are properly installed.
- Verify RAM modules are correctly seated and compatible.
- Update drivers and BIOS/UEFI to the latest versions.
5.4 POST Code Errors
If your motherboard has a POST code display, refer to the GIGABYTE manual for the specific meaning of the displayed code to diagnose the issue.
6. Zehaztapen Teknikoak
| Ezaugarri | Xehetasuna |
|---|---|
| Marka | GIGABYTE |
| Ereduaren izena | Z390 GAMING X |
| CPU Socketa | LGA 1151 |
| Prozesadore bateragarriak | Intel Core 8th and 9th Generation (i7-8700K, i9-9900K, i5-10600K) |
| Txip mota | Intel Z390 |
| RAM teknologia | DDR4 |
| Memoria Erlojuaren Abiadura | 4400 MHz arte |
| RAM edukiera maximoa | 64 GB |
| Memoria zirrikituak | 4 |
| Energia konektore nagusia | 24 pin |
| Interfaze Grafikoa | Integrated (CPU dependent) |
| PCIe Bus Standard | PCIe 3.0 |
| Total SATA Ports | 6 |
| USB portuak guztira | 9 (including 2x USB 2.0) |
| Total PCIe Ports | 6 |
| Pisua | 1 Kilogramo |
| Plataforma | Leihoak |
7. Bermearen informazioa
This product is covered by a manufacturer's warranty of 2 years. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official GIGABYTE warranty policy on their webgunea.
8. Bezeroarentzako arreta
For further assistance, technical support, or driver downloads, please visit the official GIGABYTE webgunea: www.gigabyte.comMaiz egiten diren galderen orriak eta komunitate foroak ere aurki ditzakezu bertan.
