Utilitech 38971

Utilitech 36-in Under Cabinet LED Light Bar Instruction Manual

Model: 38971 | Brand: Utilitech

Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your Utilitech 36-inch Under Cabinet LED Light Bar. Please read this manual thoroughly before installation and keep it for future reference. This LED light bar is designed to provide efficient and warm white illumination for your indoor spaces, particularly under cabinets.

Segurtasun Informazioa

Produktuari kalterik edo lesiorik ez egiteko, jarraitu segurtasun neurri hauek:

  • Always disconnect power at the circuit breaker before installation, servicing, or cleaning.
  • Produktu hau zuzenduta dago barruko erabilera soilikEz jarri uretan edo hezetasunean.
  • Ensure all electrical connections comply with local codes and ordinances. If you are unsure, consult a qualified electrician.
  • Ez saiatu argi-gailua aldatzen edo desmuntatzen. Barruan ez dago erabiltzaileak konpondu dezakeen piezarik.
  • Avoid looking directly into the LED light source when it is illuminated, as it may cause eye strain.
  • Mantendu ontziratzeko materialak haurren eskura.

Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

  • Utilitech 36-inch Under Cabinet LED Light Bar (1)
  • Urruneko kontrola (1)
  • Muntatzeko hardwarea (torlojuak, aingurak)
  • Argibide eskuliburua (dokumentu hau)
Utilitech 36-inch Under Cabinet LED Light Bar

Image: The Utilitech 36-inch Under Cabinet LED Light Bar, showing its slim profile and white finish.

Konfigurazioa eta Instalazioa

The Utilitech LED Light Bar is designed for semi-flush under-cabinet mounting. Follow these steps for proper installation:

  1. Instalazio eremua prestatu: Choose a suitable location under a cabinet. Ensure there is a power outlet nearby for the corded electric connection. Clean the mounting surface.
  2. Markatu Muntatze Puntuak: Hold the light bar in the desired position and mark the locations for the mounting screws. Use a pencil to mark through the mounting holes on the fixture.
  3. Zulatzeko zulo pilotuak: Using an appropriate drill bit for your cabinet material, drill pilot holes at the marked locations. If mounting into drywall, use the provided wall anchors.
  4. Secure the Light Bar: Align the light bar with the pilot holes and secure it using the provided mounting screws. Ensure the fixture is firmly attached and level.
  5. Konektatu energiara: Plug the light bar's power cord into a standard 110-volt electrical outlet.

Oharra: For a clean installation, consider routing the power cord discreetly using cable clips (not included) or by drilling a small hole through the cabinet if permissible and safe.

Funtzionamendu-argibideak

Your Utilitech LED Light Bar is controlled via the included remote control.

  • Piztu/Itzali: Sakatu ON button on the remote to turn the light bar on. Press the OFF botoia itzaltzeko.
  • Distira doitzea: Erabili + eta - buttons on the remote to increase or decrease the brightness of the light. The light bar provides up to 800 lumens of warm white light.
  • Urruneko kontrolaren barrutia: Ensure the remote control is pointed towards the light bar for optimal signal reception. The effective range may vary depending on obstacles.

Mantentzea

The Utilitech LED Light Bar requires minimal maintenance.

  • Garbiketa: Before cleaning, ensure the light bar is unplugged from the power outlet. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as they may damage the finish.
  • LED argiaren iturria: The LED light source is integrated and non-removable. It is designed for long-lasting performance and does not require bulb replacement.

Arazoak konpontzea

If you encounter issues with your light bar, refer to the following common problems and solutions:

ArazoaKausa posibleaIrtenbidea
Argi-barra ez da pizten.
  • Ez dago korronterik entxufean.
  • Urruneko kontroleko bateria agortuta dago.
  • Urrutiko agintea ez dago parekatuta edo akastuna.
  • Egiaztatu entxufea eta zirkuitu-hauslea.
  • Ordeztu urrutiko agintearen bateria.
  • Ensure remote is pointed at the light bar. If issues persist, contact customer support.
Argia ahula da edo keinuka ari da.
  • Distira ezarpena baxua da.
  • Potentzia-konexio soltea.
  • Handitu distira urrutiko agintea erabiliz.
  • Ziurtatu korronte-kablea ondo konektatuta dagoela.
Urrutiko agintea ez da erantzuten.
  • Bateria agortuta dago edo gaizki sartuta dago.
  • Obstruction between remote and light bar.
  • Replace battery and check polarity.
  • Kendu edozein oztopo.

Zehaztapenak

EzaugarriXehetasuna
MarkaUtilitech
Modelo zenbakia38971
Produktuaren neurriak36.5 x 3.25 x 1.5 hazbete
Elementuaren pisua2.2 kilo
Energia iturriaKable elektrikoa
liburukiatage110 Volt
Wattage9.21 watt
Distira800 lumen
Argi KoloreaZuri Beroa
Argi iturri motaLED (Non-Removable)
Kontrol-metodoaUrruneko Kontrola
Instalazio motaSemi Flush Mount / Under Cabinet
Barruko/Kanpoko erabileraBarruan
Akabera motaEskuilatua
Itzala MaterialaMetala
Muntaia BeharrezkoaEz

Bermearen informazioa

This Utilitech product comes with a limited warranty. Please refer to the warranty card included with your product packaging for specific terms, conditions, and duration of the warranty. Keep your purchase receipt as proof of purchase for any warranty claims.

Bezeroarentzako Arreta

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Utilitech customer support. Contact information can typically be found on the product packaging or the manufacturer's official webgunea.

Fabrikatzailea: Utilitech

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.